Challenger EV1020 10000 lb ALI Certified Inground Car Lift

$12,248.00

Challenger EV1020 10000 lb ALI Certified Inground Car Lift Challenger’s electric hydraulic cassette-style 10,000 lb. capacity inground lift meets the demands of professional service facilities. With a smaller footprint, your shop can maximize service bays. The EV1020 has 3-stage front and rear arms

SKU: IRG0292 Categories: ,
Description

Looking for a reliable inground lift? The Challenger EV1020 delivers the durability, safety and ease of use that busy service bays demand. This page covers the Challenger EV1020 features, specifications, installation planning and care so you can buy with confidence.

Challenger EV1020 Features and Specifications

Challenger EV1020 10000 lb ALI Certified Inground Car Lift

  • 10,000 lb. lift capacity
  • 3-stage front and 3-stage rear arms provide access to the lift points of a wide range of cars and trucks, maximizing revenue potential
  • Also available with a drive-on style pad (XP9) to aid in quick vehicle spotting for express bays
  • 8 1/2” diameter chrome pistons provide greater stability under load
  • Chrome non-breathing ram style cylinder provides for longer lift life
  • Enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings
  • Long bearing contact provides increased stability
  • Mechanical lock engages every 3″ allowing ergonomic working height for technicians to increase productivity and minimize fatigue
  • Stainless steel air lock release cylinder promotes longer working life with its corrosion resistant design
  • Fully-contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground
  • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
  • 87″ drive-thru accommodates wider vehicles, minimizes tire damage and provides for easy drive-on
  • Wide range of upgrades to further customize your fleet
  • Premium powder coat finish on bolsters and arms provides long-lasting durability
Model Number EV1020
Lifting Capacity 10,000 lbs.
Arms 3-stage front/3-stage rear
Stroke 68”
Rise Height 74”
Width Overall 97″
Drive-Thru Clearance 87”
Reach (Arm Minimum) 19.625”
Reach (Arm Maximum) 42.125”
Screw Pad Height 3.875” – 6”
Capacity 2,500 lbs. per arm
Guide Plunger Diam. 8.5”
Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph
Speed of Rise 38 s
Air Required 90 – 120 psi
ALI/ETL Certified Yes
Super Structure Colors Red, Blue, Black

Challenger EV1020 Photos

Challenger EV1020 inground liftChallenger EV1020 inground lift view 2Challenger EV1020 inground lift view 3Challenger EV1020 inground lift view 4

Key Highlights of the Challenger EV1020

Here is a quick summary of what stands out on this inground lift:

  • Challenger EV1020 10000 lb ALI Certified Inground Car Lift
  • 10,000 lb. lift capacity
  • Also available with a drive-on style pad (XP9) to aid in quick vehicle spotting for express bays
  • 8 1/2” diameter chrome pistons provide greater stability under load
  • Chrome non-breathing ram style cylinder provides for longer lift life

Why Shops Choose the Challenger EV1020

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Inground Lift

Investing in the right inground lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the Challenger EV1020

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the Challenger EV1020

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the Challenger EV1020 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Inground Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right inground lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Challenger website.

Challenger EV1020 FAQs

Do I need special concrete for the Challenger EV1020?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Challenger EV1020 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the inground lift correctly, which protects your investment and your technicians.

How is the Challenger EV1020 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Challenger EV1020 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Inground Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Challenger EV1020 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a inground lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Challenger EV1020 10000 lb ALI Certified Inground Car Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery