BendPak LR-60P 6,000-lb. Capacity, Low-Rise Lift, Portable
$3,095.00
Choose “P” For Portable High-density UHMW rollers make the LR-60P a conveniently portable low-rise lift. If you’re regularly shifting car lifts to different service bays or have limited space you need to diversify, a portable lift will make your garage operations that much easier. These amazingly du
The BendPak LR-60P is a portable low-rise lift with a 6,000 lb. capacity and a 26-inch maximum lift height. It collapses to just 4 inches, rolls on UHMW rollers with a tow handle, and gives shops and home garages fast access to wheels, brakes, and suspension. This guide covers everything you need to know about the LR-60P.
Low-profile height
The LR-60P offers portability without adding bulk. The lift collapses to just 4″ high, so low-stance vehicles have no problem clearing the frame. This small-footprint model is not only ideal for tight spaces, but for garages with limited equipment that need to work in different places around the shop, or simply store the lift out of the way.
Single-point safety release
With the push of a button on the control panel, dual locks release on each frame of the LR-60P. The control panel keeps operators at a safe distance during descent, ensuring efficiency, peace-of-mind and a safe, smooth-running lift at all times.
Dropped crossbar
A dropped crossbar makes it easier to drive up and onto the frames. The center portion of each frame rises to engage the vehicle’s OEM jacking points. Since the crossbar improves stability without slowing or hindering operations, Wheel service and suspension work become a cinch.
Rugged steel channel frame
A steel channel runs along the base of the LR-60P. The added stability makes this an ideal lift for busy, active bays. With a five-year standard warranty and superior engineering put into the design, we guarantee you’ll work without worry for as long as you own your BendPak.
Industrial-grade hydraulic cylinder
Integrated into the single hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass.
Solid rubber lift blocks
This portable low-rise lift includes a set of durable hard-rubber blocks. They take all the use and abuse you can throw at them for years of maintenance-free lifting. We don’t even bother with or offer those thin, flimsy pads that damage your customers’ vehicles or get torn to shreds after a few uses. If you ever need to get these blocks replaced, BendPak offers same-day delivery on most orders.
Features & Specs
- 6,000-lb. lifting capacity
- Tow handle makes it easy to move lift from bay to bay
- Electric / hydraulic power system
- Multi-position safety locks
- Rubber lifting blocks included
- Dropped cross bar for added clearance
- Heavy-duty steel channel frame
Lifting capacity: 6,000 lbs. (2,724 kg)
Max lifting capacity front axle: 3,000 lbs. (1,361 kg)
Max lifting capacity rear axle: 3,000 lbs. (1,361 kg)
Max lifting height: 26″ (660 mm)
Max lift height + 1.5″ blocks: 27.5″ (699 mm)
Max lift height + optional 3″ blocks: 29″ (737 mm)
Overall pad length: 53″ (1,346 mm)
Overall width: 70.5″ (1,791 mm)
Overall length: 82″ (2,083 mm)
Lowered height: 4″ (102 mm)
Lifting time: 35 seconds
Lift pad dimension: 18″ x 52″ (457 mm x 2,591 mm)
Motor: 115/208 or 230 VAC / 50-60 Hz / 1 Ph
Shipping weight: 854-lbs. (387 kg)
Shipping dimensions: 73” x 84” x 20” (1,854 mm x 2,133 mm x 508 mm)
LR-60P Specifications
- Lifting capacity: 6,000 lbs.
- Max capacity per axle: 3,000 lbs. front and 3,000 lbs. rear
- Maximum lift height: 26 inches
- Collapsed height: 4 inches
- Electric/hydraulic power system
- Multi-position safety locks with single-point release
- Dropped crossbar and heavy-duty steel channel frame
- Solid hard-rubber lift blocks included
- High-density UHMW rollers and tow handle for portability
What Makes the LR-60P Different
Many low-rise lifts are bolted in place. The “P” in LR-60P stands for portable. High-density UHMW rollers and a tow handle let one person roll the lift from bay to bay or tuck it out of the way. BendPak describes these rollers as extremely durable and built to last, so moving the lift becomes part of everyday shop work instead of a chore.
That portability is a big advantage in shops with limited space or changing workflows. Use the LR-60P wherever it’s needed most, then move it aside when you need the floor for something else.
Low 4-Inch Profile
When lowered, the LR-60P is only 4 inches tall. Low-stance sports cars and lowered vehicles can clear the frame without trouble. That makes the LR-60P a strong choice for performance shops, tire shops, and enthusiasts who work on cars that sit close to the ground.
26 Inches of Lift
At its maximum height of 26 inches, the LR-60P raises the vehicle enough to remove wheels, service brakes, and work on suspension parts comfortably. Since it’s a low-rise lift, it’s quick to raise and lower, which keeps vehicles moving through your shop.

Single-Point Safety Release
With the push of a button on the control panel, dual locks release on each frame of the LR-60P. The control panel keeps the operator at a safe distance while the vehicle lowers. Multi-position safety locks hold the load securely at different heights, giving you flexibility for different jobs.
Dropped Crossbar for Easy Drive-On
A dropped crossbar makes it easier to drive up and onto the frames. The center of each frame rises to meet the vehicle’s OEM jacking points. The crossbar adds stability without getting in the way, so wheel service and suspension work stay quick and simple.
Rugged Steel Construction
A heavy-duty steel channel frame forms the base of the LR-60P. It’s built to stand up to daily use in a busy shop. Paired with solid hard-rubber lift blocks, it delivers years of dependable, low-maintenance lifting.
Solid Rubber Blocks That Last
The LR-60P comes with durable hard-rubber blocks instead of thin pads that can tear or damage vehicles. They’re designed for years of maintenance-free use. If you ever need replacements, BendPak offers same-day shipping on most orders.

Who Should Buy the LR-60P
- Tire and wheel shops that need quick access to all four corners
- Brake and suspension specialists
- Performance shops working on lowered vehicles
- Detailers who need to reach lower panels and wheel wells
- Home garages with limited ceiling height
- Shops that need to move lifts between bays
Compare more options in our portable car lifts category.
How to Use the LR-60P
- Roll the lift into position using the tow handle.
- Make sure it sits on a flat, level, hard surface.
- Drive the vehicle over the lift, using the dropped crossbar for easy approach.
- Position the rubber blocks under the vehicle’s OEM jacking points.
- Raise slightly and check each block for proper contact.
- Raise to the desired height and lower onto the safety locks.
- To lower, press the single-point release and lower from a safe distance.
Safety Tips
Always lower the LR-60P onto its safety locks before working on the vehicle. Respect the 6,000 lb. total capacity and the 3,000 lb. limit per axle. Keep the area clear during lifting and lowering, and use the control panel from a safe distance. Check hoses, fittings, and blocks regularly, and follow BendPak’s operating manual.
Jobs the LR-60P Handles Best
- Tire changes and rotations
- Brake pads, rotors, and calipers
- Suspension checks and repairs
- Wheel alignment prep and inspections
- Detailing and paint protection on lower panels
- Body work on rocker panels and lower doors

Floor and Space Requirements
Use the LR-60P on a hard, level concrete floor. Avoid cracks, slopes, and uneven surfaces. Since it’s a low-rise lift, it doesn’t need extra overhead clearance, which makes it a good fit for garages with standard ceilings. Leave enough room to drive on and off and walk around the vehicle.
Keeping the LR-60P in Top Condition
- Inspect hydraulic hoses and fittings for leaks or wear.
- Check the hydraulic fluid level in the power system.
- Keep the locks clean and working freely.
- Inspect the rubber blocks and replace them if damaged.
- Keep the rollers and frame free of debris.
LR-60P vs. Floor Jacks and Stands
Jacks and stands slow you down when you’re servicing many vehicles. Each corner has to be lifted and supported separately. The LR-60P lifts the vehicle at its OEM jacking points in one smooth motion, holds it on safety locks, and releases with a single button. It’s faster, more stable, and easier on your back.
LR-60P vs. a Two-Post Lift
A two-post lift is great when you need to stand under a car, but it requires a tall ceiling, a strong slab, and a permanent spot. The LR-60P is portable, needs no overhead clearance, and is quick to use for wheel and brake work. Many shops use both: a two-post lift for big jobs and the LR-60P for quick service.

Moving the LR-60P Between Bays
Thanks to its UHMW rollers and tow handle, moving the LR-60P is a one-person job. Lower the lift fully, clear the path, and roll it to the next bay. This flexibility helps shops adapt to changing workloads. On a busy tire day, you can move the lift to the bay closest to the tire machine. When you need the floor for other work, roll it aside. That kind of flexibility is hard to match with a fixed lift.
Home garage owners benefit too. You can roll the LR-60P to one side of the garage when it’s not in use, keeping parking space open for daily drivers.
A Day in the Shop With the LR-60P
Picture a typical morning in a busy tire shop. A customer pulls in for a seasonal tire swap. The technician drives the car over the LR-60P, places the rubber blocks under the jacking points, and raises it. In moments, all four wheels are off the ground at a comfortable height. Wheels come off, tires are swapped and balanced, wheels go back on, and the car is lowered with a single button press. The LR-60P is ready for the next vehicle.
Next, a brake job comes in. The same quick routine gets the car up, and the technician has easy access to every corner. Without jacking and re-jacking, the job moves faster and the technician stays fresher through the day.
Built for Lowered and Performance Cars
Lowered cars are a challenge for many lifts. The 4-inch collapsed height and dropped crossbar of the LR-60P make it easier for low vehicles to drive on. Performance shops can service sports cars, tuner builds, and track cars without ramps or extra blocks. That makes the LR-60P a practical choice for enthusiast-focused businesses.
Why Shops Trust BendPak
BendPak is a well-known name in automotive lifts. The LR-60P reflects that experience with a rugged steel channel frame, dependable hydraulics, durable rubber blocks, and a safety release system designed with the operator in mind. Learn more about the brand on the official BendPak website.

Choosing Between Low-Rise and Mid-Rise Lifts
When shopping for a portable lift, many buyers compare low-rise and mid-rise models. A low-rise lift like the LR-60P is compact, quick, and easy to move. It raises the vehicle up to 26 inches, which is perfect for wheels, tires, and brakes. A mid-rise lift goes higher, often into the high 30s or 40s in inches, which can be more comfortable for longer jobs but usually means a larger, heavier unit.
If your work centers on fast wheel and brake service, and you value portability and a small footprint, the LR-60P is an excellent fit. If you want more height for extended under-car work, a mid-rise or full-rise lift may suit you better. Our team can help you weigh the options.
Getting the Best Results
- Keep a reference chart of OEM jacking points for the vehicles you service most.
- Check block placement after the first few inches of lift every time.
- Keep the floor around the lift clean and free of oil and debris.
- Store spare rubber blocks nearby for quick replacement.
- Train every operator on the control panel and safety release.
- Schedule routine inspections of hoses, fittings, and locks.
Comfort for Your Technicians
Working on wheels and brakes all day is tough on the body when vehicles sit on the ground. The LR-60P lifts cars to a height where technicians can sit on a stool and work without constant bending and kneeling. That comfort helps your team stay focused and productive through long, busy days. It also reduces the physical strain that can lead to fatigue and injury over time.
A Smart Investment
For shops looking to add capacity without construction, the LR-60P is a cost-effective solution. There’s no need to pour new concrete or build out a dedicated bay. Roll it in, plug it in, and start lifting. As your business grows, you can add more portable lifts and arrange them to fit your floor plan. For home mechanics, the LR-60P offers shop-quality access in a package that fits a standard garage.
Planning Your Shop Layout Around the LR-60P
A little planning goes a long way. Decide where the LR-60P will spend most of its time, ideally near your tire changer, balancer, and brake tools. Make sure there’s a power source close by for the electric/hydraulic system and that cords and hoses won’t be driven over. Mark a parking spot for the lift when it’s not in use so it’s always easy to find and never blocks a walkway.
Good overhead lighting, a rolling stool, and a tool cart will make every job on the LR-60P faster and more comfortable. With a well-planned layout, your team can move from one vehicle to the next with minimal downtime.
Built to Keep Working
With its steel channel frame, durable hydraulics, solid rubber blocks, and practically indestructible rollers, the LR-60P is made for daily use. Basic care, such as keeping it clean, checking fluid and hoses, and replacing worn blocks, keeps it running smoothly for years. That reliability is what makes it such a dependable addition to any shop or serious home garage, whether you service a handful of cars a month or dozens every week.
Ready to make wheel, brake, and suspension work faster and easier? The LR-60P brings portable, low-profile lifting to any shop or garage with a level floor. It installs without construction, moves with one person, and lifts with the push of a button, giving your team more time to focus on quality work and happy customers.
Frequently Asked Questions About the LR-60P
How much can the LR-60P lift?
It is rated for 6,000 lbs., with up to 3,000 lbs. on each axle.
How high does the LR-60P lift?
It reaches a maximum lift height of 26 inches.
How low is the LR-60P?
It collapses to just 4 inches.
Is it easy to move?
Yes. High-density UHMW rollers and a tow handle let one person move it between bays.
How do the locks release?
One button on the control panel releases the dual locks on each frame.
Are lift blocks included?
Yes. Solid hard-rubber lift blocks come with the LR-60P.
Support From Ironside Garage
Our team helps shops and home mechanics choose the right lift for their space and vehicles. We can explain the differences between low-rise, mid-rise, and full-rise lifts, confirm fit, and help with delivery. Contact us any time with questions about the LR-60P.
Order the LR-60P Today
The BendPak LR-60P is a proven, powerful, and portable low-rise lift that speeds up wheel, brake, and suspension work. Explore more lifting options in our full car lifts collection.
Related products
Atlas 7K-Kwik-Bay Portable Mid-Rise 7000 lbs Capacity Scissor Lift
The Atlas® 7K Kwik Bay is a free standing 7,000 lb. capacity portable scissor lift. The Atlas® 7K Kwik Bay is the perfect lift for Commercial Quick Service Bays and wheel service specialists that need extra lifting height. This portable lift easily raises a 7,000 lb. car or truck to a comfortable wo
BendPak LR-10000 10000 lb Capacity Low-Rise Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel
BendPak P-9000LT Car Lift
Challenger DX77 7700 lb ALI Certified Scissor Lift
Challenger DX77 7700 lb ALI Certified Scissor Lift Looking for a scissor lift that can easily handle many makes and models while ensuring maximum productivity and safety? Look no further than the DX77. With a robust 7,700 lbs. capacity and a synchronized hydraulic system, this lift can handle many v

Reviews
There are no reviews yet.