Challenger SA10 10,000 lb. ALI Certified Symmetric / Asymmetric Two-Post Lift
$5,708.00
Challenger’s SA10 2-post lift offers 10,000 lb. capacity. You can install the SA10 in either symmetric or asymmetric position, depending on your service needs. The SA10 also features adjustable height and width options to further customize it to meet your needs. Innovative 3-stage front and 2-stage
The Challenger SA10 is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the Challenger SA10, along with setup tips, maintenance advice and answers to common questions.
Challenger SA10 Features and Specifications
- 10,000 lb. lift capacity
- 3-stage front arms provide greater sweep for versatility and ease of spotting
- Can be installed in either symmetric or asymmetric position, depending on your service needs
- Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
- Adjustable heights and widths provide versatility at installation for service facilities with special constraints
- Single-point mechanical lock release system allows technician to disengage both columns simultaneously
- Padded overhead shut off system prevents vehicle damage
- Premium powder coat finish provides long-lasting durability
- Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
- Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
| Model Number | SA10 | SA10 |
|---|---|---|
| Lifting Capacity | 10,000 lbs. | 10,000 lbs. |
| Lifting Configuration | Symmetric | Asymmetric |
| Arms | 3-stage front/2-stage rear | 3-stage front/2-stage rear |
| Rise Height | 74.5” | 74.5” |
| Overall Height | 136.5” / 142.5” | 136.5” / 142.5” |
| Overall Height (Cylinder Extended) | 142.5” | 142.5” |
| 2’ Height Extension Available | Yes | Yes |
| Overall Width | 129” / 135” | 131.5” / 137.5” |
| Drive-Thru Clearance | 92.75” / 98.75” | 88.5” / 94.5” |
| Floor to Overhead Switch | 131.125” / 137.125” | 131.125” / 137.125” |
| Front Arm Reach | 22.375” / 41.5” | 22.375” / 41.5” |
| Rear Arm Reach | 38.25” / 59” | 38.25” / 59” |
| Screw Pad Height | 4.75” / 6.875” | 4.75” / 6.875” |
| Inside Columns | 106.75” / 112.75” | 101.5” / 107.5” |
| Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph | 2HP, 208v-230v, 60Hz, 1Ph |
| Speed of Rise | 43 s | 43 s |
| Ceiling Height Required | 12’ | 12’ |
| ALI/ETL Certified | Yes | Yes |
| Colors Available | Red, Blue | Red, Blue |
Challenger SA10 Photos

Key Highlights of the Challenger SA10
Here is a quick summary of what stands out on this two post lift:
- 10,000 lb. lift capacity
- 3-stage front arms provide greater sweep for versatility and ease of spotting
- Can be installed in either symmetric or asymmetric position, depending on your service needs
- Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
- Single-point mechanical lock release system allows technician to disengage both columns simultaneously
Why Shops Choose the Challenger SA10
c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`
Benefits of a Quality Two Post Lift
The best two post lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the Challenger SA10
c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`
Installation and Setup
c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`
Safety and Maintenance Tips for the Challenger SA10
c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`
Buy the Challenger SA10 from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the official Challenger website.
Challenger SA10 FAQs
Do I need special concrete for the Challenger SA10?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Challenger SA10 or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.
How is the Challenger SA10 shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Challenger SA10 come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Choosing the Right Two Post Lift
When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Challenger SA10 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.
It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.
What to Expect After You Order
After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.
Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.
Related products
BendPak LR-10000 10000 lb Capacity Low-Rise Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety
BendPak MDS-6EXTF 6,000-lb Mid-Rise Scissors Lift
BendPak MDS-6EXTF 6,000-lb Mid-Rise Scissors Lift You haven’t experienced state-of-the-art portable lifting convenience until you’ve used a BendPak mid-rise scissor lift. This family of 6,000-lb. capacity car lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock posi
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift We’re not just talking a big game; we’re offering the first open-center mid-rise lift ever made. Decades of experience have taught us a thing or two about vehicle lift points. A car lift with longer platforms means you get to lift more vehicle t
BendPak P-9000LTF Car Lift
Challenger DX77 7700 lb ALI Certified Scissor Lift
Challenger DX77 7700 lb ALI Certified Scissor Lift Looking for a scissor lift that can easily handle many makes and models while ensuring maximum productivity and safety? Look no further than the DX77. With a robust 7,700 lbs. capacity and a synchronized hydraulic system, this lift can handle many v
Dannmar DLR-6P Car Lift
Dannmar DLR-6P Car Lift The DLR-6P is a high-quality low-rise lift from Dannmar that helps you move along on wheels! Its high-density roller wheels are the secret to how the DLR-6P is such a convenient portable low-rise lift. With a mobile lift you’ll gain the ability to easily relocate your lift wi

Reviews
There are no reviews yet.