BendPak MDS-6EXT Car Lift

$8,395.00

BendPak MDS-6EXT Car Lift You haven’t experienced state-of-the-art lifting convenience until you’ve used a BendPak mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts features safety lock bars with multiple lock positions.

SKU: IRG0375 Categories: ,
Description

Looking for a reliable scissor lift? The BendPak MDS-6EXT delivers the durability, safety and ease of use that busy service bays demand. This page covers the BendPak MDS-6EXT features, specifications, installation planning and care so you can buy with confidence.

BendPak MDS-6EXT Features and Specifications

Get an Extended-Length Car Lift for Longer Wheelbases

The next generation of electric vehicles has arrived, and it didn’t go unnoticed by us that the lifting points of these vehicles are very different. Using long-wheelbase vehicles (which includes some very popular electric cars) as our point of reference, BendPak has designed the MDS-6EXT mid-rise lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. Along with the flush-mount MDS-6EXTF, these two models maintain their open-center design, just like their standard MDS-6LP and MDS-6LPF models.

Add or remove ramps at your leisure

Clipping on a set of extended approach ramps turns your flush-mount mid-rise lift into an approach lift. The ramps are long enough to accommodate low-stance vehicles with ease, and they make it easier for vehicles with larger tires to glide on without difficulty.

Stronger lift from a collapsed position

The MDS-6EXT has a pneumatic kicker that literally boosts the lift platforms for the first 6” of lift. This is important because a scissor lift’s convenience also creates a mechanical disadvantage that BendPak has found a way around. In other words, being able to lower the lift a mere 4” off the ground makes the physics of lifting heavy machinery difficult. This is especially true when ensuring this lift occupies as little space in your shop as possible. Therefore, air-powered “rocket boosters” are installed that assist the hydraulics in the initial lifting phase. They never need maintenance and will ensure your lifting life is easier than ever.

Four hydraulic cylinders

All four hydraulic cylinders on this car lift work in unison to create an even lift at all times. A built-in flow divider ensures that each hydraulic hose receives equal pressure. After the initial pneumatic assistance, the cylinders work on their own to achieve about 45” of lift in seconds flat.

Solid-steel safety lock bars

While the lift rises, the safety arms lock automatically and continuously. When secured in place, the mechanical locks take all the pressure off the hydraulic system, ensuring zero chance of failure due to fluid leaks.

Convenient stainless-steel pneumatic cylinders

Instead of spring releases, the MDS-6EXT features air lock releases that instantly disengage the lock upon descent. They require almost zero maintenance and are absolutely as safe as spring devices. Require 50 PSI, 10 CFM air source during installation.

A push-button safety lock release system

A single push of a button instantly releases the air locks and permits a safe, efficient descent. The flow divider ensures the ramps remain level at all times during use.

Hinge-point features Zerk grease fittings

Grease fittings are necessary to keep the critical wear areas from degrading due to friction. BendPak’s self-lubricating Zerk fittings do just that, and they rarely need maintenance. Over time, you’ll mostly forget they exist. However, you will enjoy how well your lift runs year after year.

Durable, cushioned rubber contact blocks

The MDS-6EXT mid-rise lift comes with a full set of rugged rubber lift blocks. These blocks are meant to withstand heavy use and abuse over many years of service. Each block is treaded to make sure it stays exactly at the manufacturer-recommended lift point of the vehicle you’re lifting.

Three locking positions

With multiple lock positions available, you choose the height appropriate for the job. Whether it’s a few inches of rise for brake service or the full extension to feel comfortable underneath the lifted vehicle, the choice is yours.

Detailed installation and maintenance instructions

Every MDS-6EXT mid-rise lift comes with detailed instructions for use. This includes safety decals and placement information, as well as training placards to help get your technicians trained on proper lift technique. Ensuring proper maintenance protocol is life-saving and will extend the lifespan of your lift.

Choose flush-mount

The MDS-6EXTF extended-length, flush-mount, mid-rise lift is the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can’t do better than this BendPak. NOTE: The lift platform and contact blocks allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick‐up points on most vehicles. Be sure to compare your vehicle specifications, including ground clearance and overall height, with the specifications shown before you purchase.

Features

  • 6,000-lb. lifting capacity
  • Open-center design
  • Solid-steel safety lock bars
  • Multiple lock positions
  • Hinge-point with Zerk grease fittings
  • Low-profile design
  • Rubber blocks included
  • Removable ramps

Specs

Lifting Capacity: 6,000 lbs. (2,724 kg)

Lifting Height: 36.75″ (934 mm)

Max. Lifting Height + Blocks: 38.25″ (972 mm)

Lifting Platform Dimensions: 19″ x 78.7″ (484 mm x 2,000 mm)

Width between platforms: 40″ – 46″ (1,018 mm – 1,168 mm)

Overall Width: Adjustable

Overall Length: 104.3″ (2,650 mm)

Lowered Height: 5.25″ (133 mm)

Lifting Time: 35 sec

Motor: 208-230 VAC / 60 Hz / 1 Ph

Shipping Weight: 1,748lbs. (793 kgs)

Shipping Dimensions: 80″ x 67″ x 20″ (2,032 mm x 1,701 mm x 508 mm)

BendPak MDS-6EXT Photos

BendPak MDS-6EXT scissor lift

BendPak MDS-6EXT at a Glance

  • The BendPak MDS-6EXT is built for daily professional use.
  • The BendPak MDS-6EXT is backed by manufacturer support and documentation.

Key Highlights of the BendPak MDS-6EXT

Here is a quick summary of what stands out on this scissor lift:

  • 6,000-lb. lifting capacity
  • Open-center design
  • Solid-steel safety lock bars
  • Multiple lock positions
  • Hinge-point with Zerk grease fittings

Why Shops Choose the BendPak MDS-6EXT

c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`

Benefits of a Quality Scissor Lift

The best scissor lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.

Common Uses for the BendPak MDS-6EXT

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the BendPak MDS-6EXT

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the BendPak MDS-6EXT from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Scissors Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right scissor lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak MDS-6EXT FAQs

Do I need special concrete for the BendPak MDS-6EXT?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak MDS-6EXT or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the scissor lift correctly, which protects your investment and your technicians.

How is the BendPak MDS-6EXT shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak MDS-6EXT come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak MDS-6EXT Car Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery