Bendpak 12APX 12,000-lb Capacity ALI Certified / Clearfloor / Screw Pads / High-Rise

$12,795.00

The BendPak 12APX The BendPak 12APX has been designed to accommodate mechanics out there that are constantly in uncomfortable positions while on the job. This beast of a lift offers an overall height of 169”. This will give you plenty of room to work comfortably with the best equipment available. Mu

SKU: IRG0084 Categories: ,
Description

Looking for a reliable two post lift? The Bendpak 12APX delivers the durability, safety and ease of use that busy service bays demand. This page covers the Bendpak 12APX features, specifications, installation planning and care so you can buy with confidence.

Bendpak 12APX Features and Specifications

Specifications

  • 12K LBS. Lifting Capacity
  • Bi-Metric™ Lifting
  • Low-Pro™ Triple-Telescoping Arms
  • Performance Guaranteed
  • Adaptable Design: Symmetric or Asymmetric
  • Automatic Swing Arm Restraint System (ASARS)
  • Durable Powder Coat Finish
  • Expandable Top Beam
  • Double-Telescoping Screw Pads
  • Padded Overhead Safety Shutoff Bar
  • Exclusive Bi-Metric™ Arm Design
  • Single-Point Safety Release
  • Drop-End Arms
  • Dual Hydraulic Direct-Drive Cylinders
  • Electric/Hydraulic HVLP Power System
  • Self-Lubricating Dura-Glide UHMW Polyethylene Bearing System
  • Safety Locks in Each Column
  • Heavy-Duty Aircraft-Quality Equalizer Cables
  • Oversized Cable Sheave Diameter
  • Four-Triple Telescoping Arms

Accessories Included:

  • 2.5″ Medium Adapters (Set of 4)
  • 5″ Tall Adapters (Set of 4)
  • Adapter Holders (Set of 2)
  • Drop-In Cradle Pads (Set of 4)

Optional Accessories:

  • Quick-Fit Pinch-Weld Pucks (Set of 4)
  • Quick-Fit Pinch-Weld Pads (Set of 4)
  • Wide Frame Cradle Adapters (Set of 2)
  • 2″ Low Adapter (Set of 4)
  • Steel Lift Pads (Set of 4)
  • Replacement Urethane Pads (Set of 4)
  • Screw Pads (Set of 4)

Model 12APX

Max. Lifting capacity: 12,000 lbs. / 5,443 kg
A – Max. Rise: 75.75 in. / 1,922 mm
B – Lifting Height w/Pad down: 78.50 in. / 1,992.3 mm
C – Max. Lifting Height w/ Pad up: 82.5 in. / 2,095 mm
D – Min. Height w/ Pad: 4 in. / 101.2 mm
E – Overall Height: 169 in. / 4,294 mm (12APX)
F – Overall Width: 156 in. / 3,959 mm
G – Width, Outside Posts: 143 in. / 3,238 mm
H – Width, Inside Posts: 120 in. / 3,047 mm
I – Width, Drive-Thru: 103 in. / 2,616 mm
J – Floor to Top Switch: 162.50 in. / 4,128.1 mm (12APX)
K – Front Arm Reach (min): 26 in. / 660.4 mm (min) (12APX)
L – Rear Arm Reach: 29.50 in. / 745.3 mm (min) (12APX)
Max. load per Lift Arm: 3,000 lbs. / 1,361 kg
Pad Adapters Total Height: 7.50 in. / 188 mm
Time to Full Rise: ≈ 45 seconds
Motor: 220 VAC, 60 Hz, 1 Phase
Sound: <70 dB

 

Bendpak 12APX Photos

Bendpak 12APX two post liftBendpak 12APX two post lift view 2Bendpak 12APX two post lift view 3Bendpak 12APX two post lift view 4

Key Highlights of the Bendpak 12APX

Here is a quick summary of what stands out on this two post lift:

  • 12K LBS. Lifting Capacity
  • Bi-Metric™ Lifting
  • Low-Pro™ Triple-Telescoping Arms
  • Performance Guaranteed
  • Adaptable Design: Symmetric or Asymmetric

Why Shops Choose the Bendpak 12APX

c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`

Benefits of a Quality Two Post Lift

The best two post lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.

Common Uses for the Bendpak 12APX

c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`

Installation and Setup

c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`

Safety and Maintenance Tips for the Bendpak 12APX

c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`

Buy the Bendpak 12APX from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

Bendpak 12APX FAQs

Do I need special concrete for the Bendpak 12APX?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Bendpak 12APX or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the Bendpak 12APX shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Bendpak 12APX come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Two Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Bendpak 12APX is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bendpak 12APX 12,000-lb Capacity ALI Certified / Clearfloor / Screw Pads / High-Rise”

Your email address will not be published. Required fields are marked *

Shipping & Delivery