Bendpak 10AP-SRT 10,000‐lb. Capacity ALI Certified / Adaptable Clearfloor / Adjustable Width / Screw Pads / SHORT-RISE
$6,595.00
The Ultimate Lift Solution for Tire Pros At BendPak, we understand that different jobs require different tools. You’re not always going to need a standard lift you can stand under a vehicle, and that’s where the 10AP-SRT comes in. This short-rise, short-column lift is capable of safely handling up t
The Bendpak 10AP-SRT is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the Bendpak 10AP-SRT, along with setup tips, maintenance advice and answers to common questions.
Bendpak 10AP-SRT Features and Specifications
Specifications
- Power Side Post – The power side post holds the power unit, the safety lock release handle, and the lowering handle (which is on the power unit).
- Offside Post – The opposite Post.
- Power Unit – Provides hydraulic fluid pressure to the lift and connects to an appropriate power source. Includes the Up button, the lowering handle, and the hydraulic fluid reservoir.
- Safety Lock Release Handle – Located on the power post above the power unit, it disengages the safety locks so you can lower the lift.
- Safety Covers – Cover the safety lock mechanism on the posts.
- Floor Plates – Cover the hydraulic hoses, equalizing cables, and safety cable routed between each post.
- Lift Heads – Sometimes called carriages. Lift heads move up and down in the posts. They connect to the lift arms, so when the lift heads rise, so do the lift arms.
- Lift Arms – Extendable steel arms that attach to the lift heads.
- Adapters – Pads that contact the lifting points on the underside of the vehicles you raise. Four cradle adapters are included with your lift and are well-suited for raising trucks and SUVs (body-on-frame style). Additional adapters are available separately and include height adapters, pinch weld pads and screw adapters.
- Height Adapter Trays – Attach to the bottom of the posts, used for holding the spare adapters when not in use.
- Safety Locks – Hold the lift heads up when engaged. Multiple safety lock heights let you select the best one for your needs. Once engaged on its safety locks, the lift heads stay up, even if the lift loses power. Only leave your lift fully lowered or engaged on safety locks.
- Durable powder coat finish
- Expandable top beam accommodates wide or narrow drive-through configurations
- Double-telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Exclusive Bi-Metric™ arm design for more versatile arm positioning
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53” & 59” tall carriages for superior strength and durability
- Electric / hydraulic HVLP power system
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3”
- Automatic arm restraints withstand over 2000-pounds of side force
- Heavy-duty ½” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Four triple-telescoping arms
- ALI certified
Capacity
Dimensions
Arms & Pads
Safety
Power Unit
Bendpak 10AP-SRT Photos




Key Highlights of the Bendpak 10AP-SRT
Here is a quick summary of what stands out on this two post lift:
- Offside Post – The opposite Post.
- Safety Covers – Cover the safety lock mechanism on the posts.
- Floor Plates – Cover the hydraulic hoses, equalizing cables, and safety cable routed between each post.
- Lift Arms – Extendable steel arms that attach to the lift heads.
- Height Adapter Trays – Attach to the bottom of the posts, used for holding the spare adapters when not in use.
Why Shops Choose the Bendpak 10AP-SRT
c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`
Benefits of a Quality Two Post Lift
Reliable equipment is one of the best investments a shop can make. A dependable two post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.
Common Uses for the Bendpak 10AP-SRT
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the Bendpak 10AP-SRT
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the Bendpak 10AP-SRT from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the official BendPak website.
Bendpak 10AP-SRT FAQs
Do I need special concrete for the Bendpak 10AP-SRT?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Bendpak 10AP-SRT or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.
How is the Bendpak 10AP-SRT shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Bendpak 10AP-SRT come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
Atlas 6MR Portable Mid-Rise 6000 lb Capacity Scissor Lift
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
BendPak MD-6XP Car Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift We’re not just talking a big game; we’re offering the first open-center mid-rise lift ever made. Decades of experience have taught us a thing or two about vehicle lift points. A car lift with longer platforms means you get to lift more vehicle t
BendPak MDS-6LP Car Lift
BendPak MDS-6LP Car Lift The MDS-6LP sports an open-center design which makes it one of the best options in terms of convenience and work productivity. This lift can handle vehicles weighing up to 6,000 lbs. BendPak has crafted this lift for home garages, full-service shops, quick-lube pits, and rea

Reviews
There are no reviews yet.