BendPak 10APX-181 Two-Post Lift

$7,595.00

BendPak’s AP Series has been meticulously crafted to future-proof your shop, incorporating all the essential attributes for optimal vehicle servicing. This groundbreaking lift effortlessly accommodates Electric Vehicles and seamlessly transitions between symmetrical and asymmetrical configurations.

SKU: IRG0166 Categories: ,
Description

The BendPak 10APX-181 is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the BendPak 10APX-181, along with setup tips, maintenance advice and answers to common questions.

BendPak 10APX-181 Features and Specifications

Setting New Heights in Automotive Lifting

BendPak’s 10APX-181 is an absolute game-changer for mechanics tackling challenging tasks. When it comes to handling larger vehicles, you’re going to want a lift like this. With a towering 181” overhead beam, this lift is tailored for high-roof cargo vans. As part of BendPak’s AP Series, it boasts a robust 10,000 lb. lifting capacity, Low-Pro arms, Bi-Metric™ arms, and more!

The BendPak 10AP features two-post lifts that accommodate taller techs by offering increased lifting heights, ideal for vans.

As the automotive world charges forward with technology, BendPak’s 10APX-181 sets a new standard. This series takes the best aspects from today’s equipment and incorporates it into a brand-new lift. The end result is a lift designed for rugged use, heavy loads, and unwavering operator safety and efficiency.

AP Series – Versatile Convenience

The AP Series brings the best of both worlds – wide and narrow installation options combined into one customizable package. These lifts aren’t just robust and secure, they feature BendPak’s advanced Bi-Metric arms capable of symmetric and asymmetric lifting. Balancing simplicity with sophistication, this intelligent lift design minimizes service and maintenance expenses, enhancing productivity and reducing operating costs.

Empowering the Future of EV Service

With EVs growing in popularity, the 10APX-181 offers an efficient solution for servicing larger EVs like trucks, vans, and sports cars. High tensile-strength steels, low-profile arms, and swing-arms designed to reflect BendPak’s commitment to safety enhancements, empowering technicians to tackle heavier EVs confidently.

EVs demand lifting solutions that safely support their weight. BendPak’s AP Series is the answer. From reinforced construction to thoughtful design features, these lifts match the increased weight of EVs, allowing efficient service on trucks, vans, and more. Low-profile arms and expanded column spacing ensure exceptional under-car access, while robust swing arms with enhanced telescoping movement provide precise lifting support for diverse EV models.

Automatic Swing Arm Restraint System

The AP Series redefines safety with the revolutionary Automatic Swing Arm Restraint System (ASARS). Crafted from forged steel, this patented system locks lift arms securely with a remarkable load-holding force exceeding 2000 pounds. This ensures unmatched stability, preventing unintended swing-arm movement during lift usage and vehicle service operations.

Triple-Telescoping Nested Swing Arms

BendPak’s patented triple-telescoping swing arms set new standards in precision lifting. Unlike conventional designs, these innovative arms offer extended retraction and extension capabilities. The patented nesting feature allows seamless inner sliding arm movement, maximizing efficiency in vehicle lifting.

Low-Pro™ Swing Arms

BendPak’s exclusive Low-Pro™ swing arms redefine versatility, featuring telescoping channels with a shorter profile and dropped-end pad receivers. Engineered for optimal under-car access on lowered chassis-height vehicles, they minimize the risk of damage to vehicle side skirts, running boards, and ground effects. Stackable adapters and spin-up screw pads ensure secure vertical pad placement.

Screw Pads and Adapters

Experience impeccable lifting alignment with optional double-telescoping screw adapters, fortified with resilient polyurethane pads. These adapters ensure level lifting in all conditions, enhancing technician safety.

Innovative Lock System

BendPak’s patented automatic safety lock system has been designed for automatic engagement during lift rising, this system offers an ergonomic single-point release for effortless lock disengagement during descent. Simplifying the operator’s role, this system enhances overall safety and workflow.

BendPak’s Bi-Metric Swing Arms

Designed for exceptional flexibility, Bi-Metric adaptable swing arms empower users to configure lifts symmetrically or asymmetrically, eliminating the need for arm switching. The 2-in-1 design accelerates vehicle servicing, enabling technicians to work more efficiently than ever before.

With the 10AP, you can load up vehicles either symmetrically or asymmetrically to suit your shop’s needs.

BendPak’s lifts embody innovation, safety, and precision and deliver an unparalleled experience for auto repair shops. Equip your shop with the ultimate lifting solution and witness the transformation in efficiency and performance.

Features

  • Durable powder coat finish
  • Expandable top beam accommodates wide or narrow drive-thru configurations
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Exclusive Bi-Metric™ arm design for more versatile arm positioning
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53″ & 59″ tall carriages for superior strength and durability
  • Electric / hydraulic HVLP power system
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3″
  • Automatic arm restraints withstand over 2000-pounds of side force
  • 3/8″ (10mm) High-strength multi-strand galvanized steel equalizing cable
  • Oversized cable sheave diameter reduces cable fatigue
  • Four triple-telescoping arms
  • ALI certified

Specs

  • Lifting capacity: 10,000 lbs. / 4,536 kg
  • Max. Capacity: 5,000 / 2,268 kg (Rear Axle)
  • A – Max. Rise: 75.5 in. / 1,918 mm
  • B – Lifting Height: 79.5 in. / 2,019 mm
  • C – Max. Lifting Height: 89 in. / 2,261 mm
  • D – Min. Height: 4 in. / 102 mm
  • E – Overall Height: 181 in. / 4,597 mm
  • F – Overall Width: 145 in. / 3,683 mm (Wide)
  • G – Outside Columns: 137.5 in. / 3,492 mm (Wide)
  • H – Inside Posts: 118.5 in. / 3,010 mm (Wide)
  • I – Drive-Thru: 107.5 in. / 2,730 mm (Wide)
  • J – Floor to Top Switch: 176 in. / 4,470 mm
  • K – Front Arm Reach: 50 in. / 1,270 mm (max)
  • L – Rear Arm Reach: 59.25 in. / 1,504 mm (max)
  • Max. load per Lift Arm: 2,500 lbs. / 1,134 kg
  • Screw Pad Adjustment: 2 in. / 51 mm
  • Time to Full Rise: ≈ 45 seconds
  • Motor: 220 VAC, 60 Hz, 1 Phase
  • Sound: <70 dB

BendPak 10APX-181 Photos

BendPak 10APX-181 two post lift

BendPak 10APX-181 at a Glance

  • The BendPak 10APX-181 is built for daily professional use.
  • The BendPak 10APX-181 is backed by manufacturer support and documentation.

Key Highlights of the BendPak 10APX-181

Here is a quick summary of what stands out on this two post lift:

  • Durable powder coat finish
  • Expandable top beam accommodates wide or narrow drive-thru configurations
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Exclusive Bi-Metric™ arm design for more versatile arm positioning

Why Shops Choose the BendPak 10APX-181

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Two Post Lift

Reliable equipment is one of the best investments a shop can make. A dependable two post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.

Common Uses for the BendPak 10APX-181

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the BendPak 10APX-181

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the BendPak 10APX-181 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak 10APX-181 FAQs

Do I need special concrete for the BendPak 10APX-181?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak 10APX-181 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the BendPak 10APX-181 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak 10APX-181 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak 10APX-181 Two-Post Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery