BendPak HDS-27 27,000-lb. Capacity ALI Certified Standard Length Four-Post Truck Lift

$27,495.00

Construction, Municipal and Commercial Vehicles Welcome This is where our car lifts really step into the next level of lifting. While the HDS-18E is an entry-level lift in the medium-duty truck category, the HDS-27 is well-suited to take your business well beyond the needs of most private drivers. T

SKU: IRG0157 Categories: ,
Description

The BendPak HDS-27 is a professional-grade four post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the BendPak HDS-27, along with setup tips, maintenance advice and answers to common questions.

BendPak HDS-27 Features and Specifications

Extended runways

Longer runways accommodate a wide variety of vehicle wheelbases, allowing you to steer massive trucks and buses onto our ramps without damaging your vehicle chassis.

Dual-hub cable sheaves

We take the time, cost and effort to bring you the best. Each sheave contained within the runway and cross tubes is a massive 12” in diameter, and the sheave axles, at 4” in diameter, greatly extend the lifespan of your lift by reducing the overall wear put on these parts. Manufacturing sheave components are even bigger than ones offered by our competition, which ensures superior quality in our product. Additionally, BendPak parts always meet or exceed ALI standards for load bearing and safety.

Heavy-duty aircraft cable

Each of the four, 1/2” diameter, 6 x 25 galvanized lifting cables has a 14,000-lb. breaking strength, so a four-post lift as massive as this has the engineering to keep your vehicles safe at all times, especially during periods of heavy use. They won’t rust out or break apart due to bad weather, chemicals or random, floating garage particulate.

Built-in lubrication

The sheaves and sheave axles are fitted with grease nipples to lubricate the parts as they move. This is an essential feature that is also a form of auto-maintenance, so you have little to do during your periodic service checks.

Flow restrictor

This truck lift provides the best that modern hydraulic technology has to offer. Integrated into the hydraulic cylinder is a flow restrictor that provides a safe, slow descent. This is true even in the extremely rare occurrence of a burst or ruptured hydraulic hose.

Large base plates

Substantial 12″ x 12″ base plates support the massive columns.

Spring-loaded safety locks

When the HDS-27 truck lift rises, spring-loaded safety locks engage the moving platforms. Safety ladders are standard and can be adjusted to keep the runways level, which is especially useful for sloped floors.

Push-button pneumatic lock release

The steel and aluminum pneumatic cylinders are aircraft-quality and certified to last for years without service. Lowering the lift release off the locks is done with one push against the pneumatic lock release. Just another simple way we put you in total control of your lift operations.

Secondary lock system

Two locks are better than one! A secondary slack-cable lock engages in case of cable failure, which is unlikely to occur. Still, we prepare our heavy-duty lifts for the worst to keep you working at your best.

Integrated design

Tucked safely into the structure of the four-post lift columns, our lifting cables, airlines, safety latches and cable sheaves are kept away from inclement weather, hazardous chemical erosion and garage dirt/debris. The column structure is the safest and most logical place to conceal the working parts of the lift. Internally routed parts are also crucial to creating the beautiful BendPak aesthetic our customers have come to know and love!

Adjustable height locking positions

Four-post lifts accommodate many different vehicle types, so we’ve made sure you can adjust the height to suit your needs and safely lock your vehicle in place.

Electric-hydraulic power system

Our car lifts are designed with all operator buttons within reach, so you can raise, lower or shut down the system at any time. One-push button controls make the whole process that much smoother.

Non-skid runways

Runways should be built to hold vehicles steady in case of oil spills or wet surface conditions. Even in bad weather, the non-skid runways on this four-post lift are tough, textured and rugged to the touch.

Flexible protective conduit

All of BendPak’s heavy-duty cables are fitted with a protective casing that is flexible and non-conducive to electricity. Your hoses will be intact and serviceable for many years without service, and the non-metallic tubing will ensure you’re never shocked by anything other than the great value of your purchase.

Rolling bridge jacks

Bridge jacks raise the wheels above the runways, which lets operators perform wheel and brake service on the car. Since the HDS-27 Series supports some extremely heavy vehicles, the truck and SUV adapter set is a necessity for wheel/brake service on these lifts. Commercial-grade hydraulic pumps come standard and require 125 PSI and 10 – 20 CFM.

Choose extended length

Some vehicles at the 27,000-lb. lift capacity begin to develop monstrous proportions. Garage trucks, for instance, are wide, tall and feature wide wheel bases. You need a car lift that can handle all those dimensions, plus the weight, without crapping out on you. The super-long HDS-27X may be the better option for your shop. Just be sure to discuss your service needs with a trained BendPak service representative if you need help deciding which 27K four-post lift is right for you.

Features & Specs

  • 27,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Supersized 12″ diameter cable sheaves
  • Galvanized lifting cables
  • Grease nipples
  • Single hydraulic under-runway cylinder
  • Integrated flow restrictor
  • Durable powder coat
  • Spring-loaded safety locks
  • Second lock system on constant guard
  • Fully enclosed lifting cables
  • Multiple adjustable height locking positions
  • Maintenance-free electric hydraulic power system
  • Conveniently positioned operator controls
  • 12″ x 12″ base plates
  • Non-skid runways
  • Optional rolling jack

Capacity

Lifting Capacity*
27,000 lbs. (12,247 kg)
*Max Capacity / Front Axle
13,500 lbs. (6,123 kg)
*Max Capacity / Rear Axle
13,500 lbs. (6,123 kg)

Rise

A – Min. Runway Height:
8.5″ (216 mm)
B – Max. Rise:
60″ (1,524 mm)
C – Max. Lifting Height:
68.5″ (1,740 mm)
Time to Full Rise:
75 seconds

Outside Dimensions

D – Overall Width:
154″ (3,912 mm)
E – Outside Length:
257″ (6,528 mm)
F – Overall Length:
297″ (7,544 mm)
G – Height of Columns:
93″ (2,362 mm)

Inside Dimensions

H – Width Between Columns:
134″ (3,404 mm)
I – Drive-Thru Clearance:
109″ (2,769 mm)

Runways

J – Runway Width:
22″ (559 mm)
K – Length of Runways:
249″ (6,325 mm)
L – Width Between Runways:
38″ (965 mm) or 56″ (1,422 mm)
M – Runway Centerline:
60″ (1,524 mm) or 78″ (1,981 mm)
N – Outside Edge of Runways:
82″ (2,083 mm) or 100″ (2,540 mm)

Minimum Wheelbase

Rated Capacity:
185″ (4,699 mm)
75% Capacity:
160″ (4,064 mm)
50% Capacity:
135″ (3,429 mm)
25% Capacity:
110″ (2,794 mm)

Locking

Locking Positions:
9
Lock Spacing:
Every 6″ / 152 mm

Power Unit

Motor:
220 VAC / 60 Hz. 1Ph.
Noise:
45 dB

Shipping

Weight:
6,109-lbs. (2,770 kg)
Dimensions:
266” x 27” x 35” (6,756 mm x 685 mm x 889 mm)

BendPak HDS-27 Photos

BendPak HDS-27 four post liftBendPak HDS-27 four post lift view 2BendPak HDS-27 four post lift view 3BendPak HDS-27 four post lift view 4

BendPak HDS-27 at a Glance

  • The BendPak HDS-27 is built for daily professional use.
  • The BendPak HDS-27 is backed by manufacturer support and documentation.
  • Our team can confirm shipping options for the BendPak HDS-27 to your location.
  • The BendPak HDS-27 is a smart fit for shops upgrading their equipment.
  • Every BendPak HDS-27 order includes help from our product specialists.

Key Highlights of the BendPak HDS-27

Here is a quick summary of what stands out on this four post lift:

  • Substantial 12″ x 12″ base plates support the massive columns.
  • 27,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Supersized 12″ diameter cable sheaves
  • Galvanized lifting cables

Why Shops Choose the BendPak HDS-27

c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`

Benefits of a Quality Four Post Lift

Investing in the right four post lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the BendPak HDS-27

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the BendPak HDS-27

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the BendPak HDS-27 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right four post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak HDS-27 FAQs

Do I need special concrete for the BendPak HDS-27?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak HDS-27 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the four post lift correctly, which protects your investment and your technicians.

How is the BendPak HDS-27 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak HDS-27 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak HDS-27 27,000-lb. Capacity ALI Certified Standard Length Four-Post Truck Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery