8000TLX Portable Truck Lift

$2,275.00

The 8000TLX is QuickJack’s most powerful extended-length portable truck lift, built to handle up to 8,000 lbs. Its 76-inch frame and 66-inch lift point reach make it ideal for long-wheelbase trucks, SUVs, and large sedans. Despite its size, it still fits under most sports cars with ease.

SKU: IRG0359 Categories: ,
Description

The QuickJack 8000TLX is a heavy-duty, extended-length portable truck lift rated for 8,000 lbs. It lifts trucks, SUVs, and long-wheelbase vehicles in about 30 seconds, then collapses to 3.5 inches for easy storage. Here’s everything you need to know about the 8000TLX.

Overview

8000TLX Extended-Length Portable Truck and SUV Lift

The QuickJack 8000TLX is the highest-capacity, extended-length portable lift in our lineup—engineered specifically for heavy-duty trucks, SUVs, and long-wheelbase vehicles. With an 8,000-lb. capacity and a 66-inch lift point reach, it handles the jobs that standard car lifts can’t touch. Built tough, yet fully collapsible, this portable truck lift gives you full access beneath your vehicle without the footprint of a permanent setup.

Despite its size, the 8000TLX still reaches max rise in about 30 seconds, and its low 3.5-inch collapsed height means it fits under most sedans and sports cars too. Add the optional Truck & SUV Adapter Kit for even more undercarriage access on higher-clearance vehicles.

Upgrades include a pressure-compensated flow divider for synchronized lifting, reinforced frame geometry, and a factory preassembled hydraulic system. All these improvements ensure faster setup, smoother operation, and maximum durability in the shop or at home.

The 76-inch frames are designed for serious reach but remain compact enough to roll and stow easily using QuickJack’s built-in urethane wheels. Take it anywhere—garage, driveway, shop, or even off-site—as long as you’ve got a flat surface to work on.

Extended-length design and lift point specs

The 8000TLX was engineered to accommodate long-wheelbase vehicles with lift points that exceed standard lengths. Its frame and lift point spread are 6 inches longer than TL models, so be sure to measure before purchasing for shorter vehicles.

TL minimum lift point spread: 37″
TLX minimum lift point spread: 43″

TL maximum lift point spread: 60″
TLX maximum lift point spread: 66″

TL overall frame length: 70″
TLX overall frame length: 76″

What’s different about the NEW TLX Models?

The 8000TLX delivers a full 1,000-lb. boost in capacity over the 7000TLX and includes the latest QuickJack upgrades: reinforced structural components, an upgraded hydraulic system, and a safer, more stable lift cycle. Best of all, it still folds to just 3.5 inches for easy storage and portability.

Features

Factory preassembled hydraulics

Each 8000TLX ships with its hydraulic system preassembled at the factory, saving time during setup and ensuring flawless performance right out of the box. You’ll be lifting faster with fewer steps and no guesswork.

Automatic safety locks

The 8000TLX includes dual-position automatic safety locks that engage securely as the frames lift. Locks automatically slide into place at both mid-rise and full-rise positions, and a simple flip of the lock bar releases them for smooth, controlled descent.

Extended-length power & clearance

Built for long-wheelbase vehicles, the 8000TLX features a 76-inch frame and 66-inch max lift point spread. With an 8,000-lb. capacity and 24.5-inch lift height, it’s the ideal portable lift for large SUVs, trucks, and specialty sedans with extended chassis requirements.

Upgraded hydraulic system

Our reengineered hydraulic power unit includes a pressure-compensated flow divider and independent shut-off solenoids to ensure both frames rise and lower in perfect sync—critical for heavier vehicles and added safety during operation.

Stronger frame, greater stability

The 8000TLX is built with thicker cross members, improved weld geometry, and enhanced pivot joints that resist flex under heavy load. These structural upgrades give you greater confidence, especially when lifting heavier or longer vehicles.

One-handed pendant operation

The simple pendant control lets you operate the lift with one hand, keeping your other hand free for guiding the frames or handling basic tasks. QuickJack lifts with the push of a button—no bending, cranking, or manual intervention.

Compact footprint, extended utility

Despite its reach and capacity, the 8000TLX still lowers to a 3.5-inch profile and rolls easily on built-in urethane wheels. It’s the perfect mobile solution for shops or home garages where versatility and space matter.

Accessories to increase versatility

The 8000TLX works with a wide range of QuickJack accessories, including truck and SUV adapters, pinch-weld blocks, and frame extensions. Configure your lift setup to meet your exact needs.

Specs

QuickJack specifications diagram

Lifting capacity

8,000 lbs. (3,629 kg)

Lowered height

A â€“ With 2″ block: 3.5″ (89 mm)

Lifting height

B â€“ With 2″ block: 21″ (521 mm)
C â€“ With 3″ block: 22″ (546 mm)
D â€“ Max. height: 24″ (616 mm)
E â€“ With adapters: 24″ (597 mm)
F â€“ With adapters + pin: 26.75″ (673 mm)

Lift point spread

G â€“ Maximum: 66″ (1,676 mm)
H â€“ Minimum: 43″ (1,092 mm)

Frame dimensions (ea.)

I â€“ Width: 11″ (278 mm)
J â€“ Length: 76″ (1,930 mm)
Weight: 81.5 lbs. (37 kg)

Other specs

Time to full rise: 30 seconds
Power unit weight: 15 lbs. (7 kg)
Shipping dimensions (ea. frame):
79.5″ (L) x 15.25″ (W) x 5″ (H)
(2,015 mm x 385 mm x 129 mm)
Shipping weight: 250 lbs. (113 kg)

8000TLX at a Glance

  • Capacity: 8,000 lbs.
  • Lift point reach: 66 inches
  • Time to full rise: about 30 seconds
  • Collapsed height: 3.5 inches
  • Pressure-compensated flow divider for synchronized lifting
  • Reinforced frame geometry and factory preassembled hydraulics

These features make the 8000TLX the highest-capacity, longest-reach model in the QuickJack portable lineup.

Why Heavy Vehicles Need the 8000TLX

Trucks and large SUVs push standard portable lifts to their limits. They weigh more, and their lift points are spread farther apart. The 8000TLX was built for exactly these vehicles. Its 8,000 lb. capacity covers many half-ton pickups, full-size SUVs, and vans, and its 66-inch lift point reach lets you place the blocks where your vehicle’s manufacturer intends.

Proper block placement matters. When the frames can reach the correct lift points, the load is supported where the vehicle is strongest, which keeps the lift stable and protects the body.

Synchronized, Smooth Lifting

The 8000TLX uses a pressure-compensated flow divider to keep both frames rising at the same rate, even when one side of the vehicle is heavier. A level lift is a stable lift, especially on a long, heavy truck. The factory preassembled hydraulic system also means fewer connections to make during setup and smoother operation every time.

Low Profile, High Versatility

Even though it’s built for trucks, the 8000TLX collapses to just 3.5 inches. That means it can slide under many sedans and sports cars as well. If your household has both a pickup and a car, one 8000TLX can often handle both, as long as each vehicle’s weight and lift points are within its range.

8000TLX

Optional Truck & SUV Adapter Kit

Lifted trucks and high-clearance SUVs often have lift points well above the ground. The optional Truck & SUV Adapter Kit adds height to the contact points so the 8000TLX can reach them safely. It’s a smart add-on if you drive an off-road rig or a vehicle with an aftermarket lift kit.

Who Should Buy the 8000TLX

  • Pickup and full-size SUV owners who do their own maintenance
  • Off-road and overland enthusiasts
  • Owners of long-wheelbase vans and wagons
  • Shops that want a flexible lift for any open bay
  • Mobile mechanics who need a lift that travels
  • Garages with low ceilings that can’t fit a post lift

For lighter cars, browse the other portable car lifts we carry.

Setting Up the 8000TLX

  1. Park the vehicle on a flat, level, hard surface and set the parking brake.
  2. Connect the hydraulic hoses and power unit.
  3. Slide one frame under each side of the vehicle.
  4. Position the rubber blocks, or the optional adapters, under the lift points.
  5. Raise a few inches and check contact at every point.
  6. Raise to full height and lower onto the mechanical safety locks.

Safety Comes First

Always lower the vehicle onto the 8000TLX’s mechanical safety locks before working underneath. Never exceed the 8,000 lb. capacity. Remove heavy cargo before lifting, keep people and pets clear while the lift moves, and inspect hoses and blocks before every use. Follow the QuickJack operating manual for every lift.

8000TLX front view

Jobs You Can Tackle With the 8000TLX

  • Oil, transmission, and differential fluid changes
  • Brake pads, rotors, and calipers
  • Tire rotations and seasonal swaps
  • Shocks, leaf springs, and lift kit installs
  • Exhaust work and skid plate removal
  • Undercarriage cleaning and rust prevention

Where to Use the 8000TLX

Use the 8000TLX only on a hard, flat, level surface, ideally concrete. Avoid soft asphalt, gravel, dirt, grass, and slopes. Make sure there’s enough room around the vehicle to open doors and move tools, and keep the area well lit.

Caring for Your 8000TLX

  • Inspect hydraulic hoses and couplers for damage or leaks.
  • Keep couplers clean and capped when disconnected.
  • Check the power unit’s fluid level as the manual directs.
  • Replace worn rubber blocks promptly.
  • Store the frames off the floor, such as on wall hangers, to keep them clean and dry.

Tips From Truck Owners

Mark the best frame position on your garage floor so you can line up the 8000TLX quickly each time. Keep a note of your vehicle’s lift point heights so you know whether you’ll need adapters. If you work on one end of the truck, chock the wheels at the other end. These simple habits make every lift faster and more secure.

Many owners also keep a dedicated bin for blocks and adapters next to the power unit so nothing goes missing between jobs.

8000TLX side view

8000TLX vs. Floor Jack and Stands

Lifting a heavy truck with a floor jack means working one corner at a time with a jack big enough for the load, then placing stands carefully. The 8000TLX raises a full side in one controlled motion in about 30 seconds and holds it on built-in locks. The center stays open, and you spend more time working and less time setting up.

8000TLX vs. a Permanent Lift

Post lifts need high ceilings, strong concrete, and a permanent spot. The 8000TLX works on any level floor, stores away when you’re done, and moves with you to another garage or job site. For many truck owners, that flexibility outweighs the extra height of a fixed lift.

Saving Time and Money

Routine truck maintenance at a shop can be costly. With the 8000TLX, many of those jobs move into your own garage. Oil changes, brake work, and rotations become quick, comfortable tasks. Over time, the savings and convenience make the 8000TLX a smart investment.

Frequently Asked Questions About the 8000TLX

What is the capacity of the 8000TLX?

It is rated for 8,000 lbs.

How long does it take to lift?

The 8000TLX reaches maximum rise in about 30 seconds.

How low does it collapse?

It collapses to 3.5 inches, low enough for many sedans and sports cars.

What is the lift point reach?

The 8000TLX offers a 66-inch lift point reach for long-wheelbase vehicles.

Can I use it on a lifted truck?

Yes, with the optional Truck & SUV Adapter Kit to reach higher lift points.

Does it need to be installed?

No. The 8000TLX is fully portable and needs no permanent installation.

8000TLX detail

Planning Your Purchase

Before ordering, check your vehicle’s curb weight and the distance between its front and rear lift points. Measure lift point height if your truck is lifted. Compare those numbers to the 8000TLX’s 8,000 lb. capacity and 66-inch reach. If you’re unsure, our team will help you confirm the fit.

Built for the Long Haul

Reinforced frame geometry and a factory preassembled hydraulic system give the 8000TLX the strength and reliability heavy vehicles demand. With basic care, it will serve your garage or shop for years of regular use.

Support From Ironside Garage

Our team helps home mechanics and professionals choose the right lift. We can explain capacities, frame lengths, accessories, and delivery for the 8000TLX, and we’re here to help after your order arrives too.

Vehicles That Pair Well With the 8000TLX

The 8000TLX is a natural fit for half-ton pickups, full-size SUVs, large crossovers, passenger vans, and long-wheelbase sedans and wagons. These vehicles tend to be heavier and longer than what compact portable lifts are designed for. The extra reach and capacity of the 8000TLX close that gap. As always, confirm your vehicle’s curb weight and lift point locations in the owner’s manual before lifting.

If you own a mix of vehicles, the 8000TLX’s low 3.5-inch collapsed height is a real bonus. The same lift that handles your truck can often slide under your car, so one tool covers the whole driveway.

8000TLX in use

Using the 8000TLX in a Professional Setting

Shops and fleet operators like the 8000TLX because it isn’t tied to a single bay. It can go wherever there’s open floor space, then be stored at the end of the day. Many shops use it as a quick-service lift for tires, brakes, and inspections, keeping their main lifts free for long repairs. Mobile mechanics can load it into a truck and bring it to customers’ homes or job sites.

Storage Ideas

When it’s not in use, store the 8000TLX frames upright against a wall, ideally on QuickJack wall hangers, to keep your floor clear. Put the power unit and hoses on a shelf, and keep blocks and adapters together in a labeled bin. A tidy setup protects your equipment and makes the next lift faster.

What Makes the 8000TLX Stand Out

Plenty of lifts promise strength, but the 8000TLX combines it with real portability. It reaches the lift points of long vehicles, lifts 8,000 lbs. evenly, and still folds down small enough to store or transport. For truck owners who want professional-style access without a permanent install, it’s one of the best options available.

Ready to upgrade from jacks and stands? The 8000TLX makes working under a heavy vehicle safer, faster, and far more comfortable. Contact Ironside Garage with any questions and we’ll help you choose with confidence.

Your First Week With the 8000TLX

Most new owners start with an easy job, like a tire rotation or an oil change, to get familiar with the lift. Take your time on the first lift. Find the lift points, place the blocks, raise the vehicle a few inches, and walk around to check every contact. Then raise it fully and lower onto the locks. After one or two lifts, the routine becomes second nature.

From there, bigger projects like brake overhauls, suspension upgrades, and exhaust work feel much more manageable. The 8000TLX gives you the room, stability, and confidence to take on jobs you might have sent to a shop before. Many owners find they enjoy working on their trucks again once getting underneath is no longer a struggle.

In short, the 8000TLX brings serious lifting power to any garage with a level floor. It is strong enough for full-size trucks, long enough for wide lift points, quick enough to save real time, and compact enough to put away when the work is finished. That balance is exactly why so many truck and SUV owners choose it over every other portable option on the market today.

Order the 8000TLX Today

The 8000TLX is a proven, powerful portable lift for trucks and SUVs. Learn more on the official QuickJack website, or explore our full car lifts collection.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “8000TLX Portable Truck Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery