Bendpak RJ9W 9,000-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
$4,495.00
Lift 9,000 lbs. for Full Wheel Service Capability With a 14,000-lb. capacity lift, you might think the RJ7W rolling bridge jack is sufficient for your vehicle. However, vehicles that max out a lift’s capacity might have offset centers of gravity. In such cases, the RJ7W is not suitable to lift thos
The Bendpak RJ9W brings proven design and solid construction to your shop. Read on for detailed specifications of the Bendpak RJ9W, practical setup guidance and the answers to questions our customers ask most often.
Bendpak RJ9W Features and Specifications
Easy-Roll Wheels Come Standard
The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models 18,000-lbs lifting capacity or greater and provide effortless gliding along the runways for easy positioning and adjustability. BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability.
Rubber contact pads
Rubber contact pads are essential lifting components. They increase rise and firmly engage your vehicle’s undercarriage lift points. The durable yet non-marring surface ensures vehicles are not scraped or damaged during rolling bridge jack or car lift operation.
Stackable adapters
The ability to stack and unstack BendPak contact pads increases the versatility of your rolling bridge jack. These adapters are also useful for lifting vehicles that may have drastically different front-and-rear suspensions. With two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift.
High-pressure hydraulic power unit
BendPak’s rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack. The car lift runs off its own power unit, so there’s no “sharing” of hydraulic power between the two. An airline must be attached to the rolling bridge jack with 125 psi and 10 – 20 CFM. Easy foot pedal control is included for your safety and convenience.
Three lock levels
With three lock positions, your rolling bridge jack can be raised to the level most comfortable for you. Find the perfect height for the perfect job as you also adjust the height of your car lift.
Features & Specs
- 9,000-lb. lifting capacity
- Easy-Roll Wheels
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
RJ9W Specifications
Min. Drive-Over Height*
Max. Lifting Height*
Reach
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
Bendpak RJ9W Photos



Key Highlights of the Bendpak RJ9W
Here is a quick summary of what stands out on this bridge jack:
- 9,000-lb. lifting capacity
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
Why Shops Choose the Bendpak RJ9W
c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`
Benefits of a Quality Bridge Jack
Reliable equipment is one of the best investments a shop can make. A dependable bridge jack cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.
Common Uses for the Bendpak RJ9W
c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`
Installation and Setup
c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`
Safety and Maintenance Tips for the Bendpak RJ9W
c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`
Buy the Bendpak RJ9W from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Bridge Jacks to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right bridge jack for your shop.
For product manuals, technical documentation and manufacturer details, visit the official BendPak website.
Bendpak RJ9W FAQs
Do I need special concrete for the Bendpak RJ9W?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Bendpak RJ9W or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the bridge jack correctly, which protects your investment and your technicians.
How is the Bendpak RJ9W shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Bendpak RJ9W come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Choosing the Right Bridge Jack
When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Bendpak RJ9W is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.
It also pays to think about the future. Choosing a bridge jack with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.
Related products
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
BendPak MDS-6EXT Car Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel

Reviews
There are no reviews yet.