Challenger SA10 10,000 lb. ALI Certified Symmetric / Asymmetric Two-Post Lift

$5,708.00

Challenger’s SA10 2-post lift offers 10,000 lb. capacity. You can install the SA10 in either symmetric or asymmetric position, depending on your service needs. The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage

SKU: IRG0042 Categories: ,
Description

The Challenger SA10 is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the Challenger SA10, along with setup tips, maintenance advice and answers to common questions.

Challenger SA10 Features and Specifications

  • 10,000 lb. lift capacity
  • 3-stage front arms provide greater sweep for versatility and ease of spotting
  • Can be installed in either symmetric or asymmetric position, depending on your service needs
  • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
  • Adjustable heights and widths provide versatility at installation for service facilities with special constraints
  • Single-point mechanical lock release system allows technician to disengage both columns simultaneously
  • Padded overhead shut off system prevents vehicle damage
  • Premium powder coat finish provides long-lasting durability
  • Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
  • Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
Model Number SA10 SA10
Lifting Capacity 10,000 lbs. 10,000 lbs.
Lifting Configuration Symmetric Asymmetric
Arms 3-stage front/2-stage rear 3-stage front/2-stage rear
Rise Height 74.5” 74.5”
Overall Height 136.5” / 142.5” 136.5” / 142.5”
Overall Height (Cylinder Extended) 142.5” 142.5”
2’ Height Extension Available Yes Yes
Overall Width 129” / 135” 131.5” / 137.5”
Drive-Thru Clearance 92.75” / 98.75” 88.5” / 94.5”
Floor to Overhead Switch 131.125” / 137.125” 131.125” / 137.125”
Front Arm Reach 22.375” / 41.5” 22.375” / 41.5”
Rear Arm Reach 38.25” / 59” 38.25” / 59”
Screw Pad Height 4.75” / 6.875” 4.75” / 6.875”
Inside Columns 106.75” / 112.75” 101.5” / 107.5”
Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph 2HP, 208v-230v, 60Hz, 1Ph
Speed of Rise 43 s 43 s
Ceiling Height Required 12’ 12’
ALI/ETL Certified Yes Yes
Colors Available Red, Blue Red, Blue

Challenger SA10 Photos

Challenger SA10 two post lift

Key Highlights of the Challenger SA10

Here is a quick summary of what stands out on this two post lift:

  • 10,000 lb. lift capacity
  • 3-stage front arms provide greater sweep for versatility and ease of spotting
  • Can be installed in either symmetric or asymmetric position, depending on your service needs
  • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
  • Single-point mechanical lock release system allows technician to disengage both columns simultaneously

Why Shops Choose the Challenger SA10

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Two Post Lift

The best two post lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.

Common Uses for the Challenger SA10

c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`

Installation and Setup

c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`

Safety and Maintenance Tips for the Challenger SA10

c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`

Buy the Challenger SA10 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Challenger website.

Challenger SA10 FAQs

Do I need special concrete for the Challenger SA10?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Challenger SA10 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the Challenger SA10 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Challenger SA10 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Two Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Challenger SA10 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Challenger SA10 10,000 lb. ALI Certified Symmetric / Asymmetric Two-Post Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery