Bendpak RBJ15000 15,000-lb. Capacity / Rolling Bridge Jack
$5,895.00
Lift 15,000 lbs. for Full Wheel Service Capability The RBJ15000 bridge jack is capable of lifting half of a 30,000-lb. truck or commercial bus. The HD-35 car lift is a heavy-duty machine meant for professional shops that deal with massive, specialty equipment. If you have a truck lift, you have easy
The Bendpak RBJ15000 is a professional-grade bridge jack built for shops that need dependable performance every day. Below you will find the full features and specifications of the Bendpak RBJ15000, along with setup tips, maintenance advice and answers to common questions.
Bendpak RBJ15000 Features and Specifications
Rubber contact pads
BendPak bridge jacks feature rubber contact pads that are tougher than the rest. Resilient, sturdy and long-lasting, they never mark up or scratch your vehicle chassis or undercarriage. The jack is low-profile, so the pads fit comfortably underneath low-stance cars.
Stackable adapters
While the pads sit low enough for low ground-clearance vehicles, high-clearance vehicles have a tendency to lose lift with frame-engaging jacks. BendPak solves this issue with stackable adapters that come standard with every bridge jack. Better yet, two jacks allow you to lift a massive 30,000-lb. vehicle completely off its wheels.
High-pressure hydraulic power unit
The power unit to this jack is completely pneumatic-hydraulic. A small airline is attached to the bridge jack and is controlled with an ergonomically designed foot pedal. Two bridges jacks can share a single airline with the addition of BendPak’s exclusive, optional airline kit.
Three lock levels
Raise your jack to three different heights—whatever is most comfortable for you. The work you do varies, so if all you need is to lift the wheels a few inches, just enough to remove them, BendPak makes it easy. Rolling bridge jacks also give a little more raise for extra undercarriage clearance and comfort.
Features
- 15,000-lb. lifting capacity
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
RBJ15000 Specifications
Capacity
Lifting Capacity* 15,000 lbs. (6,804 kg)
Rise
A – Max. Height + Pad Only: 23″ (584 mm)
B – Max. Height + Pad + Adapter: 26″ (660 mm)
C – Min. Height + Pad Only: 14″ (356 mm)
D – Min. Height + Pad + Adapter: 17″ (432 mm)
Time to Full Rise: 45 seconds
Reach
F – Support Arm Width: 44.9″ (1,140 mm) –
G – Max. Arm Reach: 63.75″ (1,619 mm)
H – Min. Arm Reach: 39.5″ (1,003 mm)
Power Unit
Motor: Air-Hydraulic Pump
Noise: 45 dB
Shipping
Weight: 570
Dimensions: 36″ x 22″ x 21″ / 914 mm x 559 mm x 533 mm
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
Bendpak RBJ15000 Photos




Key Highlights of the Bendpak RBJ15000
Here is a quick summary of what stands out on this bridge jack:
- 15,000-lb. lifting capacity
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
Why Shops Choose the Bendpak RBJ15000
c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`
Benefits of a Quality Bridge Jack
The best bridge jack is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the Bendpak RBJ15000
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the Bendpak RBJ15000
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the Bendpak RBJ15000 from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Bridge Jacks to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right bridge jack for your shop.
For product manuals, technical documentation and manufacturer details, visit the official BendPak website.
Bendpak RBJ15000 FAQs
Do I need special concrete for the Bendpak RBJ15000?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Bendpak RBJ15000 or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the bridge jack correctly, which protects your investment and your technicians.
How is the Bendpak RBJ15000 shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Bendpak RBJ15000 come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Choosing the Right Bridge Jack
When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Bendpak RBJ15000 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.
It also pays to think about the future. Choosing a bridge jack with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.
What to Expect After You Order
After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.
Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.
Related products
Atlas 7K-Kwik-Bay Portable Mid-Rise 7000 lbs Capacity Scissor Lift
The Atlas® 7K Kwik Bay is a free standing 7,000 lb. capacity portable scissor lift. The Atlas® 7K Kwik Bay is the perfect lift for Commercial Quick Service Bays and wheel service specialists that need extra lifting height. This portable lift easily raises a 7,000 lb. car or truck to a comfortable wo
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift We’re not just talking a big game; we’re offering the first open-center mid-rise lift ever made. Decades of experience have taught us a thing or two about vehicle lift points. A car lift with longer platforms means you get to lift more vehicle t
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel

Reviews
There are no reviews yet.