Atlas 414 Commercial Grade 14,000 lb. 4-Post Lift

$7,749.00

The Atlas® 414 14,000 pound capacity heavy duty four post lift is designed and built to commercial grade standards and will provide many years of service. Our Atlas® lifts offer many exclusive features not found on many other competitor’s lifts. The Atlas® 414 incorporates many structural and cosmet

SKU: IRG0128 Categories: ,
Description

The Atlas 414 is a professional-grade four post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the Atlas 414, along with setup tips, maintenance advice and answers to common questions.

Atlas 414 Features and Specifications

Features and Benefits:

  • 14,000 lb. Capacity
  • Heavy Duty, Commercial Grade
  • Extra Tall, Extra Wide & Extra LongV
  • Diamond Plated Runways
  • Air Operated Single Point Lock Release (External Air Supply Required – NOT INCLUDED)
  • Lock Ladder Design
  • Double Lock Safety System
  • Powder Coat Finish
  • Steel Approach Ramps Included
  • Additional Drive off Ramps Available (Sold Separately)
  • Runway Extensions Available (Sold Separately)
  • Mounting Hardware Included
  • 220volt/1phase Electric Operation (Requires a 30amp Breaker)
  • Shipping Weight: 3,100 lbs.
  • 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only
  • This part number FREIGHT PREPAID

Atlas® ATTD-414 Specifications

  • Capacity 14,000 lb.
  • Lifting Height 80″ (6′ 8″)
  • Overall Width Of Columns (Without Motor) 130 7/8″ (10′ 10 7/8″)
  • Overall Width Of Columns (With Motor) 138 7/8″ (11′ 6 7/8″)
  • Overall Length With Approach Ramp 255″ (21′ 3″)
  • Length Between Columns 197 1/4″ (16′ 5 1/4″)
  • Runway Length 208 5/8″ (17′ 4 5/8″)
  • Runway Width 20″
  • Thickness Of Runway 8 3/4″
  • Width Between Runways 46 7/8″ (w/ Rail 44 3/8″)
  • Outside Runway To Outside Runway 86 7/8″ (7′ 2 7/8″)
  • Clearance Under Runways 71 1/4″ (5′ 11 1/4″)
  • Clearance Between Columns 116″ (9′ 8″)
  • Height Of Columns 91 1/8″ (7′ 7 1/8″)
  • Maximum Wheel Base 197″ (16′ 5″)
  • Drive Thru 102 1/8″ (8′ 6 1/8″)
  • Air Requirement 85-115 PSI (EXTERNAL AIR SUPPLY REQUIRED)
  • Motor/Electrical Requirement 220 volt single (1) phase (A 30 amp breaker is recommended)
  • Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)
  • Shipping Weight 3,100 LBS.
  • Requires a minimum of 6″ of concrete with a 3000 psi. rating

Atlas 414 Photos

Atlas 414 four post liftAtlas 414 four post lift view 2Atlas 414 four post lift view 3Atlas 414 four post lift view 4

Key Highlights of the Atlas 414

Here is a quick summary of what stands out on this four post lift:

  • Features and Benefits:
  • 14,000 lb. Capacity
  • Heavy Duty, Commercial Grade
  • Extra Tall, Extra Wide & Extra LongV
  • Diamond Plated Runways

Why Shops Choose the Atlas 414

c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`

Benefits of a Quality Four Post Lift

Investing in the right four post lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the Atlas 414

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the Atlas 414

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the Atlas 414 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Four Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right four post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Atlas website.

Atlas 414 FAQs

Do I need special concrete for the Atlas 414?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Atlas 414 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the four post lift correctly, which protects your investment and your technicians.

How is the Atlas 414 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Atlas 414 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Four Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Atlas 414 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a four post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Getting the Most from Your Four Post Lift

A few simple habits make a big difference in how long equipment lasts. Keep the work area clean, store accessories where technicians can find them, and log maintenance so nothing gets missed. Shops that treat their four post lift as a long-term investment see better uptime and lower operating costs year after year.

Training matters too. Walk every new team member through safe operation of the Atlas 414, review the manual together, and post key safety reminders near the equipment. A short refresher every few months keeps good habits in place.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Atlas 414 Commercial Grade 14,000 lb. 4-Post Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery