Bendpak 10APX-181 PRO Series 10,000‐lb. Capacity ALI Certified 2-Post Lift Package

$8,570.00

10AP SERIES: TALL-RISE LIFTS Our 10APX has been designed to accommodate mechanics out there that are constantly in uncomfortable positions while on the job. This beast of a lift offers a lifting height of 79.5” and an overhead beam of 157”. This will give you plenty of room to work comfortably with

SKU: IRG0070 Categories: ,
Description

The Bendpak 10APX-181 Two Post Lift brings proven design and solid construction to your shop. Read on for detailed specifications of the Bendpak 10APX-181 Two Post Lift, practical setup guidance and the answers to questions our customers ask most often.

Bendpak 10APX-181 Two Post Lift Features and Specifications

  • Durable powder coat finish
  • Expandable top beam accommodates wide or narrow drive-thru configurations
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Exclusive Bi-Metric™ arm design for more versatile arm positioning
  • Single-point safety release
  • Drop-end arms provide a lower pad heigh
  • Dual hydraulic direct-drive cylinders
  • Oversized 53″ & 59″ tall carriages for superior strength and durability
  • Electric / hydraulic HVLP power system
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3″
  • Automatic arm restraints withstand over 2000-pounds of side force
  • Heavy-duty 1/2″ aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 14-piece standard adapter set
  • Four triple-telescoping arms
  • ALI certified

Capacity

Lifting Capacity*: 10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle: 5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle: 5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle: 5,000 lbs. (2,268 kg)

Rise

A – Rise: 75.5″ (1,918 mm)
B – Rise + Pad Only: 79.5″ (2,019 mm)
C – Rise + Pad + 63 mm Adapter: 89″ (2,261 mm)
D – Min. Height + Pad: 4″ (102 mm)
Time to Full Rise: ≈45 seconds

Outside Dimensions

E – Height Overall: 181″ (4,597 mm)
F – Width Overall: 135″ (3,429 mm) or 145″ (3,683 mm)
G – Outside Columns: 127.5″ (3,239 mm) or 137.5″ (3,493 mm)

Inside Dimensions

H – Inside Columns: 108.5″ (2,756 mm) or 118.5″ (3,010 mm)
I – Drive-Thru Clearance: 92″ (2,337 mm) or 102″ (2,591 mm)

Arms & Pads

K – Front Arm Reach: (MIN) 24.5″ (622 mm)
K – Front Arm Reach: (MAX) 50″ (1,270 mm)
L – Rear Arm Reach: (MIN) 32″ (813 mm)
L – Rear Arm Reach: (MAX) 59.25″ (1,505 mm)
Screw Pad Adjustment: 2″ (51 mm)
Max Load Per Arm 2,500 lbs. (1,134 kg)

Power Unit

Motor: 220 VAC, 60 Hz, 1 Phase
Noise: <70 dB

Bendpak 10APX-181 Two Post Lift Photos

Bendpak 10APX-181 Two Post Lift two post liftBendpak 10APX-181 Two Post Lift two post lift view 2Bendpak 10APX-181 Two Post Lift two post lift view 3Bendpak 10APX-181 Two Post Lift two post lift view 4

Key Highlights of the Bendpak 10APX-181 Two Post Lift

Here is a quick summary of what stands out on this two post lift:

  • Durable powder coat finish
  • Expandable top beam accommodates wide or narrow drive-thru configurations
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Exclusive Bi-Metric™ arm design for more versatile arm positioning

Why Shops Choose the Bendpak 10APX-181 Two Post Lift

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Two Post Lift

Reliable equipment is one of the best investments a shop can make. A dependable two post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.

Common Uses for the Bendpak 10APX-181 Two Post Lift

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the Bendpak 10APX-181 Two Post Lift

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the Bendpak 10APX-181 Two Post Lift from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

Bendpak 10APX-181 Two Post Lift FAQs

Do I need special concrete for the Bendpak 10APX-181 Two Post Lift?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Bendpak 10APX-181 Two Post Lift or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the Bendpak 10APX-181 Two Post Lift shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Bendpak 10APX-181 Two Post Lift come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Two Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Bendpak 10APX-181 Two Post Lift is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bendpak 10APX-181 PRO Series 10,000‐lb. Capacity ALI Certified 2-Post Lift Package”

Your email address will not be published. Required fields are marked *

Shipping & Delivery