Mahle CTJ-2200 ShopPRO Commercial Transmission Jack

$3,824.00

Mahle CTJ-2200 ShopPRO Commercial Transmission Jack

SKU: IRG0538 Categories: ,
Description

The Mahle CTJ-2200 ShopPRO is a low-profile commercial transmission jack rated for 2,206 lbs. It starts at just 8 inches and lifts to 34 inches, making the CTJ-2200 ideal for removing heavy transmissions and components from vehicles at floor level, on low lifts, or where overhead clearance is limited.

Mahle CTJ-2200 ShopPRO 2,200 lb. Commercial Transmission Jack

FEATURES

Heavy duty casters stand up to rigorous shop use

Large head plate accommodates a variety of different sized components

Our transmission and component lifts save time and provide maximum safety for any technician

Forward, rear, and side tilt adjustments

Four adjustable quick ratcheting brackets

Manual/Hydraulic powered

Air assist options available

Optional adapters available

Product Specifications

Capacity 2,206 lb (1,001 kg)

Minimum Start Height 8 in (20 cm)

Maximum Lift Height 34 in (86 cm)

Power Manual/Hydraulic or Air/Hydraulic

Required Air Pressure 90 to 200 psi (6.2 to 13.8 bar)

Power (Ram) Travel 26 in (66 cm)

Head Plate Dimension 11.5 in x 17 in (29 cm x 43 cm)

Tilt (Forward / Rear / Side to Side) 10°

Dimensions (W x L) 28.3 in x 44.5 in (72 cm x 113 cm)

Handle Length 24.3 in (62 cm)

Caster Diameter 4 in (10 cm)

Shipping Weight 305 lb (138 kg)

CTJ-2200 Specifications

  • Capacity: 2,206 lbs.
  • Minimum start height: 8 inches
  • Maximum lift height: 34 inches
  • Ram travel: 26 inches
  • Power: manual/hydraulic, or air/hydraulic with air assist option
  • Air pressure (air assist): 90 to 200 psi
  • Head plate: 11.5 x 17 inches
  • Tilt: 10° forward, rear, and side to side
  • Dimensions (W x L): 28.3 x 44.5 inches
  • Handle length: 24.3 inches; caster diameter: 4 inches
  • Shipping weight: 305 lbs.

Low Profile for Floor-Level Work

Not every shop works on vehicles raised high on lifts. Many heavy-duty and commercial vehicles are serviced at floor level, on low lifts, or over shallow clearances. The CTJ-2200 starts at just 8 inches, so it slides under trucks and equipment that taller jacks can’t reach. With 26 inches of ram travel, it lifts to 34 inches, covering a practical working range for floor-level transmission work.

Large Head Plate

An 11.5 x 17-inch head plate supports a variety of component sizes, from heavy-duty transmissions to transfer cases and differentials. Four adjustable quick-ratcheting brackets help secure the load to the head plate quickly and firmly.

Forward, Rear, and Side Tilt

The CTJ-2200 tilts 10° forward, rearward, and side to side. That adjustability helps you match the angle of the component during removal and installation, making alignment much easier.

Manual or Air-Assisted Hydraulics

Out of the box, the CTJ-2200 works as a manual/hydraulic jack. Air assist options are available for shops that want faster lifting, using air pressure between 90 and 200 psi. That flexibility lets you choose the setup that best fits your shop.

Heavy-Duty Casters

Heavy-duty casters stand up to rigorous shop use and make it easy to position the jack under the vehicle. A 24.3-inch handle gives you leverage for steering in tight spaces.

Who Should Buy the CTJ-2200

  • Heavy-duty truck and fleet shops working at floor level
  • Shops servicing vehicles with low ground clearance
  • Agricultural and construction equipment repair
  • Bus and transit maintenance
  • Shops without full-height lifts for heavy vehicles

Browse related tools in our shop equipment section.

How to Use the CTJ-2200

  1. Secure the vehicle and confirm it’s stable.
  2. Roll the CTJ-2200 under the transmission and center the head plate.
  3. Raise the head plate using the hydraulic pump or air assist.
  4. Adjust tilt to match the component’s angle.
  5. Secure the load with the quick-ratcheting brackets.
  6. Remove fasteners per the service manual, then lower and roll the component clear.

Safety Guidelines

Never exceed the CTJ-2200’s 2,206 lb. capacity. Always secure the load before lowering or moving the jack. Keep the load low when rolling, keep people clear of the area, and use the jack on a hard, level floor. Follow Mahle’s operating instructions.

CTJ-2200 key specifications

CTJ-2200 vs. High-Lift Transmission Jacks

High-lift transmission jacks are designed for vehicles raised on full-height lifts, where technicians stand underneath. The CTJ-2200 is the opposite: a low-profile jack built for vehicles at floor level or on low lifts. If your shop services heavy vehicles without lifting them high, or you need to work under equipment with low clearance, the CTJ-2200 is the right fit. Many shops keep both types so they’re ready for any setup.

A Typical Floor-Level Transmission Job

With the vehicle secured, the technician disconnects the driveshaft, linkages, wiring, and cooler lines, and supports the engine as needed. The CTJ-2200 rolls under the transmission at its low 8-inch start height. The technician pumps the hydraulics, or uses the air assist, to bring the head plate up to the transmission, adjusts tilt to match the mounting angle, and secures the load with the ratcheting brackets. After the crossmember and bellhousing bolts come out, the transmission slides back and lowers smoothly. The jack then rolls the unit out for service. Installation follows the same steps in reverse.

Securing the Load

Four adjustable quick-ratcheting brackets make securing components fast. Position them around the transmission case, tighten, and the load is held firmly to the head plate. A secure load is essential when moving heavy components, especially across a busy shop floor.

Air Assist for Faster Work

For shops that handle frequent transmission jobs, the optional air assist can speed up lifting and reduce operator effort. Connect a compressed air supply between 90 and 200 psi, and the jack does more of the work for you. It’s a worthwhile upgrade for busy heavy-duty shops.

Maintenance Tips

  • Check hydraulic fluid levels and look for leaks.
  • Inspect ratcheting brackets and straps for wear.
  • Keep tilt mechanisms clean and lubricated.
  • Check casters for smooth rolling and secure mounting.
  • Wipe away fluids and grime after each job.

Supporting Other Components

The large head plate and secure brackets make the CTJ-2200 useful beyond transmissions. Use it to support transfer cases, differentials, PTO units, and other heavy drivetrain components within its rated capacity. Optional adapters are available to expand its versatility further.

Investing in Safety

Heavy components can cause serious injuries if they slip or fall. A purpose-built commercial transmission jack like the CTJ-2200 reduces that risk. It supports the load securely, lets you control movement precisely, and keeps technicians out of harm’s way. For any shop working on heavy vehicles, it’s an investment in safety as much as productivity.

Working on Equipment With Low Clearance

Agricultural machinery, construction equipment, and some commercial vehicles have drivetrains tucked close to the ground. Standard jacks may not fit underneath. The CTJ-2200’s 8-inch start height lets it slide into those tight spaces, then rise to meet the component. That makes it a valuable tool for equipment dealers, farm shops, and mobile service providers who regularly work on machines that can’t be lifted high.

Choosing the Right Capacity

Before lifting any component, confirm its weight, including attached parts such as torque converters, retarders, or PTOs. The CTJ-2200 handles up to 2,206 lbs., which covers many medium and heavy-duty transmissions and drivetrain components. For heavier units, consider a higher-capacity jack. Staying within the rated capacity is essential for safe operation.

Shop Safety Checklist

  • Inspect the jack before each use.
  • Confirm the component weight is within capacity.
  • Secure the load with the ratcheting brackets.
  • Keep the load as low as practical when rolling.
  • Keep hands and feet clear of the base and casters.
  • Never work under a component supported only by the jack.
  • Communicate clearly with your team during removal and installation.

CTJ-2200

CTJ-2200 power options

Why Mahle ShopPRO

Mahle’s ShopPRO line is built for the realities of professional shop work. The CTJ-2200 reflects that with heavy-duty casters, a large head plate, practical tilt adjustments, and the option of air-assisted lifting. It’s a dependable tool for shops that handle heavy drivetrain components regularly.

Storage and Care

When not in use, lower the head plate fully and store the CTJ-2200 in a clean, dry spot away from traffic. Keep the brackets and adapters together so they’re ready for the next job. Wipe down the jack after each use to keep moving parts clean and working smoothly.

Benefits for Fleet Operations

Fleet maintenance teams need tools that help them get vehicles back on the road quickly. The CTJ-2200 makes heavy transmission and drivetrain jobs safer and more efficient at floor level, without requiring a full-height lift for every vehicle. That flexibility can reduce bottlenecks in shops where lifts are in high demand. Technicians can tackle drivetrain work in any open space with a hard, level floor, freeing lifts for other jobs.

Benefits for Technicians

Removing a heavy transmission by hand, or with improvised equipment, is risky and exhausting. The CTJ-2200 takes the weight and lets technicians focus on careful alignment and fastener work. The ratcheting brackets save time when securing the load, the tilt adjustments reduce wrestling with awkward angles, and the heavy-duty casters make positioning easier. The result is less strain, fewer injuries, and better work.

Mobile and Field Service

For service providers who work on equipment in the field or at customer sites, a low-profile jack can be invaluable. The CTJ-2200 can be transported to locations where heavy machinery sits on the ground, allowing drivetrain work without bringing the equipment back to the shop. Always use the jack on a hard, level surface and follow safe work practices.

Pairing With Adapters

Optional adapters expand what the CTJ-2200 can handle. Specific adapters can help support certain transmission cases or components more securely. Ask our team which adapters fit the vehicles and equipment you work on most often, so you’re ready for every job.

A Tool That Pays for Itself

Safer, faster drivetrain jobs translate into lower costs and higher productivity. Fewer injuries mean less lost time. Faster jobs mean more vehicles serviced. Protecting expensive components from drops and damage avoids costly mistakes. For heavy-duty and fleet shops, the CTJ-2200 quickly proves its value.

Getting the Tilt and Height Right

When reinstalling a heavy transmission, alignment is everything. Start by raising the CTJ-2200 until the transmission is close to the engine, then use the tilt adjustments to match the engine’s angle front to back and side to side. Raise or lower in small increments until the input shaft lines up with the clutch or torque converter and the dowel pins align. Push the transmission forward gently; it should slide into place without force. If it binds, back off, recheck the angle, and try again. Patience and fine adjustments prevent damage to splines, seals, and clutch components.

Planning Your Workspace

Choose a clean, level area with good lighting for drivetrain work. Clear tools, cords, and debris from the path the jack will travel. Have drain pans, wheel chocks, and engine supports ready before you start. A well-planned workspace makes every step smoother and safer, and helps technicians complete the job efficiently.

CTJ-2200 best uses

Training Your Team

Make sure every technician who uses the CTJ-2200 understands its controls, tilt adjustments, and load-securing brackets. Walk through a practice lift with no load to build familiarity. Encourage the habit of inspecting the jack before each use and reporting any issues immediately. A trained team uses equipment more safely and gets better results.

What Technicians Appreciate

Technicians often highlight the CTJ-2200’s low start height and large head plate as its most useful features. Being able to slide under low equipment and support big components securely makes tough jobs far more manageable. The quick-ratcheting brackets and reliable hydraulics round out a jack that simply works when it’s needed.

Comparing Manual and Air-Assisted Operation

The standard manual/hydraulic operation of the CTJ-2200 gives technicians direct, precise control. Each pump raises the head plate a measured amount, which is helpful during careful alignment. For shops with frequent transmission work, the optional air assist reduces effort and speeds up the initial lift. Many shops find a mix works best: use air to bring the head plate up quickly, then fine-tune by hand. Whichever approach you choose, the CTJ-2200’s hydraulic system provides smooth, controlled motion.

Heavy-Duty Applications

The CTJ-2200 is well suited to a wide range of heavy-duty applications. In truck shops, it supports transmissions, transfer cases, and differentials. In bus garages, it helps with drivetrain service under low-floor vehicles. In agricultural shops, it supports components on tractors and combines. In construction equipment repair, it handles heavy drivetrain parts on machines that sit close to the ground. Its versatility makes it a valuable addition to many types of shops.

Long-Term Reliability

Built for rigorous shop use, the CTJ-2200 combines a sturdy frame, heavy-duty casters, and a dependable hydraulic system. With regular inspections and basic maintenance, it will serve your shop reliably for years. Keep the hydraulics topped up, the tilt mechanism clean, and the brackets in good condition, and the jack will be ready for every job.

Getting Started

If your shop handles heavy transmissions at floor level, the CTJ-2200 is a practical, dependable choice. Contact our team to confirm it suits your vehicles and equipment, ask about air assist and adapters, and arrange delivery so you’re ready for the next big drivetrain job.

Protecting Expensive Components

Heavy-duty transmissions and drivetrain components are expensive. A single drop can crack a case, damage a shaft, or bend a mounting surface, turning a routine job into a costly repair. The CTJ-2200 helps protect those components by supporting them securely on a large head plate with ratcheting brackets. Controlled hydraulic movement means no sudden drops or jerks. Careful handling during removal and installation protects your customers’ equipment and your shop’s reputation for quality work.

Every heavy component that leaves and returns to a vehicle on the CTJ-2200 is handled with the stability and control it deserves, which is exactly what professional technicians expect from their tools. It is a smart choice for shops that want to work safely, protect expensive parts, and keep heavy vehicles moving.

Whether your team handles a few heavy transmission jobs each month or several each week, the CTJ-2200 provides the low profile, strong support, and fine control needed to do the work safely and well. Our team is always ready to answer questions about adapters, air assist, and the best setup for your shop and equipment.

Contact us today to get the CTJ-2200 working in your shop.

From the first lift to the last, the CTJ-2200 gives technicians a stable, secure, and controlled way to handle heavy components close to the ground, which is exactly what floor-level drivetrain work demands in busy commercial shops.

Frequently Asked Questions About the CTJ-2200

What is the capacity?

2,206 lbs.

What is the lift range?

8 inches minimum to 34 inches maximum, with 26 inches of ram travel.

Is it manual or air powered?

It’s manual/hydraulic as standard, with air assist options available.

What air pressure does air assist need?

90 to 200 psi.

Can it tilt?

Yes, 10° forward, rear, and side to side.

Support From Ironside Garage

Our team can help you choose between low-profile and high-lift transmission jacks and confirm that the CTJ-2200 suits your vehicles. Contact us with any questions.

Order the CTJ-2200 Today

The Mahle CTJ-2200 ShopPRO is a proven, powerful low-profile commercial transmission jack. Learn more on the Mahle Aftermarket website, or explore our car lifts.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Mahle CTJ-2200 ShopPRO Commercial Transmission Jack”

Your email address will not be published. Required fields are marked *

Shipping & Delivery