Atlas Platinum PVL14 ALI Certified Complete Alignment Combo

$18,649.00

The Atlas® Platinum PVL14 is a four post commercial grade Heavy-Duty lift designed with the professional shop in mind. This lift can accommodate a variety of cars, vans, SUVs, trucks, and even some light & medium duty commercial vehicles. The Platinum PVL14 uses a high strength cable system (with a

SKU: IRG0249 Categories: ,
Description

The Atlas PVL14 is a professional-grade alignment combo kit built for shops that need dependable performance every day. Below you will find the full features and specifications of the Atlas PVL14, along with setup tips, maintenance advice and answers to common questions.

Atlas PVL14 Features and Specifications

Features and Benefits:

  • ALI CertifiedCombo iincludes PVL14 14,000 lb. lift, Alignment Kit, & two RJ7000 rolling jacks
  • Heavy Duty, Commercial Grade
  • Lift is Extra Tall, Extra Wide & Extra Long
  • Lift has Air Operated Single Point Lock Release (External Air Supply Required – NOT INCLUDED)
  • Steel Approach Ramps Included
  • Additional Drive off Ramps Available (Sold Separately)
  • Mounting Hardware Included
  • Alignment Kit Includes Spacers, Ramps, Slip Plates, and Turntables
  • Alignment Kit Bolts on Runways
  • Truck Adapter Set for each Jack Included
  • This part number FREIGHT PREPAID

Atlas® Platinum PVL14 Specifications

  • Capacity 14,000 lb.
  • Lifting Height 76 1/2″ (6′ 4 1/2″)
  • Overall Width Of Columns (Without Motor) 131 3/4″ (10′ 11 3/4″)
  • Overall Width Of Columns (With Motor) 140 1/2″ (11′ 8 1/2″)
  • Overall Length With Approach Ramp 251 1/2″ (20′ 11 1/2″)
  • Length Between Columns 196″ (16′ 4″)
  • Runway Length 205 1/2″ (17′ 1 1/2″)
  • Runway Width 20″
  • Thickness Of Runway 7″
  • Width Between Runways 42 3/4″ (w/ Rail 39 1/4″)
  • Outside Runway To Outside Runway 83 1/8″ (6′ 11 1/8″)
  • Clearance Under Runways 69 1/2″ (5′ 9 1/2″)
  • Clearance Between Columns 116 3/8″ (9′ 8 3/8″)
  • Height Of Columns 92 1/2″ (7′ 8 1/2″)
  • Maximum Wheel Base 195″ (16′ 3″)
  • Drive Thru 94 1/2″ (7′ 10 1/2″)
  • Air Requirement 85-115 PSI (EXTERNAL AIR SUPPLY REQUIRED)
  • Motor/Electrical Requirement 220 volt single (1) phase.(A 30 amp breaker is recommended)
  • Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)
  • Shipping Weight 2,800 LBS.
  • Requires a minimum of 6″ of concrete with a 3000 psi. rating

 

The Atlas® Platinum RJ7000 Specifications:

  • Minimum Width: 36″
  • Maximum Width: 45 1/2″
  • Distance Between Runway Capability: 36″ – 45″
  • Minimum Lifting Height: 12 1/2″
  • Maximum Lifting Height (w/ Adapters): 27 1/2″
  • Double Screw-Up Adapter Pad 1 1/2″ – 4″
  • Air Requirement: 70-115 PSI
  • Shipping Weight: 390 lbs

 

Atlas PVL14 Photos

Atlas PVL14 alignment combo kitAtlas PVL14 alignment combo kit view 2Atlas PVL14 alignment combo kit view 3Atlas PVL14 alignment combo kit view 4

Key Highlights of the Atlas PVL14

Here is a quick summary of what stands out on this alignment combo kit:

  • Features and Benefits:
  • ALI CertifiedCombo iincludes PVL14 14,000 lb. lift, Alignment Kit, & two RJ7000 rolling jacks
  • Heavy Duty, Commercial Grade
  • Lift is Extra Tall, Extra Wide & Extra Long
  • Lift has Air Operated Single Point Lock Release (External Air Supply Required – NOT INCLUDED)

Why Shops Choose the Atlas PVL14

c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`

Benefits of a Quality Alignment Combo Kit

Investing in the right alignment combo kit improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the Atlas PVL14

c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`

Installation and Setup

c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`

Safety and Maintenance Tips for the Atlas PVL14

c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`

Buy the Atlas PVL14 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Alignment Combo Kits to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right alignment combo kit for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Atlas website.

Atlas PVL14 FAQs

Do I need special concrete for the Atlas PVL14?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Atlas PVL14 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the alignment combo kit correctly, which protects your investment and your technicians.

How is the Atlas PVL14 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Atlas PVL14 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Alignment Combo Kit

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Atlas PVL14 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a alignment combo kit with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Atlas Platinum PVL14 ALI Certified Complete Alignment Combo”

Your email address will not be published. Required fields are marked *

Shipping & Delivery