10AP-SRT
$6,595.00
The BendPak 10AP-SRT represents the future of two-post lifts. As part of the all-new AP Series, this cutting-edge lift is versatile, safe, and perfect for tire and wheel service. Whether you’re lifting vehicles symmetrically or asymmetrically, the 10AP-SRT has you covered!
The 10AP-SRT Two Post Lift is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the 10AP-SRT Two Post Lift, along with setup tips, maintenance advice and answers to common questions.
10AP-SRT Two Post Lift Features and Specifications
The Ultimate Lift Solution for Tire Pros
BendPak’s 10AP-SRT has been designed to safely handle up to 10,000-lbs. with ease. Its short-rise, short-column design offers a max rise of roughly 46 inches, making it ideal for tire service and detailing. Plus, its compact design fits perfectly in both spacious shops and low-ceiling garages.
The AP Series combines the best features of today’s two-post lifts into a revolutionary design. Built to handle tough jobs and heavy loads, this lift ensures the safety of both the vehicle and the operator.
Unparalleled Safety with Automatic Arm Restraint
The BendPak AP Series shines with its Automatic Swing Arm Restraint System (ASARS). With a full 360-degrees of load holding grip, the heavily forged-steel design of this patented and very exclusive arm restraint system secures the lift arms firmly in place with over 2000-pounds of load-holding force, preventing unplanned swing arm movement during lift use and vehicle service operations. This revolutionary design is an adaptive system that requires minimal operator involvement and delivers unparalleled holding power. A distinctive power-hold design that allows for precise non-shifting action, and a handy quick-release operator lever allowing for the instant release of the clamping pressure.
Triple-Telescoping Nested Swing Arm Design
Revolutionary and patented swing arms are specifically tailored for varying vehicle lifting points. Unlike traditional two-post lift arms, 10AP arms retract shorter and extend farther; offering lift operators a myriad of lift arm positioning options – it’s like having the best of all worlds.
The 10AP-SRT’s patented swing arms retract shorter and extend farther than traditional lift arms. This innovative design offers more positioning options, making it versatile for varying vehicle lifting points. The three-stage arms provide greater retraction and extension for precise lifting.
Low Profile Arms
BendPak’s exclusive Low-Pro™ swing arms feature telescoping channels that have a shorter profile and a dropped-end pad receiver resulting in better serviceability on lowered chassis-height vehicles. They access hard-to-reach lift points with less hindrance providing increased versatility and less chance of damage to vehicle side skirts, running boards or ground effects. Varying height stackable adapters combined with two stage spin-up screw pads provide greater vertical pad placement for precise and safe vehicle support.
Features
- Power Side Post – The power side post holds the power unit, the safety lock release handle, and the lowering handle (which is on the power unit).
- Offside Post – The opposite Post.
- Power Unit – Provides hydraulic fluid pressure to the lift and connects to an appropriate power source. Includes the Up button, the lowering handle, and the hydraulic fluid reservoir.
- Safety Lock Release Handle – Located on the power post above the power unit, it disengages the safety locks so you can lower the lift.
- Safety Covers – Cover the safety lock mechanism on the posts.
- Floor Plates – Cover the hydraulic hoses, equalizing cables, and safety cable routed between each post.
- Lift Heads – Sometimes called carriages. Lift heads move up and down in the posts. They connect to the lift arms, so when the lift heads rise, so do the lift arms.
- Lift Arms – Extendable steel arms that attach to the lift heads.
- Adapters – Pads that contact the lifting points on the underside of the vehicles you raise. Four cradle adapters are included with your lift and are well-suited for raising trucks and SUVs (body-on-frame style). Additional adapters are available separately and include height adapters, pinch weld pads and screw adapters.
- Height Adapter Trays – Attach to the bottom of the posts, used for holding the spare adapters when not in use.
- Safety Locks – Hold the lift heads up when engaged. Multiple safety lock heights let you select the best one for your needs. Once engaged on its safety locks, the lift heads stay up, even if the lift loses power. Only leave your lift fully lowered or engaged on safety locks.
- Durable powder coat finish
- Expandable top beam accommodates wide or narrow drive-through configurations
- Double-telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Exclusive Bi-Metric™ arm design for more versatile arm positioning
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53” & 59” tall carriages for superior strength and durability
- Electric / hydraulic HVLP power system
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3”
- Automatic arm restraints withstand over 2000-pounds of side force
- Heavy-duty ½” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Four triple-telescoping arms
- ALI certified
Specs
| Lifting Capacity | 12,000 lbs. (5,443 kg) |
|---|---|
| Maximum Capacity – Front Axle | 6,000 lbs. (2,721.5 kg) |
| Maximum Capacity – Rear Axle | 6,000 lbs. (2,721.5 kg) |
| Maximum Capacity per Lift Arm | 3,000 lbs. (1,360 kg) |
| A – Width Overall | 155 in. (3,937 mm) |
| B – Base Plate Width | 26.5 in. (674 mm) |
| C – Post Height | 93.5 in. (2,377 mm) |
| D – Drive-Thru | 102.25 in. (2598 mm) |
| E – Inside Posts | 119 in. (3,026 mm) |
| F – Outside Posts | 142 in. (3,606 mm) |
| G – Minimum Height with Pad | 4.25 in. (105 mm) |
| H – Max. Lifting Height | 46 in. (1,168 mm) |
| I – Max. Rise | 42.75 in. (1,089 mm) |
| J – Min. Height with Adapters (5 in + 2.5 in) | 11.75 in. (298 mm) |
| K – Floor Plate Height | 1.5 in. (36 mm) |
| L – Floor Plate Width | 9.5 in. (240 mm) |
| M – Front Arm Reach (Measured from the Lift Arm Pivot to the Cradle Pad Center Pin) |
26 in. min – 55.25 in. max. (659 mm min. – 1,403 mm max.) |
| N – Rear Arm Reach (Measured from the Lift Arm Pivot to the Cradle Pad Center Pin) |
29.25 in. min. – 60 in. max. (745 mm – 1,525 mm max.) |
| Safety Lock Positions | 8 |
| Standard Motor* | 208-230 VAC, 50/60 Hz, 1 Phase, 5 HP, 23 Amps |
| Time to Full Rise | ≈45 seconds |
| Sound Pressure | Lift produces less than 85dB when in operation. |
| Operating Hydraulic Pressure under Max. Load | 2,170 psi |
10AP-SRT Two Post Lift Photos

10AP-SRT Two Post Lift at a Glance
- The 10AP-SRT Two Post Lift is built for daily professional use.
- The 10AP-SRT Two Post Lift is backed by manufacturer support and documentation.
- Our team can confirm shipping options for the 10AP-SRT Two Post Lift to your location.
- The 10AP-SRT Two Post Lift is a smart fit for shops upgrading their equipment.
Key Highlights of the 10AP-SRT Two Post Lift
Here is a quick summary of what stands out on this two post lift:
- The Ultimate Lift Solution for Tire Pros
- Unparalleled Safety with Automatic Arm Restraint
- Triple-Telescoping Nested Swing Arm Design
- Offside Post – The opposite Post.
- Safety Covers – Cover the safety lock mechanism on the posts.
Why Shops Choose the 10AP-SRT Two Post Lift
c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`
Benefits of a Quality Two Post Lift
Reliable equipment is one of the best investments a shop can make. A dependable two post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.
Common Uses for the 10AP-SRT Two Post Lift
c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`
Installation and Setup
c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`
Safety and Maintenance Tips for the 10AP-SRT Two Post Lift
c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`
Buy the 10AP-SRT Two Post Lift from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the Automotive Lift Institute (ALI).
10AP-SRT Two Post Lift FAQs
Do I need special concrete for the 10AP-SRT Two Post Lift?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the 10AP-SRT Two Post Lift or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.
How is the 10AP-SRT Two Post Lift shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the 10AP-SRT Two Post Lift come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
Atlas 6MR Portable Mid-Rise 6000 lb Capacity Scissor Lift
Atlas FM9SL In Ground Full Rise 9000 lbs Capacity Scissor Lift
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable
BendPak MD-6XP 6000 Lbs Capacity Mid-Rise Frame Lift Portable When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift We’re not just talking a big game; we’re offering the first open-center mid-rise lift ever made. Decades of experience have taught us a thing or two about vehicle lift points. A car lift with longer platforms means you get to lift more vehicle t
BendPak MDS-6LP Car Lift
BendPak MDS-6LP Car Lift The MDS-6LP sports an open-center design which makes it one of the best options in terms of convenience and work productivity. This lift can handle vehicles weighing up to 6,000 lbs. BendPak has crafted this lift for home garages, full-service shops, quick-lube pits, and rea
Challenger DX77 7700 lb ALI Certified Scissor Lift
Challenger DX77 7700 lb ALI Certified Scissor Lift Looking for a scissor lift that can easily handle many makes and models while ensuring maximum productivity and safety? Look no further than the DX77. With a robust 7,700 lbs. capacity and a synchronized hydraulic system, this lift can handle many v

Reviews
There are no reviews yet.