Launch TLT240SC-R 9000 lb 2 Post Clear Floor Asymmetric
$3,345.00
The Launch TLT240SC-R is a 9,000 lb clear floor two post lift with asymmetric arms, adjustable column width for narrow bays, 3-stage front arms, a 73″ max rise, and dual point lock release.
The Launch TLT240SC-R is a 9,000 lb clear floor two post lift with asymmetric arms and an adjustable column width that lets you custom fit the lift to narrower service bays. With a 73″ maximum rise, 4″ minimum pad height, and 3-stage front arms, it handles everything from low sedans to SUVs and light trucks.
Launch TLT240SC-R Overview
The Launch TLT240SC-R runs its hydraulic and equalization lines overhead, leaving a completely open floor between the columns for jacks, drain pans, and creepers. Chain drive and a dual point lock release, which lets technicians disengage both column locks independently, keep daily operation simple.
Double telescoping screw pads offer 2.5″ of adjustment, and four stackable 3.5″ foot pad extensions help you reach high frame points. Rubber door guards and hose guards protect vehicles and hydraulic lines, while a heavy-duty arm restraint system uses oversize steel gears, pins, and springs.
Clear Floor Asymmetric Design with Adjustable Width
Asymmetric arms place the vehicle slightly rearward between the columns, giving extra room to open the front doors while keeping the load balanced.
The columns can be installed in a standard or rotated asymmetric orientation, and the adjustable column width provides an extra 6″ of adjustment, so you can fit the lift to bays that are tighter than average.
Key Features of the Launch TLT240SC-R
- 9,000 lb lifting capacity (2,250 lbs per arm)
- Clear floor design
- Chain drive
- Adjustable column width with an extra 6″ of adjustment for narrow bays
- Standard or rotated asymmetric column installation
- 3-stage front arms
- Rubber door guards and hose guards
- Four stackable 3.5″ foot pad extensions
- Dual point lock release
- Heavy-duty arm restraint system
- Double telescoping screw pads with 2.5″ adjustment
Launch TLT240SC-R Specifications
| Model | Launch TLT240SC-R |
| Lifting capacity | 9,000 lbs (2,250 lbs per arm) |
| Lift type | 2 post, clear floor |
| Max lift height | 73″ |
| Min pad height | 4″ |
| Overall height | 151″ |
| Overall width (with power unit) | 140″ asymmetric / 134″ symmetric |
| Width between columns | 108″ |
| Drive-thru clearance | 95″ asymmetric / 98″ symmetric |
| Short arm reach | 23-5/8″ – 43-1/2″ |
| Long arm reach | 34″ – 54″ |
| Power | 208–230V, 60Hz, single phase |
Specifications may change; confirm current specifications and warranty terms with our team before installation.
Before You Buy: Installation Checklist
A two post lift is only as safe as the floor and space it is installed in. Before ordering, check these points against the manufacturer’s installation manual:
- Ceiling height: make sure your ceiling clears the lift’s overall column height plus the height of the tallest vehicle you plan to raise
- Concrete: confirm your slab meets the minimum thickness and strength required for anchoring
- Bay width: allow room for the overall lift width plus space to open doors and move around the columns
- Power: the Launch TLT240SC-R requires a 208–230V, 60Hz, single-phase circuit installed by a licensed electrician
Professional installation by a qualified lift installer is recommended. For lift safety standards and certified product listings, visit the Automotive Lift Institute (ALI).
Who Is the Launch TLT240SC-R For?
- Repair shops with narrower service bays
- Dealership and fleet service departments
- Home garages with high ceilings
- Technicians who want an open floor and good door clearance
Launch TLT240SC-R FAQ
How much ceiling height does the Launch TLT240SC-R need?
The overall height is about 151″. Add clearance for the roof of any vehicle you plan to raise to full height.
Can I adjust it for a narrow bay?
Yes. The adjustable column width gives an extra 6″ of adjustment to custom fit your shop.
What power does it need?
A 208–230V, 60Hz, single-phase electrical supply.
Shop More Car Lifts
Compare more two post lifts, or explore four post lifts, scissor lifts, and lift combo packages in our full car lifts collection. Have questions about the Launch TLT240SC-R, installation, or freight delivery? Contact Ironside Garage and our team will help you choose the right lift.
Related products
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
BendPak MDS-6LP Car Lift
BendPak MDS-6LP Car Lift The MDS-6LP sports an open-center design which makes it one of the best options in terms of convenience and work productivity. This lift can handle vehicles weighing up to 6,000 lbs. BendPak has crafted this lift for home garages, full-service shops, quick-lube pits, and rea
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take

Reviews
There are no reviews yet.