Tuxedo TP9KACX 9,000 lb 2 Post Asymmetric Clear Floor Car Lift
$2,750.00
The Tuxedo TP9KACX is a 9,000 lb asymmetric clear floor two post lift with a 72″ max rise, 96″ drive-thru clearance, chain drive cylinders, dual point lock release, and automatic arm restraints.
The Tuxedo TP9KACX is a 9,000 lb asymmetric clear floor two post lift designed for professional shops and serious home garages. With a 72″ maximum rise, 96″ drive-thru clearance, and a low 4″ minimum pad height, it lifts everything from low sports cars to SUVs and half-ton pickups.
Tuxedo TP9KACX Overview
The Tuxedo TP9KACX uses chain drive cylinders and single piece columns with a durable powder coat finish. Its clear floor design runs the hydraulic and equalization lines overhead, leaving the floor between the columns open for jacks, oil drains, and creepers.
A front-side mounted power unit reduces overall width, while internal hose routing, integrated hose guards, and rubber door guards protect both the lift and your customers’ vehicles.
Why an Asymmetric 2 Post Lift?
An asymmetric two post lift uses shorter front arms and longer rear arms, and the columns are rotated slightly. This positions the vehicle further back between the columns, so the center of gravity sits correctly while leaving more room to open the front doors without hitting a column.
That door clearance is a big advantage for everyday cars, SUVs, and light trucks, because technicians can get in and out of the vehicle while it is on the lift.
Key Features of the Tuxedo TP9KACX
- 9,000 lbs. lifting capacity (2,250 lbs per arm)
- Asymmetric / clear floor design
- Chain drive cylinders
- Dual point lock release
- Automatic arm restraint system
- Saddle pad adapters included (1 pair)
- Single piece column construction with powder coat finish
- Padded shut-off bar with kill switch
- Low profile drop-in swivel pads with 1-1/2″ adjustable height
- Four each stackable 1-3/8″ and 4″ drop-in height adapters
- Reduced overall width with front-side mounted power unit
- Internal hose routing with integrated hose guards and rubber door guards
Tuxedo TP9KACX Specifications
| Model | Tuxedo TP9KACX |
| Lifting capacity | 9,000 lbs (2,250 lbs per arm) |
| Max rise | 72″ |
| Min pad height | 4″ |
| Overall height | 142-7/8″ |
| Overall width (with power unit) | 138″ |
| Width between columns | 113-5/8″ |
| Drive-thru clearance | 96″ |
| Front arm reach | 29″ – 41″ |
| Rear arm reach | 37″ – 57″ |
| Lifting time | Approx. 50 seconds |
| Power | 220V, 20 amp, single phase |
Important: not for use with diesel trucks (3/4 ton diesel or larger). Because of the weight placed on the front arms, we recommend a 10,000 or 11,000 lb two post lift for those vehicles. Specifications may change; confirm with our team before installation.
Before You Buy: Installation Checklist
A two post lift is only as safe as the floor and space it is installed in. Before ordering, check these points against the manufacturer’s installation manual:
- Ceiling height: make sure your ceiling clears the lift’s overall column height plus the height of the tallest vehicle you plan to raise
- Concrete: confirm your slab meets the minimum thickness and strength required for anchoring
- Bay width: allow room for the overall lift width plus space to open doors and move around the columns
- Power: the Tuxedo TP9KACX requires a 220V, 20 amp, single-phase circuit installed by a licensed electrician
Professional installation by a qualified lift installer is recommended. For lift safety standards and certified product listings, visit the Automotive Lift Institute (ALI).
Who Is the Tuxedo TP9KACX For?
- Independent repair and maintenance shops
- Dealership and fleet service bays
- Home garages with enough ceiling height
- Enthusiasts working on cars, SUVs, and half-ton trucks
Tuxedo TP9KACX FAQ
What ceiling height do I need for the Tuxedo TP9KACX?
The lift is about 142-7/8″ tall overall, so plan for at least that plus clearance for any vehicle you raise to full height.
Can it lift a 3/4 ton diesel truck?
No. For 3/4 ton and larger diesel trucks, choose a 10,000 or 11,000 lb two post lift.
What is the difference between the TP9KACX and a symmetric lift?
The TP9KACX uses asymmetric arms for better door clearance. A symmetric lift centers the vehicle between the columns.
Shop More Car Lifts
Compare more two post lifts, or explore four post lifts, scissor lifts, and lift combo packages in our full car lifts collection. Have questions about the Tuxedo TP9KACX, installation, or freight delivery? Contact Ironside Garage and our team will help you choose the right lift.
Related products
BendPak LR-60P Car Lift
BendPak MD-6XP Car Lift
BendPak P-9000LTF Car Lift
Forward Lift 6000MRL 6000 lbs Capacity Mid-Rise Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.