BendPak SP-7XEF Car Lift
$11,295.00
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take
The BendPak SP-7XEF is a professional-grade scissor lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the BendPak SP-7XEF, along with setup tips, maintenance advice and answers to common questions.
BendPak SP-7XEF Features and Specifications
Open-Center Design
The lift offers 68” inches of lifting height and an open center which many mechanics appreciate because it allows them to have comfortable standing room to perform oil changes, transmission drops, and many other kinds of undercarriage services.
No Cross Member
The SP-7XLF is installed and mounted flush into the flooring without the need of a cross member. This allows for a true open-center design that provides access to all critical undercarriage areas without needing operators to stoop or crawl across the floor. There is no need for a cross member due to the reinforced steel at the base and along the top of the runways which help provide a stable lift.
Large Base Frame
The lift features a rugged boxed-steel formed base frame which increases stability and reduces stress on the overall structure. The elongated base provides a solid foundation which will allow for a smooth, perfectly level rise.
An electric hydraulic power system is kept in a sturdy console box that is off to the side of the lift. The controls are easy to reach and allow you to keep your eyes on your surroundings while lifting and lowering heavy vehicles.
Dual Master Hydraulic Cylinder
The SP-7XLF comes sporting two hydraulic cylinders with flow restrictors that ensure an even lift. The lift has these in order to push the frames out from the flush-mount position as fast as possible. The design is sophisticated enough to lessen the risk of tipping, even if one cylinder loses pressure (due to an unlikely rupture or pinch, for instance). There isn’t a scenario that will result in the up-ending of your vehicle. Rather, the car lift would simply descend to the ground evenly on both frames.
Pneumatic Safety Locks
The lift has a single operator stand which allows you to release the pneumatic safety locks from a safe distance without having to worry about manually lifting release arms or latches. The locks will engage or disengage seamlessly at each position.
Hardened Pivot Pins with Zerk Fittings
The pivot pins are Zerk grease fittings and are self-lubricating. They offer a long-lasting service, and they ensure a smooth rise and descent of the lift at all times
Durable Cushioned Contact Blocks
The lift also comes with durable, cushioned rubber contact blocks. They can be set atop the rubber padding on the lift platforms to safely and securely engage vehicle pinch rails and OEM frame lift points.
Features
- Flush-mount
- 7,000-lb. lifting capacity
- Pneumatic safety locks
- Hardened pivot pins with “Zerk” fittings
- Open-center design
- Ergonomic controls
- Dual-cylinder hydraulic design provides extra power
- Low-profile
Specs
Lifting Capacity: 7,000 lbs. (3,175 kg)
Max height raised: 70.5″ (1,791 mm)
Single platform length: 62.5″ (1,590 mm)
Single platform width: 22″ (554 mm)
Overall length: 105.5″ (2,692 mm)
Overall width – Min: 81.5″ (2,068 mm)
Overall width – Max: 87.5″ (2,218 mm)
Lowered lift height: Flush with concrete
Lifting time: 45 seconds
Motor: 208-240 VAC / 50-60 Hz / 1Ph
Shipping weight: 2,218-lbs. (1,006 kg)
Shipping dimensions: 105” x 27” x 45” (2,667 mm x 685 mm x 1,143 mm)
BendPak SP-7XEF Photos

Key Highlights of the BendPak SP-7XEF
Here is a quick summary of what stands out on this scissor lift:
- 7,000-lb. lifting capacity
- Pneumatic safety locks
- Hardened pivot pins with “Zerk” fittings
- Open-center design
- Ergonomic controls
Why Shops Choose the BendPak SP-7XEF
c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`
Benefits of a Quality Scissor Lift
The best scissor lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the BendPak SP-7XEF
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the BendPak SP-7XEF
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the BendPak SP-7XEF from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Scissors Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right scissor lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the official BendPak website.
BendPak SP-7XEF FAQs
Do I need special concrete for the BendPak SP-7XEF?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak SP-7XEF or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the scissor lift correctly, which protects your investment and your technicians.
How is the BendPak SP-7XEF shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the BendPak SP-7XEF come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
BendPak LR-10000 10000 lb Capacity Low-Rise Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
BendPak MD-6XP Car Lift
BendPak MDS-6LP Car Lift
BendPak MDS-6LP Car Lift The MDS-6LP sports an open-center design which makes it one of the best options in terms of convenience and work productivity. This lift can handle vehicles weighing up to 6,000 lbs. BendPak has crafted this lift for home garages, full-service shops, quick-lube pits, and rea
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel
Dannmar DLR-6P Car Lift
Dannmar DLR-6P Car Lift The DLR-6P is a high-quality low-rise lift from Dannmar that helps you move along on wheels! Its high-density roller wheels are the secret to how the DLR-6P is such a convenient portable low-rise lift. With a mobile lift you’ll gain the ability to easily relocate your lift wi
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.