Tuxedo MR6.5K-38 6,500 lb Mid-Rise Portable Scissor Lift

$3,793.00

The MR6.5K-38 is a portable 6,500 lb. hydraulic mid-rise scissor frame lift, equipped with twin hydraulic cylinders, pneumatic single point / double lock release system designed to lift cars & light trucks to a comfortable working height of 38”. The lift comes standard with load bearing flip-up runw

SKU: IRG0356 Categories: ,
Description

The Tuxedo MR6.5K-38 is a portable 6,500 lb. mid-rise scissor lift that raises cars and light trucks to a comfortable 38-inch working height. With a 4-inch drive-over height, twin hydraulic cylinders, and a built-in wheel kit and tow bar, the MR6.5K-38 brings shop-level access to garages, detail bays, and tire shops.

  • 6,500 lb lifting capacity
  • Portable lift design with wheel kit & tow bar
  • Portable dolly mounted power unit
  • Low drive over height of 4″
  • Pneumatic single point double lock release system
  • Load bearing flip-up runway extensions
  • Rubber spacer blocks included

Click here for Specifications

MR6.5K-38 Features at a Glance

  • 6,500 lb. lifting capacity
  • 38-inch working height
  • Low 4-inch drive-over height
  • Twin hydraulic cylinders
  • Pneumatic single-point, double-lock release system
  • Load-bearing flip-up runway extensions
  • Flat-top platforms and rubber spacer blocks
  • Wheel kit, tow bar, and dolly-mounted power unit for portability

What Is a Mid-Rise Scissor Lift?

A mid-rise scissor lift sits between a low-rise lift and a full-rise two-post or four-post lift. Instead of raising a car just a couple of feet, it lifts to a height where you can work comfortably on a stool or standing slightly bent. The MR6.5K-38 reaches 38 inches, which is ideal for wheel, tire, and brake work, inspections, and detailing.

Because a scissor lift supports the vehicle from beneath on two platforms, it doesn’t need overhead clearance like a post lift. That makes the MR6.5K-38 a great fit for garages with standard ceiling heights.

Why Choose the MR6.5K-38?

The improved MR6.5K-38 adds 500 lbs. of capacity compared to the earlier version, bringing it to 6,500 lbs. It also features flat-top platforms, which give you a stable, even surface for positioning rubber blocks under a wide range of vehicles. Twin hydraulic cylinders provide strong, steady lifting, and the pneumatic double-lock release makes lowering simple and controlled.

Put together, those upgrades make the MR6.5K-38 a dependable lift for years of trouble-free service.

Low Drive-Over Height

At just 4 inches tall when lowered, the MR6.5K-38 lets many cars drive right over it. Simply drive onto the lift, position the rubber spacer blocks under the vehicle’s lift points, and raise. The flip-up runway extensions are load bearing, so they help you get on and off the lift smoothly.

Truly Portable

Unlike a fixed lift, the MR6.5K-38 comes with a wheel kit and tow bar so you can roll it where you need it. The power unit is mounted on its own dolly, making it easy to move along with the lift. You can use the MR6.5K-38 in one bay today and another bay tomorrow, or push it aside to free up floor space.

MR6.5K-38

Single-Point Lock Release

Safety locks are essential on any lift. The MR6.5K-38 uses a pneumatic single-point, double-lock release system. One control releases the locks so you can lower the vehicle smoothly. It’s simple to use and helps keep the process consistent and safe every time.

Best Uses for the MR6.5K-38

  • Brake pad, rotor, and caliper work
  • Wheel and tire service
  • Seasonal tire changes
  • Vehicle inspections
  • Detailing and paint correction on lower panels
  • Suspension checks and light repairs

Who Should Buy the MR6.5K-38

  • Tire and brake shops that need fast access to wheels
  • Detailing businesses
  • Home garages with standard ceiling heights
  • Dealerships and used car lots for inspections and prep
  • Fleet operators who need a movable lift

Want to compare with other portable options? Browse our portable car lifts category.

How to Use the MR6.5K-38

  1. Roll the lift into position using the wheel kit and tow bar, then remove them as directed.
  2. Place the lift on a flat, level, hard surface.
  3. Drive the vehicle onto the platforms using the flip-up runway extensions.
  4. Set the rubber spacer blocks under the manufacturer’s lift points.
  5. Raise the vehicle slightly and check that each block is secure.
  6. Raise to working height and lower onto the safety locks.
  7. To lower, raise slightly, use the pneumatic release, and lower slowly.

Safety Guidelines

Always lower the MR6.5K-38 onto its mechanical locks before working under or around the vehicle. Never exceed the 6,500 lb. capacity. Keep people clear while lifting and lowering, check that the spacer blocks are correctly positioned, and inspect hoses and fittings regularly. Follow the manufacturer’s operating manual at all times.

MR6.5K-38 front view

Space and Floor Requirements

The MR6.5K-38 should be used on a hard, level concrete floor. Avoid uneven, cracked, or sloped surfaces. Since it’s a scissor lift, it doesn’t need overhead room like a post lift, but make sure you have space to drive on and off and to move around the vehicle. The pneumatic release needs an air supply, so plan your setup near your compressor line.

Maintenance Tips

  • Inspect hydraulic hoses and fittings for leaks or damage.
  • Check the hydraulic fluid level in the power unit.
  • Keep the lock mechanism clean and working freely.
  • Inspect the rubber spacer blocks and replace worn ones.
  • Lubricate pivot points as recommended in the manual.

MR6.5K-38 vs. a Two-Post Lift

A two-post lift raises a vehicle high enough to stand under it, which is great for exhaust and transmission work. But it needs a tall ceiling, thick concrete, and a permanent installation. The MR6.5K-38 takes a different approach. It lifts to 38 inches, needs no overhead clearance, and can be moved whenever you want. For wheel, brake, and inspection work, many shops find a mid-rise lift faster to use, since the vehicle goes up and down quickly and the wheels are right at a comfortable height.

If your work centers on tires, brakes, and detailing, the MR6.5K-38 may be a better match than a two-post lift, and it costs less to set up.

MR6.5K-38 vs. a Low-Rise Lift

Low-rise lifts are compact and handy for wheel work, but they usually raise the vehicle only a couple of feet. The MR6.5K-38 goes higher, reaching 38 inches. That extra height makes a big difference in comfort, especially if you spend hours a day working on wheels and brakes. You can sit on a stool or stand with less bending, which reduces fatigue over a long shift.

MR6.5K-38 vs. Floor Jacks and Stands

Floor jacks and stands are slow when you’re servicing many vehicles. You have to lift each corner, place each stand, and repeat the process in reverse. The MR6.5K-38 lifts the whole vehicle at once in one smooth motion. It’s faster, more stable, and safer, making it ideal for busy shops and serious home garages.

MR6.5K-38 side view

Built for Busy Tire and Brake Shops

Tire and brake shops live and die by speed. The MR6.5K-38 is built to keep bays moving. Drive the car on, set the blocks, lift to 38 inches, and all four wheels are at a comfortable height. Pull the wheels, service the brakes, mount and balance tires, and reinstall. Then lower and drive off. The portable design lets you reposition the lift as your workflow changes, and the flat-top platforms adapt to a wide range of vehicles.

Perfect for Detailing

Detailing the lower half of a vehicle is tough work from the ground. Rocker panels, lower doors, bumpers, and wheel wells are hard to reach when you’re kneeling. The MR6.5K-38 raises the vehicle so those areas sit at a comfortable height. That makes washing, clay bar work, polishing, ceramic coating, and paint protection film installation easier and more precise.

Great for Inspections and Vehicle Prep

Dealerships, used car lots, and inspection stations need to check tires, brakes, suspension, and the underbody quickly. The MR6.5K-38 gives inspectors a clear view without the time and space of a post lift. It’s also handy for vehicle prep before delivery, when tires, brakes, and lower panels need a final check and clean.

Vehicles That Fit the MR6.5K-38

The MR6.5K-38 is designed for cars and light trucks within its 6,500 lb. capacity. That includes sedans, coupes, hatchbacks, crossovers, many SUVs, and many light pickups. The low 4-inch drive-over height helps lower vehicles get on the platforms, and the flip-up runway extensions make the approach easier. Always confirm your vehicle’s weight and lift points before lifting.

Using the Rubber Spacer Blocks

The included rubber spacer blocks sit between the flat-top platforms and the vehicle’s lift points. They protect the vehicle’s underbody and help you match the lift to different vehicle heights and designs. Position each block under a manufacturer-approved lift point, raise the vehicle slightly, and check the contact before going higher. Replace any blocks that show cracks, tears, or heavy wear.

MR6.5K-38 detail

Setting Up Your Workspace

Choose a level concrete floor with room to drive on and off the MR6.5K-38 and walk all the way around the vehicle. Since the pneumatic lock release needs compressed air, place the lift within reach of your air line. Keep the power unit dolly near an appropriate outlet, and route hoses and cords so they won’t be driven over or tripped on. Good lighting overhead and a tool cart nearby will make every job smoother.

Moving the MR6.5K-38 Around Your Shop

One of the biggest advantages of the MR6.5K-38 is how easy it is to move. The included wheel kit attaches to the lift so you can roll it across the floor, and the tow bar gives you a firm handle to steer. The power unit rides on its own dolly, so it follows the lift without heavy lifting. This flexibility lets you set up the lift where it makes the most sense for the day’s work, then move it aside to free the bay for other jobs.

Before each move, make sure the lift is fully lowered, the area is clear, and the hoses and air line are disconnected or secured. Once in its new position, remove the wheel kit as directed and confirm the lift is sitting flat on a level surface.

Comfort and Productivity

Working at the right height reduces strain on your back, knees, and shoulders. At 38 inches, the MR6.5K-38 puts wheels and brakes at a natural working level. Technicians can sit on a rolling stool and move from corner to corner without getting up and down from the floor. Over a full day, that comfort translates into better focus, fewer mistakes, and more vehicles serviced.

Durability You Can Count On

The MR6.5K-38 is built with twin hydraulic cylinders, a sturdy scissor frame, and flat-top platforms designed for daily use. With basic maintenance, such as checking hoses, keeping the locks clean, and lubricating pivot points, it’s built for years of dependable service in demanding shop environments.

A Typical Brake Job on the MR6.5K-38

Here’s how a common brake service flows on the MR6.5K-38. Drive the vehicle onto the platforms and set the rubber spacer blocks under the lift points. Raise the vehicle to a comfortable height and lower it onto the locks. Loosen and remove the wheels, which are now right at chest or waist level. Inspect the pads, rotors, calipers, and hoses on all four corners without moving the vehicle. Replace parts as needed, torque the wheels back on, and lower the vehicle when you’re done.

Because every wheel is accessible at the same time, there’s no need to jack and re-jack individual corners. That saves time on every job and helps your technicians work in a steady, efficient rhythm.

MR6.5K-38 in use

A Typical Tire Change on the MR6.5K-38

Seasonal tire changes are another job where the MR6.5K-38 shines. With the vehicle raised, technicians can remove all four wheels quickly, roll them to the tire changer and balancer, and return them without bending to the floor. Many shops find that a mid-rise lift helps them handle more tire changes during the busy spring and fall seasons, when customer demand peaks.

Tips for Getting the Most From Your MR6.5K-38

  • Keep a chart of common vehicles and their lift points near the lift.
  • Store spare rubber spacer blocks close by so worn blocks can be replaced quickly.
  • Use a rolling stool and a tool cart to keep everything within reach.
  • Check the air supply before each shift so the lock release works smoothly.
  • Train every technician on the operating manual and safety procedures.
  • Schedule regular inspections of hoses, fittings, locks, and pivot points.

A Smart Investment for Growing Businesses

For a growing tire shop, detail business, or service center, adding a lift is a big step. The MR6.5K-38 offers a cost-effective way to add capacity without construction or a permanent installation. You can start with one lift and add more as demand grows, moving them around as your floor plan changes. It’s an investment that can help you serve more customers and work more comfortably every day.

Home enthusiasts benefit too. If you have a garage with a standard ceiling and want more than a floor jack can offer, the MR6.5K-38 gives you shop-style access to your car without major changes to your space.

Safety Habits for Every Shift

Good habits keep everyone safe around the MR6.5K-38. Before raising any vehicle, walk around the lift to make sure no tools, cords, or people are in the way. Confirm that each spacer block is correctly placed under a lift point. Raise the vehicle a few inches and check that it’s stable. After reaching working height, always lower onto the locks before starting work.

When lowering, clear the area again, remove tools from under the vehicle, and release the locks with the pneumatic control. Lower slowly and steadily. These simple steps, repeated every time, help prevent accidents and protect both your team and your customers’ vehicles. Post the manufacturer’s safety instructions near the lift so they’re always easy to review.

In the end, the MR6.5K-38 is about doing more work with less effort. It lifts quickly, holds the vehicle securely, puts the wheels at the right height, and moves wherever your shop needs it next. For businesses and enthusiasts who want those benefits without permanent construction, it is a dependable and practical choice that will serve well for many years.

Frequently Asked Questions About the MR6.5K-38

What is the capacity of the MR6.5K-38?

The MR6.5K-38 is rated for 6,500 lbs.

How high does it lift?

It raises vehicles to a working height of 38 inches.

What is the drive-over height?

The lift sits just 4 inches tall when lowered.

Is the MR6.5K-38 portable?

Yes. It includes a wheel kit, tow bar, and a dolly-mounted power unit.

How are the locks released?

It uses a pneumatic single-point, double-lock release system, so you’ll need a compressed air supply.

Does it need to be bolted down?

Follow the manufacturer’s installation instructions for your application. The design is built to be moved with the included wheel kit and tow bar.

What jobs is it best for?

Brakes, wheels, tires, inspections, detailing, and light suspension work.

Why Buy From Ironside Garage

Ironside Garage helps shops and home mechanics across the country choose the right lifting equipment. Our team can explain the differences between mid-rise, low-rise, and full-rise lifts, confirm that the MR6.5K-38 fits your vehicles and floor space, and help with shipping and delivery. We’re here before and after your purchase.

Order the MR6.5K-38 Today

The Tuxedo MR6.5K-38 is a proven, powerful, and portable mid-rise lift that speeds up wheel, brake, and detailing work. Learn more about the manufacturer on the official Tuxedo Lifts website, or explore our full car lifts collection for more options.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Tuxedo MR6.5K-38 6,500 lb Mid-Rise Portable Scissor Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery