BendPak HDS-14LSXE 14,000-lb. ALI Certified Alignment Lift / Limo Extended / Includes Turnplates and Slip Plates

$13,895.00

Extended-Length Alignment Lift Offers 14,000 lbs. of Power This model is essential for hundreds, if not thousands, of shops across the country. Busy bays are going to service a variety of vehicles, and depending where you work, you’re likely to get some exceptionally big vehicles in need of alignmen

SKU: IRG0223 Categories: ,
Description

Looking for a reliable alignment lift? The HDS-14LSXE Alignment Lift delivers the durability, safety and ease of use that busy service bays demand. This page covers the HDS-14LSXE Alignment Lift features, specifications, installation planning and care so you can buy with confidence.

HDS-14LSXE Alignment Lift Features and Specifications

Slip plates

Turn plates in the front and multi-caster slip plates in the back allow for perfectly precise, free-floating alignments.

Deluxe Turnplates

Aluminum-alloy construction turn plates are easily positioned using BendPak’s turn plate pockets. Larger and more robust than our previous slip-plate design, they’re also lighter in construction and feature dual “popsicle gap stops” for your convenience. Angled steel lock pins conveniently hold the plate in place when you want to use your machine strictly as a maintenance or storage lift.

Dual-hub cable sheaves

To increase longevity, ensure low cost of ownership and keep your purchase low-maintenance over time, we use the biggest and best sheaves throughout the lift. Massive 10.5” diameter cable sheaves are held within the runway cross tubes, outfitted with 2.25” diameter sheave axles that are equally durable.

Heavy-duty aircraft cable

These cables are meant to be used continuously for years on end without issue. They’re extremely resistant to rubbing and other abrasions (e.g., weather, chemicals, hydraulic oil). A 1/2” diameter 6 x 25 aircraft-quality stainless-steel lifting cable runs through each column.

Adjustable height locking positions

No need to reach or bend for the turn plates. Every few inches, a convenient built-in safety lock will let the runways auto-engage into the post. All locks engage simultaneously as the runways evenly ascend the columns.

Built-in lubrication

Grease fittings make it easy to focus on the alignment of your wheels without worrying about the constant lubrication of the sheaves.

Flow restrictor

You’ll probably never experience a hose rupture, but we have you covered just in case. BendPak’s unique hydraulic flow divider provides a smooth descent, making your alignment lift structure safe to operate at all times.

Spring-loaded safety locks

As the alignment lift runways rise to your preferred service level, springs “snap” and hold the locks into place at each ladder position. The spring-loaded, multi-locking devices are adjustable. The design also compensates for slight slopes in your garage.

Push-button pneumatic lock release

A simple push-button pneumatic lock release simplifies lowering operations. Stainless steel and aluminum pneumatic cylinders provide years of maintenance-free service.

Secondary lock system

BendPak doesn’t cut corners on safety, even going above and beyond required safety standards. We offer a slack-cable lock system as a backup safety mechanism that’s ready at all times to shut off the alignment lift in the development of dangerous cable slack.

Integrated design

The cables, sheaves, airlines and hydraulic cylinder run within the lift structure. This congregation of high safety and improved aesthetics gives our lifts a highly distinguished look that also increases user safety and comfort.

Electric-hydraulic power system

The zero-maintenance power system features ergonomically located controls for easy operator access during repetitive daily use.

Non-skid runways

Liquids and hazardous oil spills will not hinder the grip of the runways. Your customers’ vehicles will always rotate on the turn plates without slipping off the ramps. The runway surface is rugged enough to hold tires in all shop conditions.

Longer approach ramps

Longer ramps make it easier to load low ground-clearance vehicles onto the car lift structure. Alignments on these vehicle types are no hassle, and of course, larger trucks and SUVs can glide on just as easily as low ground-clearance sports cars.

Flexible protective conduit

An extra-tough yet flexible conduit protects all airlines and hydraulic hoses from daily wear. You’ll handle your alignment lift with greater confidence knowing the cables won’t deliver sudden shocks, ruptures or fluid leaks.

Rolling bridge jacks

Convert your four-post into a fully functional wheel service lift. Optional rolling jacks make a great addition and increase service capacity. Bridge jacks raise vehicles by the frame, so wheel and brake service can be performed without moving the vehicle to a different car lift. Telescoping arms and frame contact pads extend over runways and target the vehicle’s lifting points. Runways are fully adjustable for different tread widths. Three locking positions offer additional operator control.

Features & Specs

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Runways include rail‐kit for optional accessories
  • Electric/hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal “Anti-Sway” slider blocks in each column
  • Features oversize sheaves and heavy‐duty 1/2” aircraft cable
  • Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature non‐skid surface
  • Optional 7,000 pound capacity bridge jacks available (Model R​BJ7000)

Capacity

Lifting Capacity*
14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle
7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle
7,000 lbs. (3,175 kg)

Rise

A – Min. Runway Height:
7.625″ (194 mm)
B – Max. Rise:
70″ (1,778 mm)
C – Max. Lifting Height:
77.625″ (1,972 mm)
Time to Full Rise:
60 seconds

Outside Dimensions

D – Overall Width:
130″ (3,302 mm)
E – Outside Length:
243″ (6,172 mm)
F – Overall Length:
271″ (6,883 mm)
G – Height of Columns:
93″ (2,362 mm)

Inside Dimensions

H – Width Between Columns:
120″ (3,048 mm)
I – Drive-Thru Clearance:
98″ (2,489 mm)

Runways

J – Runway Width:
20″ (508 mm)
K – Length of Runways:
229″ (5,817 mm)
L – Width Between Runways:
37.5″ (953 mm) or 51″ (1,295 mm)

Alignment

M – Min. 4-Wheel Alignment:
89″ (2,261 mm)
N – Max. 4-Wheel Alignment:
156″ (3,962 mm)
O – Max. 2-Wheel Alignment:
212″ (5,385 mm)

Minimum Wheelbase

Rated Capacity:
165″ (4,191 mm)
75% Capacity:
140″ (3,556 mm)
50% Capacity:
115″ (2,921 mm)
25% Capacity:
95″ (2,413 mm)

Locking

Locking Positions:
13
Lock Spacing:
4

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Shipping

Weight:
3,175-lbs. (1,440 kg)
Dimensions:
241″ x 24″ x 42″ (6,121 mm x 609 mm x 1,066 mm)

 

HDS-14LSXE Alignment Lift Photos

HDS-14LSXE Alignment Lift alignment liftHDS-14LSXE Alignment Lift alignment lift view 2HDS-14LSXE Alignment Lift alignment lift view 3HDS-14LSXE Alignment Lift alignment lift view 4

HDS-14LSXE Alignment Lift at a Glance

  • The HDS-14LSXE Alignment Lift is built for daily professional use.
  • The HDS-14LSXE Alignment Lift is backed by manufacturer support and documentation.
  • Our team can confirm shipping options for the HDS-14LSXE Alignment Lift to your location.
  • The HDS-14LSXE Alignment Lift is a smart fit for shops upgrading their equipment.

Key Highlights of the HDS-14LSXE Alignment Lift

Here is a quick summary of what stands out on this alignment lift:

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets

Why Shops Choose the HDS-14LSXE Alignment Lift

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Alignment Lift

Investing in the right alignment lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the HDS-14LSXE Alignment Lift

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the HDS-14LSXE Alignment Lift

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the HDS-14LSXE Alignment Lift from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Alignment Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right alignment lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

HDS-14LSXE Alignment Lift FAQs

Do I need special concrete for the HDS-14LSXE Alignment Lift?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the HDS-14LSXE Alignment Lift or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the alignment lift correctly, which protects your investment and your technicians.

How is the HDS-14LSXE Alignment Lift shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the HDS-14LSXE Alignment Lift come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak HDS-14LSXE 14,000-lb. ALI Certified Alignment Lift / Limo Extended / Includes Turnplates and Slip Plates”

Your email address will not be published. Required fields are marked *

Shipping & Delivery