Rotary LT35A 3,500 lb capacity Air-Hydraulic Lifting Table
$12,285.00
The adjustable LT35A lift table has the lifting capacity to support both heavy vehicle components and the RT30 repair table. With both tilt and sliding adjustments, these features help to ease the removal and installation of batteries. AIR-OPERATED WITH MECHANICAL LOCKS EXTRA-WIDE BASE FOR STABILITY
The Rotary LT35A is a professional-grade EV battery lift table built for shops that need dependable performance every day. Below you will find the full features and specifications of the Rotary LT35A, along with setup tips, maintenance advice and answers to common questions.
Rotary LT35A Features and Specifications
Features
SPLIT SLIDING TOP
The lift platform extends an additional 8” allowing the table to shift in sections. This feature eliminates the need to move the entire table for multi-positioning of larger loads.
Platform easily locks and unlocks for fine adjustment of under vehicle placement.
REAR PLATFORM TILT ADJUSTMENT
Conveniently adjust the table while under load with no need to remove battery, parts, or tools from platform. Fine adjust the tabletop with the object being removed or installed on the vehicle by positively tilting from the rear by up to 1°.
To tilt, thread jack screws located at the rear of lift table upward using allen wrench or allen socket until correct angle is met.
The table platform adjusts up to a 1° tilt angle to adapt to an uneven floor to be level with vehicle.
SIDE TO SIDE PLATFORM ALIGNMENT
Easily shift tabletop left or right by 1” by unlatching red toggle handles on mid table and pushing or pulling “U” shaped handles until desired position is reached. Reclamp handles to lock the new platform position.
AIR RELEASED MECHANICAL LOCKS
This redundant safety measure secures the lift (versus relying solely on
the hydraulic system) with additional locking security. Standard with 9 locking positions at every 2-3/4”, the first lock is at a 32” table top height.
AIR SYSTEM CONTROLS
Standard air over hydraulic pump is easier to operate and far more accessible than manual, electric or battery pumps. Manual pumps are slow and require effort. Electric is less available in bays. Batteries require charging and maintenance lessening their dependability.
Air connection is conveniently placed for easy access
Air lock release is operated by a simple toggle switch
FOOT PEDAL CONTROLS RAISE AND LOWER LIFT
Push top of foot pedal to lower table
Push rear of foot pedal to raise table
FIXTURING HOLES ON LIFT TOP SURFACE
Threaded 10mm holes on tabletop for attaching mounts and brackets allow for a broader array of service functions.
MULTI-DIRECTIONAL CASTERS
Large 3600 casters with rotational locks provide easier movement and directional control.
- Locking a single caster enables easier movement versus swivel casters on only one end of lift.
- When moving the lift table, the casters may be locked directionally by pressing the blue foot tab downward.
- For ease of fore/aft movement only lock one front caster.
- Lock the lift table into desired position by pressing only the caster locking foot tab.
Specifications
|
Lift Table Capacity |
3,500 lbs. |
| Maximum Rise Height | 70 1/8″ |
| Collapsed Height | 29″ |
| Overall Width | 35 1/2″ |
| Overall Length | 102 1/8″ |
| Deck Width | 31 7/8″ |
| Deck Length | Closed: 73 3/8″
Open: 81 3/8″ |
| First Locking Positions* | 34″ Table Height |
| Air Requirements | 90-120 psi
302-8.3 bar |
| Clearance | 6 3/4″ |
| Overall Weight | 1,375 lbs |
*10 locking positions with 2 3/4″ horizontal travel between each.
Standard color is black.
Rotary LT35A Photos




Key Highlights of the Rotary LT35A
Here is a quick summary of what stands out on this EV battery lift table:
- Platform easily locks and unlocks for fine adjustment of under vehicle placement.
- The table platform adjusts up to a 1° tilt angle to adapt to an uneven floor to be level with vehicle.
- Air connection is conveniently placed for easy access
- Air lock release is operated by a simple toggle switch
- Push top of foot pedal to lower table
Why Shops Choose the Rotary LT35A
c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`
Benefits of a Quality EV Battery Lift Table
The best EV battery lift table is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the Rotary LT35A
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the Rotary LT35A
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the Rotary LT35A from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of EV Battery Lift Tables to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right EV battery lift table for your shop.
For product manuals, technical documentation and manufacturer details, visit the official Rotary website.
Rotary LT35A FAQs
Do I need special concrete for the Rotary LT35A?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Rotary LT35A or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the EV battery lift table correctly, which protects your investment and your technicians.
How is the Rotary LT35A shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Rotary LT35A come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
Atlas 6PL Open Center Low Rise 6000 lb Capacity Scissor Lift
Atlas 6PL Open Center Low Rise 6000 lb Capacity Scissor Lift The Atlas® 6PL 6,000 lb. capacity low rise lift is ideal for quick service work situations involving tire and brake work.The open center design of the 6PL low rise lift also allows easier access to the underside of any vehicle being lifted
BendPak LR-10000 10000 lb Capacity Low-Rise Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
BendPak MD-6XP Car Lift
BendPak P-9000LT Car Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.