Dannmar D2-10C Symmetric 10,000 lb. capacity ALI certified Two-Post Lift

$5,134.00

Dannmar’s D2-10C symmetric two-post lift uses an adjustable top beam for wide or narrow installation setups. This feature allows choosing the best setting for your shop’s floor space. The design requires very little maintenance. The D2-10C two-post lift features low-pressure HVLP direct-drive cylind

SKU: IRG0033 Categories: ,
Description

The Dannmar D2-10C brings proven design and solid construction to your shop. Read on for detailed specifications of the Dannmar D2-10C, practical setup guidance and the answers to questions our customers ask most often.

Dannmar D2-10C Features and Specifications

Features

  • Electric / hydraulic power system
  • Large, 17″ x 19″ A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearings
  • Safety locks in each column spaced every 3”
  • Automatic arm restraints
  • Heavy-duty 1/2″ aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4-piece 63 mm stackable adapter set comes standard
  • Padded overhead safety shutoff bar
  • Telescoping arm design for more versatile arm positioning
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53″ tall carriage for superior strength
  • Triple-telescoping arm design
  • Versatile drop-in contact pads with stackable adapters.
  • ETL Approved

Specs

Style Symmetric
SKU# 5175313
Lifting Capacity 10,000 lbs. (4,536 kg)
A – Lowered Height + Pad 5″ (127 mm)
B – Max. Lift Height (Top Lock) 78.5″ (1,994 mm)
C – Max. Rise 69″ (1,753 mm)
D – Height Overall 145″ (3,683 mm)
E – Width Overall 145.25″ (3,690 mm)
F – Width Outside Columns 137.25″ (3,486 mm)
G – Width Inside Columns 118.25″ (3,004 mm)
H – Drive-Thru Clearance 106″ (2,692 mm)
I – Floor to Top Switch 141″ (3,581 mm)
J – Arm Reach 32.25″ (819 mm) – 52.5” (1,334 mm)
Max. Load per Arm 2,500 lbs. (1,134 kg)
Time to Full Rise 45 seconds
Noise 45 dB
Motor 220 VAC / 60 Hz / 1 Ph

Dannmar D2-10C Photos

Dannmar D2-10C two post liftDannmar D2-10C two post lift view 2Dannmar D2-10C two post lift view 3Dannmar D2-10C two post lift view 4

Key Highlights of the Dannmar D2-10C

Here is a quick summary of what stands out on this two post lift:

  • Electric / hydraulic power system
  • Large, 17″ x 19″ A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearings
  • Safety locks in each column spaced every 3”
  • Automatic arm restraints

Why Shops Choose the Dannmar D2-10C

c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`

Benefits of a Quality Two Post Lift

Investing in the right two post lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the Dannmar D2-10C

c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`

Installation and Setup

c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`

Safety and Maintenance Tips for the Dannmar D2-10C

c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`

Buy the Dannmar D2-10C from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Dannmar website.

Dannmar D2-10C FAQs

Do I need special concrete for the Dannmar D2-10C?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Dannmar D2-10C or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the Dannmar D2-10C shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Dannmar D2-10C come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Two Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Dannmar D2-10C is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Getting the Most from Your Two Post Lift

A few simple habits make a big difference in how long equipment lasts. Keep the work area clean, store accessories where technicians can find them, and log maintenance so nothing gets missed. Shops that treat their two post lift as a long-term investment see better uptime and lower operating costs year after year.

Training matters too. Walk every new team member through safe operation of the Dannmar D2-10C, review the manual together, and post key safety reminders near the equipment. A short refresher every few months keeps good habits in place.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Dannmar D2-10C Symmetric 10,000 lb. capacity ALI certified Two-Post Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery