BL-3500SLX
$1,925.00
QuickJack’s BL-3500SLX is a great choice for small-wheelbase vehicles. It can handle up to 3,500 lbs. and is the lightest model QuickJack offers. Its frames are easy to transport in and out of the garage or wherever else you want to get work done. With the BL-3500SLX you’ll be able to have fun wrenc
The BL-3500SLX is QuickJack’s lightest portable car lift, built to raise vehicles up to 3,500 lbs. about 21 inches off the ground in under 30 seconds. Below you’ll find a complete guide to how the BL-3500SLX works, who it suits, and how to get the most from it in your garage or at the track.
This is one of the smartest home car lifts ever made. QuickJack’s BL-3500SLX portable car lift system is a game-changer. With it you won’t have to deal with unsafe ramps ever again, as well as flimsy jacks and untrustworthy stands. The BL-3500SLX will be able to get your vehicle about 21” in the air in less than 30 seconds.
This portable lift has a weight capacity of 3,500 lbs., and it is the smallest and lightest frame assembly in QuickJack’s lineup. Its most impressive feature however is the fact that it can go virtually anywhere. This QuickJack is so lightweight that you can fit it in an average car trunk or backseat. After the initial one-time assembly, all you have to do is hook up the power. Once the frames and rubber blocks are in place under your vehicle’s lift points, you can have your QuickJack up and running in no time. It can’t be easier.
This QuickJack sports a super-low 3” profile which lets it fit where no other car lift could. Since there aren’t any cross members involved, you can easily tailor the platform spacing to fit nearly any vehicle weighing 3,500 lbs. and under. The lightweight nature makes this portable car lift the perfect tool for the track. There are many satisfied racers and enthusiasts who have enjoyed QuickJack for quick wheel service or tune-ups away from home.
There is also an optional DC power unit which connects the car lift to your car battery or portable battery pack. With the QuickJack BL-3500SLX you can easily convert your garage lift to a portable car lift just by rolling it to the trunk of your car and hauling it to the track. Its 12V DC power option makes this the world’s first-ever true track lift. You won’t need to have a professional pit crew when you have a QuickJack at your side.
Features
Perfect for the track
Convert your garage lift to a portable car lift just by rolling it to the trunk of your car and hauling it to the track. 12V DC power option makes this the world’s first-ever true track lift. If you don’t have a professional pit crew at your disposal, you’ll want QuickJack by your side.
Have a heavier vehicle? The BL-5000SLX is also great for track day.
Extended block trays
QuickJack has increased the size of their rubber block trays to improve access to varied lift points. Position blocks from 26.75” – 50.5” apart, satisfying most lift point spreads.
Zero-leak fittings
QuickJack’s car lift components include flush-face hose fittings to make sure the fluids stay in the unit and not on your garage floor. You don’t want to be the guy who starts leaking all over the track, either.
Open-center design
Inspired by larger frame-engaging car lifts, QuickJack’s open-center design gives users total access to the wheels and undercarriage.
Specs

Lifting Capacity
| Capacity | 3,500 lbs. (1,588 kg) |
|---|
Lowered Height
| A – Frame only: | 3″ (76 mm) |
|---|---|
| B – With 2″ block: | 3.5″ (89 mm) |
Lifting Height
| C – Frame only: | 16.5″ (419 mm) |
|---|---|
| D – With 2″ block: | 17.5″ (445 mm) |
| E – With 3″ block: | 18.5″ (470 mm) |
| F – Max. height: | 21″ (533 mm) |
| G – With adapters: | Not compatible |
| H – With adapters + pin: | Not compatible |
Lift Point Spread
| I – Maximum: | 50.5″ (1,283 mm) |
|---|---|
| J – Minimum: | 27″ (686 mm) |
Frame dimensions (ea.)
| K – Width: | 10.5″ (267 mm) |
|---|---|
| L – Length: | 62.5″ (1,588 mm) |
| A – Height: | 3″ (76 mm) |
| Weight: | 60 lbs. (27 kg) |
Other Spec
| Time to full rise: | 30 seconds |
|---|---|
| Power unit weight: | 30 lbs. (13 kg) |
| Shipping weight (per frame): | 64 lbs. (29 kg) |
Why the BL-3500SLX Is a Smart Choice for Home Mechanics
Most home mechanics start with a floor jack and a set of stands. That setup works, but it is slow, it takes up floor space around the car, and every lift point has to be jacked one corner at a time. The BL-3500SLX replaces that routine with two low-profile frames that raise the whole side of the car at once.
Because there are no cross members joining the two frames, the space under the middle of the car stays open. You can roll a creeper under the engine, drop an exhaust, or reach the transmission without crawling around a jack handle.
When the job is done, the frames come out from under the car and stand against a wall. Your garage goes back to being a garage, which is something a two-post or four-post lift can never offer.

Key Specifications of the BL-3500SLX
Here are the main numbers that define the BL-3500SLX, taken from the manufacturer’s specification sheet:
- Lifting capacity: 3,500 lbs.
- Lifted height: about 21 inches
- Time to full rise: about 30 seconds
- Lowered frame height: 3 inches
- Frame length: 62.5 inches; frame width: 10.5 inches
- Frame weight: 60 lbs. each
- Lift point spread: 27 inches minimum to 50.5 inches maximum
- Power unit weight: 30 lbs.
Those figures explain why the BL-3500SLX is often called a true track lift. Each frame weighs about as much as a full set of race wheels, and the whole kit fits in the trunk or back seat of an average car.
Built for the Track and the Paddock
Racers and autocross drivers need to change wheels, check brakes, and adjust suspension between sessions. The BL-3500SLX is sized for exactly that work. With the optional 12V DC power unit, it can run from your car battery or a portable battery pack, so you don’t need a wall outlet in the paddock.
Set the frames beside the car, slide them under the lift points, place the rubber blocks, and press the button. In about half a minute the car is in the air and all four wheels are free. That speed adds up over a race weekend when every minute between sessions counts.
When you pack up, the BL-3500SLX rolls back into the trunk. There is no trailer to tow and no heavy hardware to carry back to the pits.
Low 3-Inch Profile for Lowered Cars
Lowered sports cars and track cars can be hard to lift. Many floor jacks can’t fit under them without ramps. The BL-3500SLX frames sit only 3 inches tall, so they slide under many cars that sit close to the ground.
The lift point spread of 27 to 50.5 inches lets you line up the rubber blocks with the factory pinch welds or frame points on a wide range of small and mid-size vehicles. Always check your vehicle’s service manual to confirm the correct lift points before raising it.
Who Should Buy the BL-3500SLX?
The BL-3500SLX is a great fit for:
- Track day drivers who want a fast, portable way to service a car away from home
- Home mechanics with a one-car garage or a low ceiling
- Renters and apartment dwellers who can’t install a permanent lift
- Owners of light sports cars, compact cars, and small sedans under 3,500 lbs.
- Detailers who need quick access to wheels, wheel wells, and lower body panels
If your vehicle weighs more than 3,500 lbs., look at the larger models in our portable car lifts range, which offer higher capacities and longer frames for trucks and SUVs.
How to Set Up the BL-3500SLX
Setup is a one-time job. After the first assembly, using the BL-3500SLX takes only a few steps:
- Park the car on a flat, level, solid surface such as concrete or asphalt.
- Connect the hydraulic hoses and power unit to the frames.
- Slide one frame under each side of the car, between the front and rear wheels.
- Position the rubber lift blocks under the manufacturer’s recommended lift points.
- Raise the car a few inches, check that the blocks are seated, then raise to full height.
- Engage the mechanical safety locks before working under the vehicle.
Lowering is just as simple: raise slightly to release the locks, then lower the car back to the ground and slide the frames out.
Safety Features You Can Trust
Safety is the reason many people move from jack stands to a lift. The BL-3500SLX uses mechanical safety locks so the load does not rest on hydraulic pressure alone while you work. Always lower onto the locks, never work under a car held only by hydraulics, and keep the area around the frames clear of tools and cords.
Read the full operating manual before first use. Check hoses, fittings, and rubber blocks for wear before each lift, and never exceed the 3,500 lb. rated capacity of the BL-3500SLX.
Jobs You Can Do With the BL-3500SLX
With the car raised about 21 inches and the center left open, the BL-3500SLX handles a long list of routine jobs:
- Tire rotations and seasonal wheel swaps
- Brake pad and rotor replacement
- Oil and filter changes
- Suspension checks and alignment prep
- Exhaust and underbody inspections
- Detailing wheel wells and rocker panels
For heavier work such as transmission removal, a full-rise or two-post lift is a better choice. Browse our full car lifts catalog to compare options.
Storage and Transport
One of the best things about the BL-3500SLX is how little space it needs when not in use. Each frame is 62.5 inches long and 10.5 inches wide, so both frames can lean against a wall or hang on wall hooks. The 30 lb. power unit fits on a shelf.
For travel, the frames and power unit fit in the trunk or back seat of most cars. Many owners keep a dedicated bag for the hoses and rubber blocks so the whole BL-3500SLX kit is ready to go.
Care and Maintenance Tips
A little care keeps the BL-3500SLX working for years:
- Wipe down the frames after use, especially after track days with rubber debris or brake dust.
- Inspect hydraulic hoses and couplers for cracks, leaks, or damage.
- Keep the quick-connect couplers clean and capped when disconnected.
- Check the hydraulic fluid level in the power unit as described in the manual.
- Replace worn rubber blocks before they tear or compress unevenly.
BL-3500SLX vs. Floor Jack and Stands
A floor jack and four stands can cost less up front, but the BL-3500SLX offers clear benefits. It lifts the whole side of the car at once instead of one corner. It sets up in about the same time it takes to position a single jack. It keeps the center of the car clear, and it uses safety locks designed for the frame instead of separate stands you have to place by hand.
For anyone who works on their car more than a few times a year, those time savings and the added confidence make the BL-3500SLX easy to justify.
Frequently Asked Questions About the BL-3500SLX
How much can the BL-3500SLX lift?
The BL-3500SLX is rated for vehicles up to 3,500 lbs.
How high does the BL-3500SLX raise a car?
It raises a vehicle about 21 inches off the ground in roughly 30 seconds.
Can the BL-3500SLX run without a wall outlet?
Yes. With the optional 12V DC power unit, it can connect to your car battery or a portable battery pack.
Will the BL-3500SLX fit in my car?
Each frame weighs 60 lbs. and measures 62.5 by 10.5 inches, so the kit fits in the trunk or back seat of an average car.
Is the BL-3500SLX safe to work under?
Yes, when used as directed. Always lower the car onto the mechanical safety locks before working underneath, and follow all manual instructions.
Choosing the Right Workspace for Your BL-3500SLX
Where you use a portable lift matters as much as the lift itself. The BL-3500SLX needs a flat, hard, and level surface. A sealed concrete garage floor is ideal. Smooth asphalt in a paddock or driveway also works well, as long as it is firm and free of cracks or soft spots.
Avoid gravel, grass, dirt, and sloped driveways. Uneven ground can shift the load and make the frames sit unevenly under the car. If you work outdoors in summer, keep in mind that hot asphalt can soften, so check the surface before lifting.
Give yourself room to work. Leave enough space on each side of the car to open doors, roll a creeper, and move a wheel dolly or tool cart. Good lighting also helps, since you will spend more time under the car once lifting becomes this easy.
Planning a Track Day Kit Around the BL-3500SLX
Many drivers build a complete track kit with the BL-3500SLX at its center. A typical kit might include a torque wrench and sockets for lug nuts, a tire pressure gauge, a battery pack for the optional 12V DC power unit, a small tarp to keep frames clean, and a bag for hoses and rubber blocks.
With everything packed in one place, you can arrive at the circuit, unload in a few minutes, and have the car on the lift before the drivers’ meeting ends. Between sessions you can swap wheels, bleed brakes, or check for leaks without waiting for a shared pit jack.
At the end of the day the BL-3500SLX goes back in the trunk alongside your helmet bag. That level of convenience is hard to match with any other lift style.
Accessories That Pair Well With the BL-3500SLX
A few add-ons make daily use even easier. Wall hangers keep the frames off the floor and out of the way. Extra rubber blocks let you match different lift points on different cars. A battery pack gives you full cordless use at the track. Ask our team which accessories are compatible with the BL-3500SLX before you order, since some adapters are not designed for this model.
What Owners Like Most
Owners often point to three things. First, speed: the car goes up in about 30 seconds. Second, size: the frames are light enough to carry and store easily. Third, freedom: you can lift a car at home, at the track, or at a friend’s garage with the same equipment.
For a weekend mechanic or a club racer, those three benefits change how often you are willing to work on your car. Small jobs that used to feel like a chore become quick and simple.
Buying With Confidence
Ironside Garage helps customers across the country choose the right lift for their space, vehicle, and budget. If you are deciding between the BL-3500SLX and a larger portable model, our team can compare capacities, frame lengths, and lift point spreads with you. We are happy to answer questions before and after your purchase so you can start lifting with confidence.
Get Your BL-3500SLX From Ironside Garage
If you want a fast, light, and truly portable lift for home or track, the BL-3500SLX is one of the best tools you can add to your garage. Learn more about the full QuickJack lineup on the official QuickJack website, and contact our team if you have questions about fit, shipping, or accessories.
Related products
Atlas 6MR Portable Mid-Rise 6000 lb Capacity Scissor Lift
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel
BendPak P-9000LTF Car Lift
BendPak SP-7XE Car Lift
BendPak SP-7XE Car Lift The SP-7XE is a space-saving, frame engaging lift from BendPak. This high-quality lift features no cross members at all, meaning installation is easier than ever. This lift can easily accommodate most passenger vehicles as well as light trucks, and it comes loaded with pneuma
Dannmar DLR-6P Car Lift
Dannmar DLR-6P Car Lift The DLR-6P is a high-quality low-rise lift from Dannmar that helps you move along on wheels! Its high-density roller wheels are the secret to how the DLR-6P is such a convenient portable low-rise lift. With a mobile lift you’ll gain the ability to easily relocate your lift wi

Reviews
There are no reviews yet.