Challenger EV1220 12000 lb ALI Certified Heavy Duty Inground Car Lift
$13,324.00
Challenger EV1220 12000 lb ALI Certified Heavy Duty Inground Car Lift Challenger’s electric hydraulic cassette-style 12,000 lb. capacity inground lift meets the demands of professional service facilities. With a smaller footprint, your shop can maximize service bays. The EV1220 comes standard with t
Looking for a reliable inground lift? The Challenger EV1220 delivers the durability, safety and ease of use that busy service bays demand. This page covers the Challenger EV1220 features, specifications, installation planning and care so you can buy with confidence.
Challenger EV1220 Features and Specifications
Challenger EV1220 12000 lb ALI Certified Heavy Duty Inground Car Lift
- 12,000 lb. lift capacity
- 3-stage front and 3-stage rear arms provide access to the lift points of a wide range of cars and trucks within the service bay, maximizing revenue potential
- 8 1/2” diameter chrome pistons provide greater stability under load
- Chrome non-breathing ram style cylinder provides for longer lift life
- Enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings
- Long bearing contact provides increased stability
- Mechanical lock engages every 3? allows ergonomic working height for technicians to increase productivity and minimize fatigue
- Stainless steel air lock release cylinder promotes longer working life with its corrosion resistant design
- Fully-contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground
- Heavy-duty polyurethane screw pads accommodate a wide range of recommended lifting points
- 87″ drive-thru accommodates wider vehicles, minimizes tire damage and provides for easy drive-on
- Wide range of upgrades to further customize your fleet
- Premium powder coat finish on bolsters and arms provides long-lasting durability
| Model Number | EV1220 |
|---|---|
| Lifting Capacity | 12,000 lbs. |
| Arms | 3-stage front/3-stage rear |
| Stroke | 68” |
| Rise Height | 80.75” |
| Width Overall | 115” |
| Drive-Thru Clearance | 87” |
| Reach (Arm Minimum) | 19.625” |
| Reach (Arm Maximum) | 48” |
| Screw Pad Height | 5” – 6.75” |
| Capacity | 3,000 lbs. per arm |
| Guide Plunger Diam. | 8.5” |
| Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph |
| Speed of Rise | 60 s |
| Air Required | 90 – 120 psi |
| ALI/ETL Certified | Yes |
| Super Structure Colors | Red, Blue, Black |
Challenger EV1220 Photos

Key Highlights of the Challenger EV1220
Here is a quick summary of what stands out on this inground lift:
- Challenger EV1220 12000 lb ALI Certified Heavy Duty Inground Car Lift
- 12,000 lb. lift capacity
- 8 1/2” diameter chrome pistons provide greater stability under load
- Chrome non-breathing ram style cylinder provides for longer lift life
- Long bearing contact provides increased stability
Why Shops Choose the Challenger EV1220
c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`
Benefits of a Quality Inground Lift
Reliable equipment is one of the best investments a shop can make. A dependable inground lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.
Common Uses for the Challenger EV1220
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the Challenger EV1220
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the Challenger EV1220 from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Inground Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right inground lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the official Challenger website.
Challenger EV1220 FAQs
Do I need special concrete for the Challenger EV1220?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Challenger EV1220 or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the inground lift correctly, which protects your investment and your technicians.
How is the Challenger EV1220 shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Challenger EV1220 come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Choosing the Right Inground Lift
When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Challenger EV1220 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.
It also pays to think about the future. Choosing a inground lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.
What to Expect After You Order
After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.
Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.
Related products
BendPak LR-60P Car Lift
BendPak MDS-6EXT Car Lift
BendPak P-9000LTF Car Lift
BendPak SP-7XE Car Lift
BendPak SP-7XE Car Lift The SP-7XE is a space-saving, frame engaging lift from BendPak. This high-quality lift features no cross members at all, meaning installation is easier than ever. This lift can easily accommodate most passenger vehicles as well as light trucks, and it comes loaded with pneuma
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take
Rotary RLP77 7700 lb ALI Certified Low Profile Double Scissor Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.