Atlas Extra Large Pressurized Sandblast Cabinet
$4,199.00
Atlas Extra Large Pressurized Sandblast Cabinet The Atlas PSBC990 pressurized sandblast cabinet features a higher velocity stream that allows work to be done up to 4 times faster than other sandblast cabinets on the market. The direct pressure system which pneumatically pushes the blast media throug
The Atlas PSBC990 is an extra-large pressurized sandblast cabinet for faster, stronger blasting. A pressure tank below the media hopper delivers an adjustable, high-pressure flow of abrasive, while a 46 x 34 x 33.5-inch work area, built-in LED light, standing bench, and powerful vacuum make the PSBC990 ideal for demanding shops.
Atlas Extra Large Pressurized Sandblast Cabinet
Features and Benefits
Large Media Blasting Cabinet
Work area: 46” x 34” x 33 1/2”
Pressurized for Stronger and Faster Blasting
Foot operated control valve
Heavy Duty blasting gun with replaceable ceramic nozzles
Self-contained dust collection system with cartridge filter and convenient bottom gate clean-out
Extra Large Front/Top Load Door
Built in LED Light
Standing Bench for Easier Access Included
Extra nozzles and plastic protectors included
110V Power
Recommended media – Glass Bead (NOT INCLUDED)
Replacement Parts & Wear Items Always in Stock
This part number FREIGHT PREPAID
The Atlas PSBC990 uses a powerful vacuum system to keep the work area free of “floating” rust and used media. After the glass bead contacts the surface to be cleaned, a portion of the bead is “destroyed” becomes almost weightless. The vacuum system removes the “floating” rust particles and the “used up” glass beads.
The Atlas PSBC990 has a large front folding door for easy loading and unloading. It has excellent lighting and a very powerful vacuum system. The lower hopper stores the abrasive material for use and reuse and opens easily to allow easy removal of any media. The pressurized tank below the hopper allows for an adjustable, high pressure air flow of abrasive material to be blasted.
Atlas PSBC990 Sandblast Cabinet Specifications
Work Area: 46″ W x 34″ D x 33 1/2″ H
Overall Dimensions: 56 1/2″ W x 65″ D x 81″ H
Window Dimensions: 12 3/4″ x 27 1/4″
Gloves: 24″ Gauntlet
Interior Weight Capacity: 220 lbs
Power gun: NE490 Foot Pedal w/ Gun
Vacuum: Attached
Electric Requirement: 110volt
Air Requirement: 24 cfm/125 PSI (External Air Supply Required)
Shipping Weight: 600 lbs
PSBC990 Specifications
- Work area: 46″ W x 34″ D x 33.5″ H
- Overall dimensions: 56.5″ W x 65″ D x 81″ H
- Viewing window: 12 3/4″ x 27 1/4″
- Interior weight capacity: 220 lbs.
- Gloves: 24-inch gauntlet
- Power gun: NE490 with foot pedal
- Vacuum: attached
- Electrical: 110V
- Air requirement: 24 CFM at 125 PSI (external air supply required)
- Shipping weight: 600 lbs.
PSBC990 Features
- Pressurized blasting for stronger, faster results
- Adjustable, high-pressure abrasive flow from a pressure tank
- Extra-large front folding/top load door
- Built-in LED light
- Standing bench included for easier access
- Foot-operated control valve
- Heavy-duty gun with replaceable ceramic nozzles
- Self-contained dust collection with cartridge filter
- Lower hopper that stores and reuses media, with easy media removal
- Extra nozzles and window protectors included
- Recommended media: glass bead (not included)
Why Pressurized Blasting?
Most cabinets use siphon (suction) feed, where air passing through the gun draws media up from the hopper. A pressurized cabinet like the PSBC990 pushes media through the hose from a pressure tank. That delivers a stronger, more concentrated stream of abrasive, which can clean parts significantly faster, especially when removing heavy rust, scale, or thick coatings. The flow is adjustable, so you can tune it to the job.
Extra-Large Work Area
The 46 x 34 x 33.5-inch work area and 220-lb. interior weight capacity let you blast large and heavy parts. The front folding door and top load opening make it easier to load bulky components without strain.
Built-In LED Lighting
Good lighting is essential for thorough blasting. The PSBC990’s built-in LED light brightens the interior so you can clearly see the surface and spot areas that need more work.
Standing Bench Included
An included standing bench raises the operator to a comfortable working height at the window and gloves. That improves comfort during long sessions and helps operators of different heights work effectively.
Who Should Buy the PSBC990
- Powder coating and paint shops with high volume
- Restoration shops removing heavy rust and scale
- Wheel refinishing businesses
- Fabrication and welding shops
- Truck, equipment, and industrial repair shops
Explore more tools in our shop equipment section.
How to Use the PSBC990
- Connect an air supply capable of 24 CFM at 125 PSI.
- Plug in the vacuum and LED light (110V) and switch them on.
- Fill the hopper with glass bead or another suitable media.
- Pressurize the tank and set the abrasive flow for the job.
- Load the part through the front or top door, then close it.
- Step onto the standing bench, put on the gloves, and use the foot pedal to blast.
- When finished, release the pedal, let the vacuum clear the cabinet, and unload.
Safety Guidelines
Pressurized systems require care. Follow the manufacturer’s instructions for pressurizing and depressurizing the tank. Keep the doors closed while blasting, always use the gloves, and run the vacuum during operation. Wear eye protection when loading and unloading, use the standing bench properly, and never exceed the 220-lb. interior capacity. Dispose of spent media and dust according to local regulations.


Maintenance Tips
- Inspect the pressure tank, fittings, and hoses regularly.
- Replace worn nozzles and gloves promptly.
- Change window protectors when they become cloudy.
- Clean or replace the cartridge filter.
- Keep media dry and remove spent media from the hopper.
- Drain moisture from your air system daily.
PSBC990 vs. the SBC990
Atlas’s SBC990 offers the same large work area with siphon-style blasting. The PSBC990 adds a pressurized media feed for faster, more aggressive cleaning, plus a built-in LED light and a standing bench. If your shop handles heavy rust, thick coatings, or high volumes, the pressurized PSBC990 can save significant time. For lighter-duty cleaning, the SBC990 may be enough.
Speed That Pays for Itself
In a production environment, blasting time directly affects profitability. When parts move through the cabinet faster, more jobs get finished each day. The PSBC990’s pressurized feed delivers a more forceful stream of media, cutting through rust, mill scale, and old coatings more quickly than many siphon systems. For powder coaters, restorers, and fabricators who blast every day, that time savings adds up week after week.
Adjustable Abrasive Flow
Not every part needs maximum force. Delicate parts and thin sheet metal benefit from a gentler stream, while heavily rusted castings can take more. The PSBC990’s adjustable flow lets you tune the abrasive delivery to each job, balancing speed with care for the workpiece.
Reusing Media Efficiently
The lower hopper stores media for use and reuse. As you blast, usable media falls back into the hopper while the vacuum removes fine dust and broken-down particles. That helps keep the media clean and effective longer, reducing waste and cost. When media is worn out, the hopper opens easily for removal.
Blasting Wheels and Large Parts
With a 220-lb. interior capacity and a large work area, the PSBC990 can handle wheels, large brackets, suspension parts, and housings. Load parts through the front folding door or the top opening, position them for full coverage, and use the LED light to make sure every surface is clean.
Prepping for Powder Coating
Powder coat demands a clean, properly profiled surface. Pressurized blasting with the PSBC990 quickly removes old finishes and contamination and leaves a surface the powder can grip. High-volume powder coating shops benefit greatly from the faster cycle times.
Planning Your Space
The PSBC990 is a large cabinet at about 56.5 inches wide, 65 inches deep, and 81 inches tall, including space for the standing bench. Choose a level area with clearance to open the doors, access to 110V power, and a nearby air supply capable of 24 CFM at 125 PSI.
Sizing Your Compressor
The PSBC990 requires 24 CFM at 125 PSI. Pressurized blasting relies on a steady air supply, so check the compressor’s delivered CFM at that pressure rather than its peak rating. If the compressor can’t keep up, pressure will drop and blasting will slow. A dryer or water separator helps keep media flowing freely. Our team can help you confirm whether your compressor is adequate.


Blasting Technique
With pressurized media, technique matters even more. Start with a moderate flow setting and adjust as needed. Keep the nozzle moving in smooth, overlapping passes, and avoid dwelling on thin metal. Rotate parts to reach every surface, and use the LED light to check your progress. Good technique produces an even finish quickly without damaging parts.
Protecting Sensitive Areas
Mask machined surfaces, bearing bores, threads, and sealing faces before blasting. Pressurized media is aggressive and can damage precision areas. After blasting, clean parts thoroughly to remove any media from passages, threads, and crevices before painting or reassembly.
What Users Appreciate
Users often say the pressurized feed is the biggest upgrade they notice compared with siphon cabinets: parts simply clean faster. The built-in LED light and standing bench also earn praise for making long sessions more comfortable. The large door and roomy interior round out a cabinet built for serious work.
A Typical Production Day
At a busy powder coating shop, the PSBC990 runs most of the day. In the morning, the operator pressurizes the tank, checks the media level, and switches on the vacuum and LED light. Batches of brackets, frames, and wheels move through the cabinet one after another. The pressurized stream strips old coatings quickly, and the operator adjusts flow for thinner parts. Cleaned parts go straight to the masking and coating area. By the end of the shift, the shop has prepped far more parts than it could with a siphon cabinet, keeping the coating line busy and customers’ jobs on schedule.
Restoration Shops
Restoration shops often deal with decades of rust and layers of paint. The PSBC990’s pressurized blasting cuts through these quickly, saving hours on large projects. Suspension parts, brackets, and other components come out clean and ready for refinishing, and the large interior handles bigger pieces that won’t fit in standard cabinets.
Fabrication and Industrial Use
Fabricators and industrial maintenance teams use the PSBC990 to remove mill scale before welding or painting and to clean worn equipment parts. The pressurized feed handles heavy scale efficiently, and the 220-lb. interior capacity accommodates substantial components.
Keeping Media Dry and Flowing
Pressurized systems are especially sensitive to moisture. Wet media can bridge in the tank or clog the hose. Use a dryer or water separator, drain your compressor daily, and store media in a dry location. Replace damp media rather than trying to use it.
Investing in Productivity
For shops where blasting is a daily task, the cabinet is a production tool, not just an accessory. Faster cleaning means more parts processed, shorter lead times, and more revenue. The PSBC990’s pressurized feed, large capacity, and comfort features are designed to maximize productivity while keeping the work clean and contained. Many shops find the time saved quickly justifies the investment compared with a siphon cabinet.
Comfort for Long Sessions
Blasting for hours can be tiring. The PSBC990’s standing bench positions the operator at the right height for the gloves and window, reducing strain on the shoulders and back. The LED light reduces eye fatigue by brightening the interior, and the foot pedal lets operators keep both hands on the work. Comfortable operators work more carefully and consistently, which improves results.


Dust Control
The attached vacuum with a cartridge filter pulls fine dust and broken-down media out of the cabinet. That keeps the view clear and helps prevent dust from escaping into the shop. Clean or replace the filter regularly to maintain strong airflow, and empty collected dust according to local regulations.
Choosing Nozzles
Replaceable ceramic nozzles let you choose the right opening for the job and your compressor. Larger openings cover more area but use more air; smaller openings offer precision and lower air consumption. Replace nozzles as they wear, since enlarged openings waste air and reduce performance.
Getting Started
If your shop needs fast, heavy-duty blasting for large parts, the PSBC990 is a strong choice. Contact our team to confirm your air supply, choose media, and arrange freight delivery.
Wheel Refinishing With Pressure
Wheel refinishers deal with brake dust, corrosion, and old coatings baked onto complex shapes. Pressurized blasting with the PSBC990 reaches into spoke windows and barrel corners more effectively than many siphon systems. After removing tires, weights, and valve stems and masking bead seats and the center bore, operators can strip wheels quickly and evenly. The interior capacity and large door make loading wheels simple, and the LED light helps confirm every surface is clean before coating.
Truck and Equipment Components
Heavy-duty parts often carry thick layers of rust and scale. The PSBC990’s pressurized stream tackles these efficiently, preparing parts for inspection, welding, or painting. Clean surfaces make it easier to find cracks and wear, improving repair quality on truck and equipment components.
Building a Blasting Workflow
Stage parts on a cart beside the cabinet, grouped by size and finish requirements. Blast in batches, then move clean parts to a separate area for blow-off and inspection. Keep spare nozzles, gloves, window protectors, and filters nearby. An organized flow keeps the PSBC990 working at its full potential and minimizes downtime between parts.
Pressurized vs. Siphon Cabinets at a Glance
Siphon cabinets are simple and work well for light to moderate cleaning. They draw media into the gun using the air stream, which limits how much force reaches the part. Pressurized cabinets like the PSBC990 push media from a pressure tank, delivering more media at higher velocity. That means faster stripping of heavy rust and coatings, and more parts finished per hour. The trade-off is a higher air requirement and a bit more attention to moisture control. For shops that blast heavily every day, the speed advantage of the PSBC990 is usually well worth it.
Whether you’re running a high-volume powder coating line, restoring rusty classics, or cleaning heavy equipment parts, the PSBC990 brings pressurized power, an extra-large work area, and operator-friendly features together in one cabinet. Contact our team at Ironside Garage with questions about compressors, media, or delivery, and we’ll help you get started.
It is a cabinet built to keep up with demanding shops and to help every operator work faster, cleaner, and more comfortably.
Frequently Asked Questions About the PSBC990
What makes it pressurized?
A pressure tank below the hopper delivers an adjustable, high-pressure flow of abrasive to the gun.
How big is the work area?
46 inches wide, 34 inches deep, and 33.5 inches high.
How much weight can it hold inside?
Up to 220 lbs.
What air supply is needed?
24 CFM at 125 PSI.
Does it include lighting and a bench?
Yes, a built-in LED light and a standing bench.
What media is recommended?
Glass bead (not included).
Support From Ironside Garage
Our team can help you confirm air requirements, choose media, and arrange freight delivery of the PSBC990. Contact us with any questions.
Order the PSBC990 Today
The Atlas PSBC990 is a proven, powerful pressurized sandblast cabinet. Learn more on the official Atlas Automotive Equipment website, or browse our car lifts.
Related products
Atlas SBC1200 X-Large Sandblast Cabinet
Atlas SBC1200 X-Large Sandblast Cabinet with Dual Doors & Vacuum The Atlas SBC1200 sandblast cabinet takes many of the already great features of the Atlas® SBC990 blasting cabinet and doubles them. The SBC1200 sandblast cabinet has two, front and rear, extra large top open loading doors and features
Atlas SBC990 Large Sandblast Cabinet with Vacuum
Atlas SBC990 Large Sandblast Cabinet with Vacuum The Atlas SBC990 sandblast cabinet has many of the same features of the entry level Atlas® SBC420 blasting cabinet with added interior space and an extra large front/top loading door. That extra work space and larger opening allow the user to blast ev
Flo-Dynamics TS410 ATF Inline Exchanger
Flo-Dynamics TSD450LCD ATF Inline and Dipstick Exchanger w/ Chemical Injection
Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System
Mahle FluidPRO ATX-3 and Boost Transmission Fluid Exchange System FluidPRO equipment from MAHLE Service Solutions offers a range of choices in fluid exchange equipment. The ATX+Boost offers technicians fully-automatic operation with precise fluid measurement to maximize efficiency. The added feature
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft Meet the Portacool APEX™ 1200—a game-changer for mid-sized spaces demanding serious cooling. Delivering a powerful 4,000 CFMs of airflow that spans up to 40 ft., this unit ensures consistent comfort across 1,2

Reviews
There are no reviews yet.