BendPak HDS-14 14,000-lb. Capacity ALI Certified Standard Length Car Lift

$9,195.00

HDS-14 Four-Post Car Lift: No Such Thing as Overboard BendPak’s HDS-14 four-post lift is engineered to meet the strenuous demands of your toughest professional lifting applications. Incorporated into every lift is a laundry list of key features as long as your arm, ensuring BendPak lifts remain the

SKU: IRG0135 Categories: ,
Description

The BendPak HDS-14 is a professional-grade four post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the BendPak HDS-14, along with setup tips, maintenance advice and answers to common questions.

BendPak HDS-14 Features and Specifications

Extended runways

14,000-lb. vehicles have wheelbases that need specialized equipment to keep them safe and supported. Our extended runways prevent wear and tear on your vehicle. Driving onto the runway is safe and simple for vehicles of all sizes.

Dual-hub cable sheaves

Dual-hub cable sheaves reduce stress, fatigue and wear. Huge 10.5” diameter cable sheaves within the runway and cross tubes combine with massive 2.25” diameter sheave axles. This dramatically improves cable wear and critical component lifespan, which means less money in service-related expenses down the road.

Heavy-duty aircraft cable

This lift features four, 1/2” diameter, 6 x 25 stainless-steel lifting cables that have a breaking strength of over 14,000 lbs. each. This aircraft-quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue.

Built-in lubrication

Grease fittings are located on every sheave and sheave axle to help keep these critical parts well-lubricated and simplify periodic maintenance.

Flow restrictor

An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.

Large base plates

10″ x 12″ base plates provide a solid foundation for every 14K capacity four-post lift.

Spring-loaded safety locks

Safety locks automatically engage continuously during rise, and adjustable safety ladders allow for precise runway leveling, even when installed on sloped floors. This is a crucial feature because even small slopes can impact the safe-keeping of your garage or service bay.

Push-button pneumatic lock release

A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service.

Secondary lock system

A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event your four-post lift experiences an unexpected cable failure.

Integrated design

Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the structure. That doesn’t mean they’re hard to find: you’re always able to look in and perform a visual inspection during operation.

Adjustable height locking positions

Each column features multiple height locking positions for variable-height parking and infinite leveling.

Electric-hydraulic power system

A maintenance-free electric hydraulic power system assures ultimate dependability. All operator controls are conveniently located within easy reach. Raising and lowering the arms should be as easy as pushing a button—and it is!

Non-skid runways

Non-skid runways provide maximum grip, even when the runway surface is wet or oily.

Longer approach ramps

These approach ramps were designed a little longer to help when loading low ground-clearance vehicles. It’s the little bit that makes a big difference.

Flexible protective conduit

Hydraulic hoses and airlines, if not properly managed, can be a legal and functional nightmare. ALI inspectors routinely write citations and refuse to pass inspected lifts because of visible damage to cables. We route all our cables through flexible, non-metallic tubing that protects against electrical shocks from worn cables, as well as general wear that occurs from heavy use over time.

Rolling bridge jacks

Optional 7,000-lb. capacity rolling jacks (model RBJ7000) make a great addition. RBJ7000 bridge jacks are used to raise the front or rear portion of a vehicle off the runways, allowing operators to perform efficient wheel and brake service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms with frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Telescoping rail supports accommodate adjustable runways for different tread widths.

Each jack features three safety-lock positions, as well as stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10 – 20 CFM.

Choose extended length

A longer lift is useful for vehicles like limos, SUVs and trucks, and that’s where the HDS-14X extended 4-post lift comes in handy. We call it our “limo style” lift because of how much front-to-back clearance it offers, so you can make it over or under the lift with ease. This lift adds additional versatility and craftsmanship to your garage.

Choose open-front design

We engineered the HDSO14P open-front ​4-post lift without a front cross bar, so operators can easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. This specialty car lift is a must for busy service bays.

Features & Specs

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Mid to long-style approach ramps for low ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2″ aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Oversized sheave diameter reduces cable fatigue
  • Oversized self-lubricating cable rollers
  • Rugged 1.75″ roller axles
  • Multi-position safety locks in each column
  • Customizable power unit location
  • Approach ramps incorporate built-in rear-wheel chocks
  • Independent backup slack-cable safety latches
  • Runways feature non-skid surface
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
  • ETL approved

Capacity

Lifting Capacity*
14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle
7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle
7,000 lbs. (3,175 kg)

Rise

A – Min. Runway Height:
7.625″ (194 mm)
B – Max. Rise:
70″ (1,778 mm)
C – Max. Lifting Height:
77.625″ (1,972 mm)
Time to Full Rise:
60 seconds

Outside Dimensions

D – Overall Width:
130″ (3,302 mm)
E – Outside Length:
213″ (5,410 mm)
F – Overall Length:
241″ (6,121 mm)
G – Height of Columns:
93″ (2,362 mm)

Inside Dimensions

H – Width Between Columns:
120″ (3,048 mm)
I – Drive-Thru Clearance:
98″ (2,489 mm)

Runways

J – Runway Width:
20″ (508 mm)
K – Length of Runways:
199″ (5,055 mm)
L – Width Between Runways:
37.5″ (953 mm) or 51″ (1,295 mm)
M – Runway Centerline:
57.5″ (1,461 mm) or 71″ (1,803 mm)
N – Outside Edge of Runways:
77.5″ (1,969 mm) or 91″ (2,311 mm)

Minimum Wheelbase

Rated Capacity:
140″ (3,556 mm)
75% Capacity:
120″ (3,048 mm)
50% Capacity:
100″ (2,540 mm)
25% Capacity:
80″ (2,032 mm)

Locking

Locking Positions:
13
Lock Spacing:
Every 4″ (102 mm)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Shipping

Weight:
2,605-lbs. (1181.6 kg)
Dimensions:
211″ x 24″ x 32″ (5359 mm x 610 mm x 813 mm)

BendPak HDS-14 Photos

BendPak HDS-14 four post liftBendPak HDS-14 four post lift view 2BendPak HDS-14 four post lift view 3BendPak HDS-14 four post lift view 4

BendPak HDS-14 at a Glance

  • The BendPak HDS-14 is built for daily professional use.
  • The BendPak HDS-14 is backed by manufacturer support and documentation.
  • Our team can confirm shipping options for the BendPak HDS-14 to your location.
  • The BendPak HDS-14 is a smart fit for shops upgrading their equipment.
  • Every BendPak HDS-14 order includes help from our product specialists.
  • The BendPak HDS-14 combines solid construction with simple operation.

Key Highlights of the BendPak HDS-14

Here is a quick summary of what stands out on this four post lift:

  • 10″ x 12″ base plates provide a solid foundation for every 14K capacity four-post lift.
  • Each column features multiple height locking positions for variable-height parking and infinite leveling.
  • Non-skid runways provide maximum grip, even when the runway surface is wet or oily.
  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493

Why Shops Choose the BendPak HDS-14

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Four Post Lift

Reliable equipment is one of the best investments a shop can make. A dependable four post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.

Common Uses for the BendPak HDS-14

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the BendPak HDS-14

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the BendPak HDS-14 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right four post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak HDS-14 FAQs

Do I need special concrete for the BendPak HDS-14?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak HDS-14 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the four post lift correctly, which protects your investment and your technicians.

How is the BendPak HDS-14 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak HDS-14 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak HDS-14 14,000-lb. Capacity ALI Certified Standard Length Car Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery