Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift
$7,895.00
Bendpak MDS-6LPF 6000 lb Capacity Mid Rise Scissor Lift If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS-6LPF. It shares all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel
The MDS-6LPF Scissor Lift is a professional-grade scissor lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the MDS-6LPF Scissor Lift, along with setup tips, maintenance advice and answers to common questions.
MDS-6LPF Scissor Lift Features and Specifications
Stronger lift from a collapsed position
A pneumatic “kick” powers the lift up from the collapsed height, which for a flush-mount means it goes from zero-footprint to full rise in about 45 seconds. This extra boost ensures a more even lift in the early inches, and the hydraulics take over from there.
Four hydraulic cylinders
We put enough power in this scissor lift to ensure it handles that 6,000-lb. load without a hitch. Fluid traveling to all four cylinders goes through a flow divider to ensure equal pressure at all times. The platforms are always going to rise and descend simultaneously every inch of the way.
Solid-steel safety lock bars
With three locking positions to choose from, the MDS-6LPF offers incredible work height versatility. If you’ve got a pit, the mid-rise design becomes a full-height service lift.
Convenient stainless-steel pneumatic cylinders
Instead of spring releases, which tend to wear over time, our flush-mount design features air cylinders pressurized to 50 psi, 10-CFM. A simple hand pump or air compressor will have the cylinders ready to go in seconds.
A push-button safety lock release system
The push of a button releases all locks simultaneously and quickly lowers the scissor lift platforms down to their flush-mounted starting position.
Hinge-point features Zerk grease fittings
Zerk grease fitting are long-lasting, self-lubricating and simple to maintain. They’ll virtually last forever with minimal care.
Durable, cushioned rubber contact blocks
Hard rubber blocks come standard with your lift purchase. No small, dinky pads here. These rugged lifting tools will protect your vehicles’ frames and are guaranteed not to slip when properly placed during lifting procedures.
NOTE: The lift platform and contact blocks allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick-up points on most vehicles. Be sure to compare your vehicle specifications, including ground clearance and overall height, with the specifications shown before you purchase.
Detailed installation and maintenance instructions
We include a full installation and training/service manual, along with safety decals and stickers, for your convenience.
Features
Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class
Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity
Soli-steel safety lock bars engage automatically during ascent
Convenient stainless-steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button. (NOTE: Requires min. 50 psi, 10-CFM air source at time of installation.)
A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles
Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
Comes standard with four durable cushioned-rubber contact blocks, permitting fast vehicle setup
Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue
Powder coat finish provides a long lasting durable finish
Flush-mount design for in-ground installation in lube shops, full-service bays and home garage environments looking for a zero-footprint lift
Specifications
Lifting capacity: 6,000 lbs. (2,722 kg)
Lifting height: 39″ (991 mm)
Lifting height + blocks: 41″ (1,041 mm)
Lift platform dimensions: 19″ x 66″ (484 mm x 1,676 mm)
Width between platforms: 40″ to 46″ (1,018 mm to 1,168 mm)
Overall width: 19″ (484 mm)
Overall length: 66″ (1,676 mm)
Lowered height: Flush
Lifting time: 35 seconds
Motor: 110–220 VAC / 60 Hz / 1 Ph
MDS-6LPF Scissor Lift Photos




Key Highlights of the MDS-6LPF Scissor Lift
Here is a quick summary of what stands out on this scissor lift:
- Soli-steel safety lock bars engage automatically during ascent
- Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
- Comes standard with four durable cushioned-rubber contact blocks, permitting fast vehicle setup
- Powder coat finish provides a long lasting durable finish
Why Shops Choose the MDS-6LPF Scissor Lift
c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`
Benefits of a Quality Scissor Lift
The best scissor lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the MDS-6LPF Scissor Lift
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the MDS-6LPF Scissor Lift
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the MDS-6LPF Scissor Lift from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Scissors Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right scissor lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the official BendPak website.
MDS-6LPF Scissor Lift FAQs
Do I need special concrete for the MDS-6LPF Scissor Lift?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the MDS-6LPF Scissor Lift or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the scissor lift correctly, which protects your investment and your technicians.
How is the MDS-6LPF Scissor Lift shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the MDS-6LPF Scissor Lift come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
Atlas 6MR Portable Mid-Rise 6000 lb Capacity Scissor Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift
BendPak LR-10000 10000 lb Capacity Low-Rise Lift BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety
BendPak LR-60 Car Lift
BendPak LR-60 Car Lift With BendPak’s LR-60 you’ll be able to experience firsthand what state-of-the-art compact lifting can look like. This low-rise lift can easily handle up to 6,000 lbs. and is loaded with additional features. It comes with multi-position safety locks, rubber lifting blocks, a dr
BendPak MDS-6EXT Car Lift
BendPak MDS-6LP Car Lift
BendPak MDS-6LP Car Lift The MDS-6LP sports an open-center design which makes it one of the best options in terms of convenience and work productivity. This lift can handle vehicles weighing up to 6,000 lbs. BendPak has crafted this lift for home garages, full-service shops, quick-lube pits, and rea
BendPak P-9000LT Car Lift
BendPak SP-7XEF Car Lift
BendPak SP-7XEF Car Lift The SP-7XLF is the flush-mount version of BendPak’s full-rise scissor lift that can lift up to 7,000 lbs. This lift is perfect for a garage with a recessed area of concrete. The lift will practically be invisible. A collapsed SP-7XLF is extremely low-profile, but it can take

Reviews
There are no reviews yet.