HDSO14P
$11,995.00
BendPak’s HDSO14P is capable of handling 14,000 lbs. This open-front four-post car lift allows for easy entry and exit beneath a vehicle. This lift is available with optional drive-through ramps, drip trays, and rolling jacks.
The HDSO14P Four Post Lift brings proven design and solid construction to your shop. Read on for detailed specifications of the HDSO14P Four Post Lift, practical setup guidance and the answers to questions our customers ask most often.
HDSO14P Four Post Lift Features and Specifications
Open-Front Capability in a Powerful Four-Post Lift
The HDSO14P is an open-front four-post lift that features clear entry upfront and provides easy vehicle access. With its impressive 14,000 lb. lifting capacity and extended runways, you’ll be able to service a wide variety of vehicles, ranging from small cars to full-size trucks.
Open-front design
BendPak has engineered the HDSO14P without a front cross bar, so operators will be able to easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. If you work in busy alignment bays, you can’t do much better than the HDSO14P.
Patented, adjustable front outrigger tubes
BendPak’s outrigger tubes provide precise front-lift leveling. The infinitely adjustable pitch compensates for excessive loads and unlevel floors.
Dependable design
The HDSO14P is equipped with four heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway which make this lift one of the sturdiest, maintenance-free lifting systems you could find on the market.
Oversize dual-hub cable sheaves
There are 10.5” diameter cable sheaves within the runway and cross tubes work with 2.25” diameter sheave axles to improve cable wear and critical component lifespan. The dual-hub cable sheaves reduce stress, fatigue, and wear. This will work towards saving you a lot of money that would normally be spent on service-related expenses down the road.
Multi-level locking positions
This lift features multiple adjustable height locking positions for variable-height parking. With its convenient push-button pneumatic safety lock, you’ll be able to release all four independent safety locks at the same time.
Heavy-duty aircraft cable
Each lift is supplied with four high-quality ½” diameter, 6 x 25 stainless steel lifting cables which are rated at 14,400 lbs. each. Combined, these cables have a rating which is more than 411% of the maximum lifting capacity of the entire lift. The aircraft-quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue. All cables are fully enclosed within the lift structure itself. This increases safety by keeping the cables from being damaged from outside forces, and also has the lift retain its attractive look.
Maintenance-free electric hydraulic
BendPak uses a maintenance-free electric hydraulic power system which ensures that you’ll be working with the ultimate in dependability.
Grease nipples
There are grease nipples which are located on every sheave and sheave axle which will keep everything nice and lubricated.
Electric / hydraulic power system
BendPak has incorporated maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.
Large base plates
The HDSO14P receives a solid foundation due to its 12” x 10” base plates.
Longer approach ramps
BendPak has expertly designed their ramps to be a little longer to help when loading low ground-clearance vehicles. This little design feature ends up making a huge difference.
Integrated design
Lifting cables, airlines, safety latches and sheaves are all fully enclosed.
Integrated hydraulic flow
An integrated hydraulic flow restrictor provides a controlled descent in the extremely unlikely event of an unexpected hose rupture.
Automatic safety locks
The HDSO14P includes aircraft-quality stainless steel and aluminum pneumatic cylinders which release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks will automatically engage continuously as the lift is raised. For additional safety, a secondary lock system is in place which will act as a slack-cable device to engage in the unlikely event of cable failure.
Optional 7,000-lb. capacity rolling jacks
To get the most out of your lift, we at Wrenchers also offer BendPak’s RJ7W, their 7,000 lb. capacity rolling bridge jack. They sit along the inner edges of each runway, and then engage the lift points and quickly lift the wheels off the ramps. This optional jack is an essential tool for anyone who wants to get the most out of their four-post lift.
Features
- 14,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Huge cable sheaves reduce wear and tear
- Extremely convenient open-front design for easy access
- Extended runway length for servicing
- Longer approach ramps for low ground clearance vehicles
- Electric / hydraulic power system
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Automatic leveling system with multiple auto-leveling locking positions
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2″ aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Rugged, self-lubricating cable sheaves
- Features 1-3/8” sheave axles
- Multi-position safety locks in each column
- Independent backup slack-cable safety latches
- Includes fully adjustable lock stops for precise leveling
- Integrated rolling bridge airline kit option available
- Roll-back kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
Specs

| SKU# | 5175152 |
|---|---|
| Lifting Capacity | 14,000 lbs. (6,350 kg) |
| *Max Capacity / Front Axle | 7,000 lbs. (3,175 kg) |
| *Max Capacity / Rear Axle | 7,000 lbs. (3,175 kg) |
| A – Min. Runway Height | 7.625″ (194 mm) |
| B – Max. Rise | 70″ (1,778 mm) |
| C – Max. Lifting Height | 77.625″ (1,972 mm) |
| D – Overall Width (FRONT) | 143” (3,632 mm) |
| E – Overall Width (REAR) | 130” (3,301 mm) |
| F – Outside Length | 215.5″ (5,473 mm) |
| G – Overall Length | 244″ (6,198 mm) |
| H – Height of Columns (FRONT) | 105″ (2,664 mm) |
| I – Height of Columns (REAR) | 103” (2,613 mm) |
| J – Width Between Columns (FRONT) | 123” (3,124 mm) |
| K – Width Between Columns (REAR) | 120” (3,046 mm) |
| L – Drive-Thru Clearance | 97” (2,464 mm) |
| M – Runway Width | 20″ (508 mm) |
| N – Length of Runways | 199″ (5,054 mm) |
| O – Width Between Runways | 45″ (1,143 mm) |
| P – Runway Centerline | 65″ (1,651 mm) |
| Q – Outside Edge of Runways | 85″ (2,159 mm) |
| Rated Capacity | 140″ (3,556 mm) |
| 75% Capacity | 120″ (3,048 mm) |
| 50% Capacity | 100″ (2,540 mm) |
| 25% Capacity | 80″ (2,032 mm) |
| Locking Positions | 13 |
| Lock Spacing | Every 4″ (102 mm) |
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Noise | 45 dB |
| Shipping Weight | 3,238-lbs. (1,468.7 kg) |
| Dimensions | 218” x 22” x 50” (5,537 mm x 558 mm x 1,282 mm) |
| Time to Full Rise | 60 seconds |
HDSO14P Four Post Lift Photos




HDSO14P Four Post Lift at a Glance
- The HDSO14P Four Post Lift is built for daily professional use.
- The HDSO14P Four Post Lift is backed by manufacturer support and documentation.
- Our team can confirm shipping options for the HDSO14P Four Post Lift to your location.
- The HDSO14P Four Post Lift is a smart fit for shops upgrading their equipment.
- Every HDSO14P Four Post Lift order includes help from our product specialists.
Key Highlights of the HDSO14P Four Post Lift
Here is a quick summary of what stands out on this four post lift:
- The HDSO14P receives a solid foundation due to its 12” x 10” base plates.
- Lifting cables, airlines, safety latches and sheaves are all fully enclosed.
- 14,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Huge cable sheaves reduce wear and tear
Why Shops Choose the HDSO14P Four Post Lift
c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`
Benefits of a Quality Four Post Lift
Investing in the right four post lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.
Common Uses for the HDSO14P Four Post Lift
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the HDSO14P Four Post Lift
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the HDSO14P Four Post Lift from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right four post lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the Automotive Lift Institute (ALI).
HDSO14P Four Post Lift FAQs
Do I need special concrete for the HDSO14P Four Post Lift?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the HDSO14P Four Post Lift or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the four post lift correctly, which protects your investment and your technicians.
How is the HDSO14P Four Post Lift shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the HDSO14P Four Post Lift come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety
BendPak MD-6XP Car Lift
BendPak MDS-6EXTF 6,000-lb Mid-Rise Scissors Lift
BendPak MDS-6EXTF 6,000-lb Mid-Rise Scissors Lift You haven’t experienced state-of-the-art portable lifting convenience until you’ve used a BendPak mid-rise scissor lift. This family of 6,000-lb. capacity car lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock posi
BendPak P-9000LTF Car Lift
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take

Reviews
There are no reviews yet.