Tuxedo GA9KACX 9,000 lb 2 Post Asymmetric Clear Floor Car Lift
$2,500.00
The Tuxedo GA9KACX is a 9,000 lb asymmetric clear floor two post car lift with chain drive cylinders, dual point lock release, automatic arm restraints, and low profile drop-in swivel pads.
The Tuxedo GA9KACX is a 9,000 lb asymmetric, clear floor two post car lift built for home garages, hobby shops, and light commercial service bays. It combines chain drive cylinders, single piece columns, and a reduced overall width with a front-side mounted power unit, giving you a strong, space-conscious lift for cars, SUVs, and light trucks.
Tuxedo GA9KACX Overview
With 9,000 lbs of lifting capacity, the Tuxedo GA9KACX handles most passenger cars, crossovers, SUVs, and half-ton pickups. The clear floor design routes the hydraulic and equalization lines overhead, so there is no floor plate between the columns. That leaves an open, flat floor for rolling jacks, oil drains, creepers, and tool carts.
Internal hose routing with integrated hose guards keeps hydraulic lines protected, and rubber door guards on the columns help prevent dings when doors are opened next to the lift.
Asymmetric Clear Floor Design
An asymmetric two post lift uses shorter front arms and longer rear arms, and the columns are rotated slightly. This positions the vehicle further back between the columns, so the center of gravity sits correctly while leaving more room to open the front doors without hitting a column.
That door clearance is a big advantage for everyday cars, SUVs, and light trucks, because technicians and owners can get in and out of the vehicle while it is on the lift.
Key Features of the Tuxedo GA9KACX
- 9,000 lbs. lifting capacity
- Asymmetric / clear floor design
- Chain drive cylinders
- Dual point lock release
- Automatic arm restraint system
- Saddle pad adapters included (1 pair)
- Single piece column construction with powder coat finish
- Padded shut-off bar with kill switch
- Low profile drop-in swivel pads with 1-1/2″ adjustable height
- Four each stackable 1-3/8″ and 4″ drop-in height adapters
- Reduced overall width with front-side mounted power unit
- Internal hose routing with integrated hose guards
- Rubber door guards
Tuxedo GA9KACX Specifications
| Model | Tuxedo GA9KACX |
| Lifting capacity | 9,000 lbs |
| Lift type | 2 post, asymmetric |
| Floor | Clear floor (overhead) |
| Drive | Chain drive cylinders |
| Lock release | Dual point |
| Pads | Low profile drop-in swivel pads, 1-1/2″ adjustment |
| Adapters | 1-3/8″ and 4″ stackable height adapters, saddle pad adapters |
Important: not for use with diesel trucks (3/4 ton diesel or larger). Because of the weight placed on the front lifting arms, we recommend a 10,000 or 11,000 lb two post lift for those vehicles.
Before You Buy: Installation Checklist
A two post lift is only as safe as the floor and space it is installed in. Before ordering, check these points against the manufacturer’s installation manual:
- Ceiling height: make sure your ceiling clears the lift’s overall column height plus the height of the tallest vehicle you plan to raise
- Concrete: confirm your slab meets the minimum thickness and strength required for anchoring
- Bay width: allow room for the overall lift width plus space to open doors and move around the columns
- Power: confirm the power unit voltage and circuit requirements with our team before installation
Professional installation by a qualified lift installer is recommended. For lift safety standards and certified product listings, visit the Automotive Lift Institute (ALI).
Who Is the Tuxedo GA9KACX For?
- Home garage owners and car enthusiasts
- Hobby and restoration shops
- Light commercial repair bays
- Shops servicing cars, SUVs, and half-ton trucks
Tuxedo GA9KACX FAQ
Can the Tuxedo GA9KACX lift a diesel pickup?
It is not recommended for 3/4 ton or larger diesel trucks. For those, choose a 10,000 or 11,000 lb two post lift.
Why choose asymmetric over symmetric?
Asymmetric arms place the vehicle further back, giving more front door clearance. Symmetric lifts center the vehicle and suit longer trucks and vans.
What adapters are included?
A pair of saddle pad adapters plus stackable 1-3/8″ and 4″ drop-in height adapters for reaching higher frame points.
Shop More Car Lifts
Compare more two post lifts, or explore four post lifts, scissor lifts, and lift combo packages in our full car lifts collection. Have questions about the Tuxedo GA9KACX, installation, or freight delivery? Contact Ironside Garage and our team will help you choose the right lift.
Related products
BendPak MDS-6LP Car Lift
BendPak MDS-6LP Car Lift The MDS-6LP sports an open-center design which makes it one of the best options in terms of convenience and work productivity. This lift can handle vehicles weighing up to 6,000 lbs. BendPak has crafted this lift for home garages, full-service shops, quick-lube pits, and rea
BendPak MDS-6LPF Car Lift
BendPak P-9000LT Car Lift
BendPak SP-7XE Car Lift
BendPak SP-7XE Car Lift The SP-7XE is a space-saving, frame engaging lift from BendPak. This high-quality lift features no cross members at all, meaning installation is easier than ever. This lift can easily accommodate most passenger vehicles as well as light trucks, and it comes loaded with pneuma
Dannmar DLR-6P Car Lift
Dannmar DLR-6P Car Lift The DLR-6P is a high-quality low-rise lift from Dannmar that helps you move along on wheels! Its high-density roller wheels are the secret to how the DLR-6P is such a convenient portable low-rise lift. With a mobile lift you’ll gain the ability to easily relocate your lift wi
Rotary RLP77 7700 lb ALI Certified Low Profile Double Scissor Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.