Atlas SBC1200 X-Large Sandblast Cabinet
$4,449.00
Atlas SBC1200 X-Large Sandblast Cabinet with Dual Doors & Vacuum The Atlas SBC1200 sandblast cabinet takes many of the already great features of the Atlas® SBC990 blasting cabinet and doubles them. The SBC1200 sandblast cabinet has two, front and rear, extra large top open loading doors and features
The Atlas SBC1200 is an extra-large, dual-station sandblast cabinet with a 46 x 51 x 33.5-inch work area, two blast guns, two foot pedals, and extra-large front and rear top-opening doors. With an attached vacuum dust collector, the SBC1200 lets two operators work from opposite sides or one operator handle very large parts.
Atlas SBC1200 X-Large Sandblast Cabinet with Dual Doors & Vacuum
Features and Benefits
Extra Large Media Blasting Cabinet
Work area: 46” x 51” x 33 1/2”
Two Foot operated control valves
Two Heavy Duty blasting guns with replaceable ceramic nozzles
Self-contained dust collection system with cartridge filter and convenient bottom gate clean-out
Front and Rear Extra Large Top-Open Loading Doors
Extra nozzles and plastic protectors included
110V Power
Recommended media – Glass Bead (NOT INCLUDED)
Replacement Parts & Wear Items Always in Stock
This part number FREIGHT PREPAID
Atlas SBC1200 Sandblast Cabinet Specifications
Work Area: 46″ W x 51″ D x 33 1/2″ H
Overall Dimensions: 60″ W x 55″ D x 72 1/2″ H
Window Dimensions: 12 3/4″ x 27 1/4″
Gloves: 24″ Gauntlet
Power guns: Two NE490 Foot Pedals w/ Gun
Vacuum: Attached
Electric Requirement: 110volt
Air Requirement: 24 cfm/125 PSI (External Air Supply Required)
Shipping Weight: 700 lbs
SBC1200 Specifications
- Work area: 46″ W x 51″ D x 33.5″ H
- Overall dimensions: 60″ W x 55″ D x 72.5″ H
- Viewing windows: 12 3/4″ x 27 1/4″
- Gloves: 24-inch gauntlet
- Power guns: two NE490 guns with foot pedals
- Vacuum: attached
- Electrical: 110V
- Air requirement: 24 CFM at 125 PSI (external air supply required)
- Shipping weight: 700 lbs.
SBC1200 Features
- Extra-large work area
- Two foot-operated control valves
- Two heavy-duty blast guns with replaceable ceramic nozzles
- Front and rear extra-large top-opening loading doors
- Self-contained dust collection with cartridge filter
- Bottom gate clean-out
- Extra nozzles and plastic window protectors included
- Recommended media: glass bead (not included)
Two Stations in One Cabinet
The SBC1200 is set up for work from both sides. Each side has its own gun and foot pedal, so two operators can blast from opposite sides of the cabinet, or one operator can move around a large part to reach every surface. In a busy shop, that dual setup can increase output and make it easier to handle long or awkward parts.
Extra-Large Work Area
At 46 inches wide, 51 inches deep, and 33.5 inches high, the SBC1200 has room for big components such as wheels, larger brackets, frame sections, and housings. The deep interior lets you reach parts from either side without straining.
Front and Rear Loading Doors
Extra-large top-opening doors on the front and rear make loading and unloading large items easier. You can load from whichever side is more convenient, or pass long parts through the cabinet.
Clean, Contained Blasting
An attached vacuum with a cartridge filter removes fine dust and broken-down media, keeping visibility clear and the shop cleaner. A bottom gate clean-out makes it simple to remove spent media.
Who Should Buy the SBC1200
- High-volume powder coating shops
- Restoration shops handling large parts
- Wheel refinishing businesses
- Fabrication and welding shops
- Truck, trailer, and equipment repair shops
- Industrial maintenance departments
Explore more tools in our shop equipment section.
How to Use the SBC1200
- Connect an air supply capable of 24 CFM at 125 PSI.
- Plug in the vacuum (110V) and turn it on.
- Add glass bead or other suitable media.
- Load the part through the front or rear top-opening door and close it.
- Use the gloves at either station and press the foot pedal to blast.
- Move the gun in smooth, overlapping passes and rotate the part as needed.
- Let the vacuum clear the dust before opening the door to unload.
Air Supply for Two Guns
The SBC1200 lists an air requirement of 24 CFM at 125 PSI. If you plan to run both guns at the same time, make sure your compressor system can supply enough air for simultaneous use, or plan to run one station at a time. Our team can help you evaluate your compressor and air lines before you order. A dryer or water separator helps keep media dry and flowing.
Safety Guidelines
Keep both doors closed while blasting, use the gloves at all times, and run the vacuum during operation. Wear eye protection when loading and unloading. Make sure both operators communicate clearly when working at the same time. Dispose of spent media and dust according to local regulations.


Maintenance Tips
- Replace window protectors on both sides as they cloud.
- Check and replace worn nozzles on both guns.
- Clean or replace the cartridge filter regularly.
- Inspect both sets of gloves and replace when worn.
- Use the bottom gate to remove spent media.
- Keep your air system dry.
SBC1200 vs. Single-Station Cabinets
Single-station cabinets like the Atlas SBC990 work well for most shops. The SBC1200 adds a deeper work area, a second gun and pedal, and doors on both sides. If your shop handles very large parts or wants two operators blasting at once, the SBC1200 offers more capacity and flexibility.
Boosting Throughput
For production shops, throughput is everything. With two blast stations, the SBC1200 can let two operators clean parts at the same time, roughly doubling the work a single-station cabinet could handle, as long as your air supply supports both guns. Even with one operator, the dual setup saves time by letting them work from whichever side gives the best access to a large part, instead of repeatedly repositioning it.
Handling Long and Awkward Parts
Long parts like frame sections, axles, or tubing can be difficult to blast in a single-sided cabinet. The SBC1200’s 51-inch depth and front and rear doors make it easier to load these items and reach their full length. Operators can work from both ends to clean every surface evenly.
Wheel Refinishing
The large interior and top-opening doors make the SBC1200 a practical choice for wheel refinishers. Load wheels from either side, blast the face and barrel from opposite stations, and get complete coverage without awkward reaching. Mask bead seats and center bores before blasting, and clean wheels thoroughly afterward.
Powder Coating Prep
Powder coat needs clean, profiled surfaces. High-volume coaters can use the SBC1200 to prep large batches of parts quickly, keeping their coating line and ovens busy. Dual stations help keep up with demand during peak periods.
Restoration Projects
Restorers working on larger components, like suspension assemblies, brackets, and housings, benefit from the roomy interior and dual access. Parts come out clean and ready for refinishing, and the vacuum keeps the cabinet clear so you can see your progress.
Blasting Technique Tips
Hold the nozzle a few inches from the surface, keep it moving, and overlap passes for an even finish. Avoid lingering on thin metal to prevent warping. Rotate parts to reach all sides, and when two people work together, coordinate so neither is blasting toward the other’s gloves or window.
Planning Your Space
The SBC1200 measures 60 inches wide, 55 inches deep, and 72.5 inches tall. Because you can load and work from both the front and rear, plan for clearance on both sides of the cabinet. Choose a level location with access to 110V power and an air line that can deliver the required volume. Good lighting around the cabinet helps when staging and inspecting parts.
Keeping Media Dry
Moisture causes media to clump and clog guns. Install a dryer or water separator, drain your compressor daily, and store media in a dry place. Replace damp media rather than trying to use it.


Dust Control
The attached vacuum with a cartridge filter pulls fine dust and broken-down media out of the cabinet, keeping the windows clear and reducing dust in the shop. Clean or replace the filter regularly to maintain airflow, especially when both stations are in heavy use.
What Users Appreciate
Users often highlight the dual stations and the front and rear doors as the SBC1200’s standout features. Being able to work from either side makes large parts much easier to handle, and having two guns can significantly increase output. The generous interior and attached vacuum round out a cabinet built for serious production work.
A Typical Production Day
At a busy coating shop, the SBC1200 handles a steady flow of parts. In the morning, an operator checks the media level, drains the air system, and turns on the vacuum. Two technicians take positions at the front and rear stations. One works on a set of wheels while the other strips brackets and small frame sections. Parts are loaded through whichever door is closest, and the deep cabinet gives both technicians room to work. By the end of the day, the shop has prepped far more parts than a single-station cabinet would allow, keeping the coating line on schedule.
Truck and Trailer Components
Truck and trailer shops deal with rusty brackets, hangers, axle components, and mounts. The SBC1200’s large interior and dual access make these parts easier to clean thoroughly. Clean parts are easier to inspect for cracks, weld properly, and paint for long-lasting corrosion protection.
Industrial Maintenance
Maintenance teams cleaning large fixtures, housings, and equipment parts benefit from the SBC1200’s capacity. Removing rust and old paint helps extend equipment life and prepares parts for repair or recoating.
Protecting Sensitive Surfaces
Mask machined faces, bearing bores, threads, and sealing surfaces before blasting. After blasting, clean parts carefully to remove media from passages and threads. Careful preparation ensures parts function properly after refinishing.
Replacing Wear Items
With two stations, the SBC1200 has two sets of gloves, two guns, and two windows to maintain. Keep spare nozzles, gloves, window protectors, and filters on hand so you can swap them quickly. Atlas keeps replacement parts and wear items in stock.
Investing in Capacity
As a shop grows, its blasting needs often grow faster than expected. A cabinet that seemed big enough at first can become a bottleneck. The SBC1200 gives you room to grow with an extra-large interior, dual stations, and two loading doors. Investing in a cabinet of this size can prevent future bottlenecks and help your shop take on bigger jobs and more customers without delays.
Sizing Your Compressor and Air Lines
Air supply is the most important factor in blasting performance. Confirm that your compressor can deliver the SBC1200’s listed 24 CFM at 125 PSI continuously, and add capacity if you plan to run both guns at once. Use air lines and fittings large enough to avoid pressure drops over the run from the compressor to the cabinet. A properly sized air system keeps media flowing smoothly and ensures consistent results.
Choosing Nozzle Sizes
Each gun uses replaceable ceramic nozzles. Larger nozzles cover more area but use more air; smaller nozzles offer precision and lower consumption. Choosing nozzle sizes that match your air supply, especially when both guns run together, helps maintain strong pressure at each station.


Organizing Your Blasting Area
Set up staging areas on both sides of the SBC1200: one for dirty parts and one for clean parts. Keep spare wear items, masking supplies, and a blow gun nearby. With an organized layout, both operators can work efficiently without getting in each other’s way.
Getting Started
If your shop needs extra-large, dual-station blasting capacity, the SBC1200 is an excellent choice. Contact our team to review your air system, choose media, and arrange freight delivery.
Training Operators
Before putting the SBC1200 into service, walk each operator through loading and unloading through both doors, using the foot pedals, adjusting technique for different materials, and replacing wear items. When two operators work at the same time, set simple rules for communication, such as announcing when a door will be opened or when a large part will be rotated. Clear habits keep the work safe and efficient.
Better Finishes, Happier Customers
The quality of a paint or powder coat finish depends heavily on surface preparation. The SBC1200 lets you clean large parts thoroughly and consistently, which improves adhesion and durability. Customers notice the difference in long-lasting finishes, and fewer comebacks mean more time for new work.
Fabrication Shops
Fabricators can use the SBC1200 to remove mill scale and rust from large weldments, brackets, and frames before finishing. Clean steel accepts paint and powder coat better and produces stronger welds. The dual stations let fabricators blast big assemblies from both sides without repositioning them repeatedly.
Keeping the Cabinet Ready
At the end of each day, let the vacuum run briefly to clear dust, empty spent media if needed, and check gloves and window protectors. Wipe down the exterior and keep the area around both doors clear. A clean, ready cabinet makes the next day’s work faster and safer.
Why Dual Doors Matter
Loading a heavy or long part into a cabinet from only one side can be awkward. You may need to lift it high, angle it in, or reach across the interior to position it. The SBC1200’s front and rear top-opening doors solve that. Load long parts from either end, position them easily, and access them from both sides during blasting. That flexibility reduces strain on operators, lowers the risk of dropping parts, and makes it easier to blast every surface evenly. For shops that regularly handle bulky items, dual doors can make a dramatic difference in daily workflow.
From wheels and frames to housings and brackets, the SBC1200 gives your shop the space, access, and output to handle large blasting jobs efficiently. Contact our team at Ironside Garage with questions about air supply, media, or delivery, and we’ll help you get set up quickly.
Shops that move up to the SBC1200 often say it changed how they schedule blasting work. Instead of waiting for a single station to free up, two technicians can work at once, and large jobs no longer require awkward workarounds. That added capacity helps shops take on more customers, meet tight deadlines, and deliver consistent results on every part.
It is a serious production cabinet for shops that are ready to grow their blasting capacity with confidence.
Frequently Asked Questions About the SBC1200
How big is the work area?
46 inches wide, 51 inches deep, and 33.5 inches high.
Does it have two blast stations?
Yes, with two guns and two foot pedals.
How are parts loaded?
Through extra-large top-opening doors on the front and rear.
What air supply does it need?
24 CFM at 125 PSI from an external compressor. Plan additional capacity if running both guns at once.
Does it include a vacuum?
Yes, an attached vacuum with a cartridge filter.
What media is recommended?
Glass bead (not included).
Support From Ironside Garage
Our team can help you evaluate your air supply, choose media, and arrange freight delivery of the SBC1200. Contact us with any questions.
Order the SBC1200 Today
The Atlas SBC1200 is a proven, powerful X-large dual-station sandblast cabinet. Learn more on the official Atlas Automotive Equipment website, or explore our car lifts.
Related products
Atlas SBC990 Large Sandblast Cabinet with Vacuum
Atlas SBC990 Large Sandblast Cabinet with Vacuum The Atlas SBC990 sandblast cabinet has many of the same features of the entry level Atlas® SBC420 blasting cabinet with added interior space and an extra large front/top loading door. That extra work space and larger opening allow the user to blast ev
BendPak Bender
BendPak Bender heavy-duty “Blue-Bullet” exhaust pipe bender. This high-quality bender takes off like a shot and helps you reach your production target every time. Your purchase of the BB-2 comes complete with a die package and a dual-function end-finishing unit for precision OE expansions and flares
Cool Boss CB-28L Portable Evaporative Air Cooler
Cool Boss CB-28L Portable Evaporative Air Cooler The CB-28 is a medium-duty commercial-grade cooler that is well-suited for large industrial space cooling. When temperatures rise and you’re looking for a cost-effective cooling solution, look no further than Cool Boss. The CB-28 evaporative cooler pu
Ranger RP 20FC oil filter crusher
Ranger RP 20FC oil filter crusher is capable of applying 10 tons of force to virtually any used oil filter or can. With it you can easily reduce filters to 20% – 25% of their original size, as well as remove up to 95% of the oil. The RP-20FC includes an integrated collection chamber, collector downs

Reviews
There are no reviews yet.