BendPak XPR-12FDL Car Lift-12,000 Lb. Capacity, ALI Certified Floorplate, Direct-Drive

$10,295.00

The XPR-12FDL is your car hoist. This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that’s ahead of its time and a 12,000 pound lifting capacity. An open-top model, the XPR-12FDL makes unobstructed floor-to-ceiling application

SKU: IRG0075 Categories: ,
Description

The BendPak XPR-12FDL is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the BendPak XPR-12FDL, along with setup tips, maintenance advice and answers to common questions.

BendPak XPR-12FDL Features and Specifications

  • 12,000-lb lifting capacity
  • Open-top eliminates overhead obstruction
  • Wide drive-thru configuration
  • Single-piece columns
  • Single-point safety release
  • Oversized 53″ tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Self-lubricating dura-glide UHMW polyethylene carriage bearings
  • Safety locks in each column spaced every 3″
  • Automatic arm restraints
  • Heavy-duty 1/2″ aircraft-quality equalizer cables
  • Oversized 6” diameter steel cable sheaves reduce cable fatigue
  • Versatile drop-in contact pads with stackable 8-piece truck and van adapters
  • Frame cradle pads come standard
  • Triple-telescoping, low-profile arms
  • ETL approved
  • Lifting capacity*:12,000 lbs. / 5,443 kg
    • *Max capacity / front axle: 6,000 lbs. / 2,722 kg
    • *Max capacity / rear axle: 6,000 lbs. / 2,722 kg
  • Overall height: 144″ / 3,403 mm
  • Overall width (outside of base plate): 155″ / 3,937 mm
  • Width (outside of columns): 146″ / 3,708 mm
  • Cover height: 2″ / 51 mm
  • Inside columns: 118″ / 2,997 mm
  • Front arm min reach: 39″ / 991 mm
  • Front arm max reach: 59″ / 1,499 mm
  • Rear arm min reach: 39″ / 991 mm
  • Rear arm max reach: 59″ / 1,499 mm
  • Min. Pad Height: 5″ / 127 mm
  • Rise: 69″ / 1,753 mm
  • Lift height max (pad only): 74″ / 1,880 mm
  • Lift height max (6″ adapter): 80″ / 2,032 mm
  • Drive-thru clearance: 103″ / 2,616 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 55 sec
  • Max load per arm: 3,000 lbs. / 1,361 kg
  • Shipping weight: 2,458 lbs. / 1,117 kg
  • Shipping dimensions: 151″ x 29″ x 54″ / 3,835 mm x 737 mm x 1,372 mm

* CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493. Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.

Our newest line of XPR-Series 2 Post car hoists offers a wide selection of durable, safe and reliable systems for virtually every lifting application. Specifically, the powerful and secure super-duty XPR-12FDL is an incredibly rapid car hoist with a robust menu of features to increase efficiency and productivity, without overwhelming you with serviceable parts and necessary maintenance. The results are lower operating expenses and higher productivity. If you’re looking to make more money in less time than ever before, you’ll find that the new XPR-12FDL vehicle hoist is the perfect addition to your car servicing shop— especially when you work with heavier vehicles that require larger lifting capacities.

 

But just because this super-duty model was designed for the big stuff doesn’t mean it can’t handle your light-duty work as well. The two post car hoist XPR-12FDL easily has the capacity to lift your largest full-sized pickups and commercial vehicles, yet still provide specific capability for sport and compact cars, both foreign and domestic. The 2 post car hoist XPR-12FDL is a 12,000-lb.

maximum capacity, close-top model hoist with full-reach arms that collapse to standard lengths and lower hoist pads that clutch standard passenger automobiles, yet still hold the big guys as well. The columns are also placed wider for trucks with fixed towing mirrors. Sound complicated to operate? Don’t worry. When it comes to ease of use, our dual-synchro equalization system and user-friendly controls are the stuff of legends.

The “D” in XPR-12FDL stands for the dual “direct-drive” low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system. This exclusive BendPak design feature saves you maintenance costs throughout the life of your hoist—you aren’t going to find friendly sensibility like this anywhere else. Some more BendPak XPR-Series exclusives include: 16 individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 6″ cable sheaves. And, to better cater to your specific lifting needs, we offer similar model car lifts with optional specialty arm configurations.

The entire XPR-Series is a reflection of BendPak’s continuing commitment to producing lifts of only the highest quality, maximum safety and utmost reliability. Featuring the most advanced engineered technology available in the industry, these lifts are built to safety standards well above normal OSHA/ALI/ETL requirements. The XPR-Series hoists include a wealth of standard and optional features to support the operator’s need for performance and security. Combined with BendPak’s tradition of durable, reliable construction, the XPR-Series has become the new industry benchmark that others are sure to follow.

Whatever your requirements, there’s a BendPak XPR-Series 2 Post car hoist designed to meet your needs. The XPR-Series offers an abundant roster of options and accessories that allow you to fully tailor your lifting equipment to your unique circumstance. But long before you start looking at options, you’ll be impressed with the long list of standard features and capabilities packed into every BendPak XPR-Series truck hoist.

Bottom line—when you buy BendPak, you can expect a significant boost in performance and life expectancy. In fact, your BendPak XPR-12FDL might be the last hydraulic hoist you ever purchase. No one surpasses us in quality and safety. Not now, not ever. When you get a BendPak, you get more than just a fantastic hoist. You get peace of mind. That’s the BendPak benefit.

Getting the right car hoist for your application is easy with the help of your local BendPak dealer or by investigating the customer focused product materials found on our website.

Every XPR-12FDL comes with:

Direct-Drive two-post car hoist technology

BendPak two-post car hoists feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on othercar hoist designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and less maintenance costs throughout the life of your lift. High-volume, low-pressure equates to less workload placed on the entire hydraulic system.

Direct-Drive technology is preferred on commercial-grade two post car lifts as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurized hydraulic fluid flows from the power-unit, through the hollow cylinder rods then enters the cylinder body and fills the inside cavity. The pressure of the hydraulic fluid extends the piston rod downward raising the cylinder body and lift carriages. A dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Triple-telescoping arm set
Three-stage front and three-stage rear arms provide maximum reach, as well as minimum retraction. Use this super-duty lift system for raising standard passenger vehicles and light-duty trucks.
16-Piece Adapter Set / Standard
Others might charge extra for these necessary adapters, but they’re standard with every XPR-Series heavy-duty model. Multi-piece set includes four 6″ stackable adapters, four 3″ stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks.
Lowered arm tube supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.

Automatic arm restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Taller lift carriages
Take a close look at our lift carriages (the lifting assembly that the arms are attached to) and then take a look at the competition. You’ll notice our 53″ tall carriages are considerably taller than most, which minimizes the stress placed on the load bearings and columns.

Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.

Single-piece columns
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Dual direct-drive technology By utilizing two, low-pressure HVLP direct-drive cylinders, we’ve eliminated the need for lifting chains or screw mechanisms most commonly found on other lift designs. HVLP direct-drive technology offers better reliability, smoother operation and less maintenance. High-volume, low-pressure equates to less workload placed on the entire hydraulic system.

Single-point safety release
The single point safety release and “dead man” style operation controls makes every one of our XPR-Series lifts easy to operate and safe to use.

On the level

Our dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Industrial-grade hydraulic cylinders

Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. 001″ diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection.

The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.

High-speed hydraulics
Free-flow, high-pressure 3/8″ hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.

Durable powder-coat finish

All XPR-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25′ long.

Once cleaned, they’re immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder.

After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun.

The powder “sticks” to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

Detailed instructions
Included with every lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.

BendPak XPR-12FDL Photos

BendPak XPR-12FDL two post liftBendPak XPR-12FDL two post lift view 2BendPak XPR-12FDL two post lift view 3BendPak XPR-12FDL two post lift view 4

BendPak XPR-12FDL at a Glance

  • The BendPak XPR-12FDL is built for daily professional use.
  • The BendPak XPR-12FDL is backed by manufacturer support and documentation.
  • Our team can confirm shipping options for the BendPak XPR-12FDL to your location.
  • The BendPak XPR-12FDL is a smart fit for shops upgrading their equipment.
  • Every BendPak XPR-12FDL order includes help from our product specialists.
  • The BendPak XPR-12FDL combines solid construction with simple operation.
  • Ask us about accessories that pair well with the BendPak XPR-12FDL.
  • The BendPak XPR-12FDL helps your team work faster and more safely.
  • Compare the BendPak XPR-12FDL with similar two post lift models in our catalog.
  • Request a freight quote for the BendPak XPR-12FDL at any time.
  • The BendPak XPR-12FDL is a dependable long-term investment for your shop.
  • Questions about the BendPak XPR-12FDL? Contact our team for quick answers.

Key Highlights of the BendPak XPR-12FDL

Here is a quick summary of what stands out on this two post lift:

  • 12,000-lb lifting capacity
  • Open-top eliminates overhead obstruction
  • Wide drive-thru configuration
  • Single-piece columns
  • Single-point safety release

Why Shops Choose the BendPak XPR-12FDL

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Two Post Lift

Investing in the right two post lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the BendPak XPR-12FDL

c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`

Installation and Setup

c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`

Safety and Maintenance Tips for the BendPak XPR-12FDL

c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`

Buy the BendPak XPR-12FDL from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak XPR-12FDL FAQs

Do I need special concrete for the BendPak XPR-12FDL?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak XPR-12FDL or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the BendPak XPR-12FDL shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak XPR-12FDL come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak XPR-12FDL Car Lift-12,000 Lb. Capacity, ALI Certified Floorplate, Direct-Drive”

Your email address will not be published. Required fields are marked *

Shipping & Delivery