Dannmar D4-12A 12,000-lbs. Capacity Alignment Four-Post Lift / Includes Slip Plates and Turnplates

$8,284.00

Dannmar’s 12,000 lb. capacity alignment lift is two lifts in one. That’s because it works as an alignment system and a car lift. Dannmar’s utilized industrial-strength slip plates and turn plates into the runways to provide optimal results. With this, the wheels respond to every adjustment with effe

SKU: IRG0210 Categories: ,
Description

Looking for a reliable alignment lift? The Dannmar D4-12A delivers the durability, safety and ease of use that busy service bays demand. This page covers the Dannmar D4-12A features, specifications, installation planning and care so you can buy with confidence.

Dannmar D4-12A Features and Specifications

Features

  • 12,000 pound lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Heavy-duty turn plates and integrated rear slip-plates
  • Multi-position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal “Anti-Sway” slider blocks in each column
  • Oversize sheaves and heavy-duty 1/2” aircraft cable
  • Rugged 1-3/8” roller axles and oversize self-lubricating cable sheaves
  • Multi-position safety locks in each column with push-button safety release
  • Runways adjust for different tread widths and feature non-skid surface
  • Optional 6,000-lb. capacity bridge jacks available

Specs

SKU# 5175318
Lifting Capacity 12,000 lbs. (5,443 kg)
A – Min. Runway Height 9.5″ (243 mm)
B – Max. Rise 68.75″ (1,746 mm)
C – Max. Lifting Height 79.5″ (2,019 mm)
D – Ramp Clearance* (Max. Rise) 49″ (1,245 mm)
E – Height of Columns 92″ (2,337 mm)
F – Drive-Thru Clearance 98” (2,482 mm)
G – Overall Width 127.5″ (3,239 mm)
H – Width Between Columns 115.75″ (2,940 mm)
I – Overall Length 233.5″ (2,940 mm)
J – Outside Columns 115.75″ (2,940 mm)
K – Width Between Runways 34.5″ (876 mm) or 41.5″ (1,054 mm)
L – Runway Centerline 54.5″ (1,384 mm) or 61.5″ (1,562 mm)
M – Outside Edge of Runways 74.5″ (1,892 mm) or 81.5″ (2,070 mm)
N – Runway Width 20″ (508 mm)
O – Length of Runways 194.75″ (4,947 mm)
Min. 4-Wheel Alignment 106” (2,692 mm)
Max. 4-Wheel Alignment 158.5” (4,026 mm)
Max. 2-Wheel Alignment 163.5” (4,153 mm)
Min. Wheelbase @ Rated Capacity 140” (3,556 mm)
Min. Wheelbase @ 75% Capacity 120” (3,048 mm)
Min. Wheelbase @ 50% Capacity 100” (2,540 mm)
Min. Wheelbase @ 25% Capacity 80” (2,032 mm)
Locking Positions 15 (spaced every 4” / 102 mm)
Time to Full Rise 60 seconds
Motor 220 VAC / 60 Hz / 1 Ph

* Approach ramps can be removed.

Dannmar D4-12A Photos

Dannmar D4-12A alignment liftDannmar D4-12A alignment lift view 2Dannmar D4-12A alignment lift view 3Dannmar D4-12A alignment lift view 4

Key Highlights of the Dannmar D4-12A

Here is a quick summary of what stands out on this alignment lift:

  • 12,000 pound lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Heavy-duty turn plates and integrated rear slip-plates
  • Multi-position turn plate pockets
  • Automatic leveling system

Why Shops Choose the Dannmar D4-12A

c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`

Benefits of a Quality Alignment Lift

Investing in the right alignment lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the Dannmar D4-12A

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the Dannmar D4-12A

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the Dannmar D4-12A from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Alignment Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right alignment lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Dannmar website.

Dannmar D4-12A FAQs

Do I need special concrete for the Dannmar D4-12A?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Dannmar D4-12A or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the alignment lift correctly, which protects your investment and your technicians.

How is the Dannmar D4-12A shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Dannmar D4-12A come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Alignment Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Dannmar D4-12A is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a alignment lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Dannmar D4-12A 12,000-lbs. Capacity Alignment Four-Post Lift / Includes Slip Plates and Turnplates”

Your email address will not be published. Required fields are marked *

Shipping & Delivery