Ranger RS-750DS

$13,975.00

Ranger RS-750DS The incredible RS-750DS is made out of rust-free stainless-steel and has a 1,000 lb. weight capacity that can hold some of the biggest car, truck, and SUV parts on the market. This stainless steel 53-gallon capacity spray wash cabinet can rapidly degrease dirty parts, including large

SKU: IRG0515 Categories: ,
Description

The Ranger RS-750DS is an extra-large, hot-wash spray cabinet built with heavy-duty stainless steel construction. Ranger designed the RS-750DS to clean car and truck components that are too big for smaller cabinets. It stands 78 inches tall, offers a 54-inch inside height, carries up to 1,000 lbs. on its 30-inch turntable, and blasts parts with a 70 GPM pump through 22 nozzles. The result is more parts cleaned in fewer cycles, with safe aqueous cleaning and no harsh solvents.

Below you will find the complete RS-750DS specifications, how the cabinet works, what fits inside, power and floor space needs, maintenance tips, and answers to common questions. If you are outfitting a service bay with shop equipment, this guide will help you decide if the Ranger RS-750DS is the right parts washer for your shop.

Ranger RS-750DS

Ranger’s Extra-Massive Hot Wash Stainless-Steel Spray Cabinet

The RS-50D was designed so well, there wasn’t much that needed to be changed. That’s why Ranger mainly designed the RS-750DS to be able to handle the car and truck components that were too big to fit in the previous cabinet. And with its larger enclosure, you’ll be able to get more parts cleaned in fewer cycles. This machine is truly a beast. It stands over 6’ tall and has that iconic look that you’ll want in your shop.

It goes without saying that the RS-750DS isn’t just a pretty face. It can hold twice the amount of weight as the RS-50D, and it features a longer spray system to accommodate the increased size. This means that a larger supply of bigger components can get just as clean as before. The only real difference is that you’ll be saving time by washing more at once.

Features

Heavy-duty stainless steel construction

Safe aqueous operation: No harsh chemicals

53 gallon tank

Dual water heaters for quick startup

Heated cabinet w/ adjustable thermostat

High-power spray jets clean parts fast

Automatic low water shutoff

Removable tank screen

Stainless oil skimmer

Removable parts tree

Powder coat finish

Stainless steel nozzles

Full opening octagonal door

Large drain pipe

Heavy-duty casters

Friction-drive turntable system

Neoprene-sealed wash cabinet

Contamination-proof interior welds

Gasket-free door

Small parts basket

Stainless steel handles

Free bucket and soap included

Overall height: 78″ (1,981 mm)

Inside height: 54″ (1,372 mm)

Inside width: 32″ (813 mm)

Turntable diameter: 30″ (762 mm)

Tank capacity: 53 gallons

Recommended floor space: 44″ x 43″ (1,118 mm x 1,092 mm)

Load capacity: 1,000 lbs. (454 kg)

Cycle timer: 0 – 60 min

Brass nozzles: 22

Steel construction: 12 Gauge / .109 thickness

Pump output: 70 psi @ 70 gpm

Motor: 1 HP / 220 VAC / 60 Hz / 1 Ph

Electric heater: 6 kW

Water temperature: 160° – 180° F (71° – 82° C)

Shipping weight: 704 lbs. (319 kg)

Shipping dimensions: 46” x 46” x 80” (1,168 mm x 1,168 mm x 2,032 mm)

Ranger RS-750DS Specifications

Here are the published specifications for the Ranger RS-750DS stainless spray wash cabinet:

  • Overall height: 78″ (1,981 mm)
  • Inside height: 54″ (1,372 mm)
  • Inside width: 32″ (813 mm)
  • Turntable diameter: 30″ (762 mm)
  • Tank capacity: 53 gallons
  • Recommended floor space: 44″ x 43″ (1,118 mm x 1,092 mm)
  • Load capacity: 1,000 lbs. (454 kg)
  • Cycle timer: 0-60 minutes
  • Nozzles: 22
  • Steel construction: 12 gauge / .109 thickness
  • Pump output: 70 psi at 70 gpm
  • Motor: 1 HP / 220 VAC / 60 Hz / 1 phase
  • Electric heater: 6 kW
  • Water temperature: 160°-180°F (71°-82°C)
  • Shipping weight: 704 lbs. (319 kg)
  • Shipping dimensions: 46″ x 46″ x 80″ (1,168 mm x 1,168 mm x 2,032 mm)

The RS-750DS ships with a free bucket and soap so you can start cleaning as soon as the cabinet is set up and connected.

What Makes the RS-750DS Different

Ranger built the RS-750DS on a proven design. The smaller Ranger cabinet worked so well that Ranger kept the same basic system and made it bigger. The RS-750DS can hold twice the weight of the smaller model, and it uses a longer spray system to match the taller chamber. Bigger components get just as clean as smaller ones, and you save time because you can wash more parts at once.

The biggest difference is the material. The RS-750DS uses heavy-duty stainless steel construction. Stainless steel resists rust and corrosion from hot water and detergent far better than ordinary painted steel. In a machine that runs heated, wet cycles every day, stainless construction helps the cabinet stay in good shape for years. The cabinet also uses contamination-proof interior welds and stainless steel handles and nozzles.

At over six feet tall, the RS-750DS has an imposing look that stands out in any shop. More important, its 54-inch inside height and 1,000-lb. capacity let you clean tall transmissions, diesel blocks, and large differentials that will not fit in a standard cabinet.

How the RS-750DS Spray Cabinet Works

The RS-750DS works like a heavy-duty dishwasher for parts. The 53-gallon tank holds water and a safe aqueous detergent. Dual water heaters with a combined 6 kW rating bring the solution to 160°-180°F. The dual-heater design gives you a quick startup, so the cabinet is ready to clean sooner at the beginning of the day.

When you start a cycle, the 1 HP motor drives a pump that delivers 70 gallons per minute at 70 psi. High-power spray jets aim hot solution at the parts from many angles. The friction-drive turntable rotates the load so every surface passes through the spray. Used solution drains back through a removable tank screen into the tank, where it is reheated and recirculated.

The cabinet itself is heated and has an adjustable thermostat. That helps keep the temperature steady during long cycles, which improves cleaning on heavy grease and carbon. Set the cycle timer anywhere from 0 to 60 minutes, and the machine stops when the time runs out.

An automatic low water shutoff protects the heaters and pump. If the solution level drops too low, the RS-750DS shuts down instead of running dry. A stainless oil skimmer removes floating oil from the tank so it does not get sprayed back onto clean parts, which also extends the life of your cleaning solution.

RS-750DS key specifications

Full List of RS-750DS Features

  • Heavy-duty stainless steel construction
  • Safe aqueous operation with no harsh chemicals
  • 53-gallon tank
  • Dual water heaters for quick startup
  • Heated cabinet with adjustable thermostat
  • High-power spray jets clean parts fast
  • Automatic low water shutoff
  • Removable tank screen
  • Stainless oil skimmer
  • Removable parts tree
  • Powder coat finish
  • Stainless steel nozzles
  • Full opening octagonal door
  • Large drain pipe
  • Heavy-duty casters
  • Friction-drive turntable system
  • Neoprene-sealed wash cabinet
  • Contamination-proof interior welds
  • Gasket-free door
  • Small parts basket
  • Stainless steel handles
  • Free bucket and soap included

What Fits in the RS-750DS

The wash chamber of the RS-750DS is 54 inches tall and 32 inches wide, with a 30-inch turntable rated for 1,000 lbs. That is enough room for large components that will not fit in a smaller cabinet, including:

  • Heavy truck transmission cases and bell housings
  • Diesel engine blocks and cylinder heads
  • Large differentials and axle housings
  • V8 blocks with heads and covers in the same load
  • Flywheels, clutch housings, and torque converters
  • Hydraulic pumps and equipment components
  • Racks of brackets, covers, and small parts

The removable parts tree lets you hang smaller items so spray reaches every side. The small parts basket holds loose bolts, lifters, and hardware. Using both, you can clean a large engine teardown in one cycle instead of several.

Before you order, measure your tallest and widest parts. Leave clearance between the part and the spray pipes so the turntable can turn freely. Keep the total load under 1,000 lbs., and center heavy parts on the turntable to keep the load balanced.

Loading and Door Design

The RS-750DS has a full opening octagonal door. A wide opening makes it easier to load heavy parts with an engine hoist or crane. The gasket-free door and neoprene-sealed wash cabinet keep hot spray inside the cabinet without a door gasket that wears out over time.

Heavy-duty casters make it possible to move the cabinet into position during installation or when you rearrange the shop. The large drain pipe speeds up draining the tank when it is time to change the solution.

Power, Floor Space, and Installation

The RS-750DS uses a 1 HP motor rated at 220 VAC, 60 Hz, single phase, plus a 6 kW electric heater. Have a licensed electrician confirm that your panel can supply the cabinet, install the proper circuit, and make the connection to meet local codes.

Ranger recommends a floor space of 44 inches by 43 inches. Add room in front for the full opening door and for loading with a hoist, and leave space behind and beside the cabinet for service. The overall height is 78 inches, so check overhead clearance from lights, pipes, and doors, too.

Place the RS-750DS on a level concrete floor. A full 53-gallon tank adds more than 400 lbs. of weight, and a full load can add up to 1,000 lbs. more. A level, solid floor keeps the turntable spinning evenly and helps the tank drain properly.

RS-750DS cleaning features

Safe Aqueous Cleaning With the RS-750DS

The RS-750DS is designed for safe aqueous operation, which means it cleans with hot water and detergent instead of harsh solvents. Aqueous cleaning cuts down on solvent fumes in the shop and reduces the amount of flammable liquid stored near your work area.

Use a low-foam detergent made for heated spray washers. Foam can cause pump problems and overflow in a spray cabinet. If you clean aluminum parts, pick a detergent labeled safe for aluminum so it does not stain or etch the metal. Mix the detergent at the ratio the maker recommends and run it within the 160°-180°F range the heaters provide.

Keep safety data sheets for every detergent you use and train employees on safe handling. The OSHA hazard communication standard explains labeling and training rules for workplace chemicals. When the solution is spent, dispose of it and the tank sludge according to the EPA hazardous waste generator rules and your local requirements.

RS-750DS

Running a Wash Cycle Step by Step

  1. Fill the 53-gallon tank to the correct level and add detergent.
  2. Turn on the dual heaters and let the solution reach 160°-180°F.
  3. Scrape off heavy sludge and loose dirt from the parts.
  4. Open the octagonal door and load heavy parts in the center of the turntable.
  5. Hang smaller parts on the parts tree and put hardware in the small parts basket.
  6. Turn the turntable by hand to make sure nothing hits the spray pipes.
  7. Close the door and set the cycle timer from 0 to 60 minutes.
  8. Start the RS-750DS and let it run.
  9. When the cycle ends, let steam clear before opening the door.
  10. Wear gloves and eye protection when you remove hot parts.

RS-750DS Maintenance Checklist

  • Empty the oil skimmer regularly so oil does not build up on the solution.
  • Clean the removable tank screen to keep debris out of the pump.
  • Check the water level and top off as water evaporates. The low water shutoff protects the heaters, but keeping the tank full avoids downtime.
  • Inspect the nozzles and clear any that are blocked.
  • Remove sludge from the bottom of the tank on a regular schedule.
  • Change the solution when it stops cleaning well, using the large drain pipe.
  • Check the turntable and friction drive so the load turns smoothly.

Stainless steel construction makes cleanup easier and helps the cabinet resist corrosion, but routine care still keeps the pump, heaters, and turntable working at their best.

Who Should Buy the Ranger RS-750DS?

The RS-750DS is a strong choice for shops that clean big, heavy parts on a regular basis:

  • Truck and diesel repair shops
  • Engine and transmission rebuilders
  • Fleet maintenance departments for trucks, buses, and vans
  • Agricultural and construction equipment shops
  • Machine shops that prepare large castings for machining
  • High-volume shops that want fewer cycles per day

If your shop works mostly on small passenger car parts, a smaller cabinet may be enough. If you often struggle to fit tall transmissions and diesel blocks in your current washer, the 54-inch inside height of the RS-750DS solves that problem.

RS-750DS best uses

RS-750DS vs. Hand Cleaning

Scrubbing large parts by hand takes hours and exposes technicians to dirty solution. The RS-750DS changes that. A technician loads the cabinet, sets the timer, and goes back to billable work. Hot solution at 70 GPM reaches every side of the part as the turntable spins, so results are consistent from load to load. Clean parts also make it easier to spot cracks, wear, and leaks during inspection.

Planning Your Wash Area

Put the RS-750DS close to where parts come off vehicles and engines, so heavy components travel only a short distance. An engine crane or overhead hoist makes loading safer. If you are also planning lifts for the same building, our car lifts section can help you lay out bays and wash space together.

RS-750DS Safety Tips

  • Wear chemical-resistant gloves and safety glasses when handling parts and solution.
  • Let steam clear before you open the door after a hot cycle.
  • Use a hoist or engine crane to lift heavy parts onto the turntable.
  • Never load more than 1,000 lbs. on the turntable.
  • Keep cords and electrical connections dry, and leave wiring to a qualified electrician.
  • Lock the casters or block the cabinet once it is in its final position.
  • Train every user on the timer, thermostat, and shutdown steps.

Good habits around a hot spray cabinet protect your team and keep the RS-750DS running reliably. Post the basic steps near the cabinet so new technicians can follow them.

Frequently Asked Questions About the RS-750DS

What is the load capacity of the RS-750DS?

The turntable is rated for up to 1,000 lbs. (454 kg).

How tall is the inside of the RS-750DS?

The inside height is 54 inches, and the inside width is 32 inches.

How big is the tank?

The RS-750DS has a 53-gallon tank.

What power does it need?

It uses a 1 HP motor at 220 VAC, 60 Hz, single phase, with a 6 kW electric heater.

How hot does the water get?

Water temperature runs from 160°F to 180°F (71°-82°C).

How many nozzles does it have?

It has 22 nozzles fed by a pump rated at 70 psi and 70 gpm.

Is the RS-750DS made of stainless steel?

Yes. It features heavy-duty stainless steel construction, stainless nozzles, a stainless oil skimmer, and stainless handles.

How much floor space does it need?

Ranger recommends 44 inches by 43 inches of floor space, plus room to open the door and load parts.

What is the shipping weight?

The RS-750DS ships at 704 lbs. (319 kg).

What comes with it?

It includes a removable parts tree, a small parts basket, and a free bucket and soap.

Get the Ranger RS-750DS for Your Shop

The Ranger RS-750DS stainless spray wash cabinet brings extra-large capacity, hot aqueous cleaning, and long-lasting stainless construction to your shop. With a 54-inch inside height, 1,000-lb. turntable, 53-gallon tank, dual 6 kW heaters, and a 70 GPM pump, the RS-750DS cleans big parts in fewer cycles. Contact Ironside Garage with questions about power, delivery, or setup, and browse more shop equipment for your service bays.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ranger RS-750DS”

Your email address will not be published. Required fields are marked *

Shipping & Delivery