Tuxedo TP9KSCX 9,000 lb 2 Post Symmetric Clear Floor Car Lift
$2,750.00
The Tuxedo TP9KSCX is a 9,000 lb symmetric clear floor two post lift with chain drive, dual point lock release, 96″ drive-thru clearance, and equal-length 31″–45″ arms for centered vehicle loading.
The Tuxedo TP9KSCX is a 9,000 lb symmetric, clear floor two post lift that centers the vehicle between the columns for balanced lifting of cars, SUVs, vans, and light trucks. Equal-length arms, a 96″ drive-thru clearance, and an open floor make it a versatile choice for repair shops and home garages.
Tuxedo TP9KSCX Overview
The Tuxedo TP9KSCX uses chain drive cylinders and single piece columns with a durable powder coat finish. Its clear floor design runs the hydraulic and equalization lines overhead, leaving the floor between the columns completely open for jacks, transmission stands, and creepers.
A front-side mounted power unit keeps overall width down, and internal hose routing with integrated hose guards protects the hydraulic lines. Rubber door guards help prevent door dings during loading.
Why a Symmetric 2 Post Lift?
On a symmetric two post lift, the columns face each other directly and all four arms are the same length. The vehicle is centered between the columns, which places the load evenly across both sides.
Symmetric lifts are a strong fit for longer-wheelbase vehicles such as pickups and vans, where an even front-to-rear weight split matters more than extra door clearance.
Key Features of the Tuxedo TP9KSCX
- 9,000 lbs. lifting capacity
- Symmetric / clear floor design
- Chain drive cylinders
- Dual point lock release
- Saddle pad adapters included (1 pair)
- Single piece column construction with powder coat finish
- Padded shut-off bar with kill switch
- Low profile drop-in swivel pads with 1-1/2″ adjustable height
- Four each stackable 1-3/8″ and 4″ drop-in height adapters
- Reduced overall width with front-side mounted power unit
- Internal hose routing with integrated hose guards
- Rubber door guards
Tuxedo TP9KSCX Specifications
| Model | Tuxedo TP9KSCX |
| Lifting capacity | 9,000 lbs |
| Lift type | 2 post, symmetric, clear floor |
| Max rise (under arms) | Approx. 68″ |
| Min pad height | 4″ |
| Overall height | 142-7/8″ |
| Overall width (with power unit) | 138″ |
| Width between columns | 113-5/8″ |
| Drive-thru clearance | 96″ |
| Arm reach (front and rear) | 31″ – 45″ |
| Lifting time | Approx. 50 seconds |
| Power | 220V, 20 amp, single phase |
Important: not for use with diesel trucks (3/4 ton diesel or larger). For those vehicles we recommend a 10,000 or 11,000 lb two post lift. Specifications may change; confirm with our team before installation.
Before You Buy: Installation Checklist
A two post lift is only as safe as the floor and space it is installed in. Before ordering, check these points against the manufacturer’s installation manual:
- Ceiling height: make sure your ceiling clears the lift’s overall column height plus the height of the tallest vehicle you plan to raise
- Concrete: confirm your slab meets the minimum thickness and strength required for anchoring
- Bay width: allow room for the overall lift width plus space to open doors and move around the columns
- Power: the Tuxedo TP9KSCX requires a 220V, 20 amp, single-phase circuit installed by a licensed electrician
Professional installation by a qualified lift installer is recommended. For lift safety standards and certified product listings, visit the Automotive Lift Institute (ALI).
Who Is the Tuxedo TP9KSCX For?
- Repair shops servicing pickups, vans, and SUVs
- Fleet maintenance bays
- Home garages with adequate ceiling height
- Owners who want balanced, centered lifting
Tuxedo TP9KSCX FAQ
What ceiling height does the Tuxedo TP9KSCX need?
The columns are about 142-7/8″ tall overall. Add clearance for the roof height of any vehicle you raise to full height.
Can it lift a 3/4 ton diesel truck?
No. Choose a 10,000 or 11,000 lb two post lift for 3/4 ton and larger diesel trucks.
Symmetric or asymmetric: which should I buy?
Choose symmetric for longer trucks and vans and even weight distribution. Choose asymmetric if front door clearance on cars is your priority.
Shop More Car Lifts
Compare more two post lifts, or explore four post lifts, scissor lifts, and lift combo packages in our full car lifts collection. Have questions about the Tuxedo TP9KSCX, installation, or freight delivery? Contact Ironside Garage and our team will help you choose the right lift.
Related products
BendPak LR-10000 10000 lb Capacity Low-Rise Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety
BendPak MD-6XP Car Lift
BendPak MDS-6EXT Car Lift
BendPak MDS-6LPF Car Lift
Forward Lift 6000MRL 6000 lbs Capacity Mid-Rise Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.