Atlas SBC420 Standard Sandblast Cabinet with Vacuum
$2,649.00
Atlas SBC420 Standard Sandblast Cabinet with Vacuum The Atlas® SBC420 sandblast cabinet features dual side doors and a large front door for easy loading and unloading. The lower hopper stores the abrasive material for reuse or easy removal. The SBC420 cabinet is always ready when you are. The cabine
The Atlas SBC420 is a standard media blast cabinet with an attached vacuum dust collector. With a 47.5 x 24 x 22.5-inch work area, a foot-operated control valve, and top and side load doors, the SBC420 gives auto shops, restorers, and fabricators a clean, contained way to strip paint, rust, and scale from parts.
Atlas SBC420 Standard Sandblast Cabinet with Vacuum
Features and Benefits
Media Blasting Cabinet
Work area: 47 1/2” x 24” x 22 1/2”
Foot operated control valve
Heavy Duty blasting gun with replaceable ceramic nozzles
Self-contained dust collection system with cartridge filter and convenient bottom gate clean-out
Large top load door and dual side load doors
16 guage cabinet panels and 14 gauge legs
Extra nozzles and plastic protectors included
110V Power
Recommended media – Glass Bead (NOT INCLUDED)
Replacement Parts & Wear Items Always in Stock
This part number FREIGHT PREPAID
Atlas SBC420 Sandblast Cabinet Specifications
Work Area: 47 1/2″ W x 24″ D x 22 1/2″ H
Overall Dimensions: 53″ W x 35″ D x 65 1/2″ H
Viewing Window: 22 1/2″ L x 10 1/2″ H
Gloves: 24″ Gauntlet
Power gun: NE490 Foot Pedal w/ Gun
Vacuum: Attached
Electric Requirement: 110volt
Air Requirement: 15 cfm/80-100 PSI (External Air Supply Required)
Shipping Weight: 400 lbs
SBC420 Specifications
- Work area: 47.5″ W x 24″ D x 22.5″ H
- Overall dimensions: 53″ W x 35″ D x 65.5″ H
- Viewing window: 22.5″ L x 10.5″ H
- Gloves: 24-inch gauntlet
- Power gun: NE490 with foot pedal
- Vacuum: attached
- Electrical: 110V
- Air requirement: 15 CFM at 80–100 PSI (external air supply required)
- Shipping weight: 400 lbs.
SBC420 Features
- Foot-operated control valve
- Heavy-duty blasting gun with replaceable ceramic nozzles
- Self-contained dust collection with cartridge filter
- Bottom gate clean-out for easy media removal
- Large top load door plus dual side load doors
- 16-gauge cabinet panels and 14-gauge legs
- Extra nozzles and plastic window protectors included
- Recommended media: glass bead (not included)
Clean, Contained Blasting
Open-air sandblasting creates dust everywhere and wastes media. The SBC420 keeps the work inside a sealed cabinet, so dust and media stay contained. The attached vacuum and cartridge filter draw dust away from the viewing window and the room, giving you a clearer view of your work and a cleaner shop.
Foot Pedal Control
A foot-operated control valve lets you start and stop blasting without taking your hands off the part or the gun. That gives you better control over where media goes and helps conserve air and media.
Easy Loading
A large top-load door makes it easy to place bigger parts inside, while dual side-load doors let you slide in longer items or access the work from either end. Flexible loading saves time and reduces strain when handling heavy parts.
Durable Build
The SBC420 uses 16-gauge cabinet panels and 14-gauge legs for a sturdy, long-lasting structure. A heavy-duty blasting gun with replaceable ceramic nozzles stands up to abrasive media, and spare nozzles are included.
Simple Media Clean-Out
A bottom gate clean-out makes it easy to empty or change media. That’s handy when switching media types or clearing out spent material.
Who Should Buy the SBC420
- Automotive repair and restoration shops
- Powder coating and paint shops
- Fabrication and welding shops
- Small engine and motorcycle shops
- Serious hobbyists and home restorers
- Maintenance departments that clean parts regularly
Explore more tools in our shop equipment section.

What Can You Blast?
- Brackets, hinges, and small body parts
- Wheels and suspension components (sized to fit)
- Engine and transmission parts
- Motorcycle parts and small components
- Tools, fixtures, and hardware
- Fabricated parts before welding or painting
How to Use the SBC420
- Connect an air supply capable of 15 CFM at 80–100 PSI.
- Plug the vacuum into a 110V outlet and turn it on.
- Load glass bead or other suitable media into the cabinet.
- Place the part inside through the top or side doors and close them.
- Put your hands in the gloves and pick up the blast gun.
- Press the foot pedal to blast, moving the gun evenly over the surface.
- Release the pedal, let the vacuum clear the dust, then remove the part.

Choosing Media
Atlas recommends glass bead for the SBC420 (media not included). Glass bead leaves a smooth, satin finish and is popular for cleaning metal parts without heavy material removal. Other media types are available for different results. Always choose media appropriate for the part and the finish you want, and follow the media manufacturer’s guidance.
Air Supply Requirements
The SBC420 needs an external air supply of 15 CFM at 80–100 PSI. Make sure your compressor can deliver that volume continuously, not just at peak. An undersized compressor will cause pressure to drop during blasting and slow your work. Use a water separator or dryer to keep moisture out of the media, which helps prevent clumping and clogging.
Safety Guidelines
Always keep the doors closed while blasting, and use the gloves provided. Run the vacuum during blasting to control dust. Wear eye protection when loading and unloading parts. Follow the manufacturer’s instructions and local regulations for dust and media disposal.
Maintenance Tips
- Replace window protectors when they become cloudy.
- Check and replace worn ceramic nozzles.
- Clean or replace the cartridge filter as needed.
- Inspect gloves for holes and replace when worn.
- Empty spent media through the bottom gate clean-out.
- Drain moisture from your compressor and air lines.
Why Use a Blast Cabinet?
Removing rust, paint, and scale by hand with wire brushes or sandpaper is slow and inconsistent. Chemical strippers can be messy and hazardous. A blast cabinet like the SBC420 cleans parts quickly and evenly, reaching into crevices that are hard to clean by hand. The result is a uniform surface ready for paint, powder coat, welding, or inspection.
Perfect for Restoration Work
Restorers often need to clean dozens or hundreds of small parts: brackets, bolts, hinges, and trim pieces. The SBC420 makes that work far faster. Parts come out clean and ready for refinishing, and the cabinet keeps the mess contained so your shop stays tidy during a big restoration project.

Prepping for Powder Coating
Powder coating needs a clean, properly prepared surface for good adhesion. Blasting removes old coatings, rust, and contaminants and leaves a surface profile the powder can grip. The SBC420 is a natural partner for powder coating operations, helping shops deliver durable, professional finishes.
Better Visibility
A 22.5 x 10.5-inch viewing window lets you see your work clearly. The attached vacuum pulls dust away from the window so visibility stays good during blasting. Replaceable plastic protectors keep the window itself from getting etched by media.
Comfortable Gloves
24-inch gauntlet gloves protect your hands and forearms while letting you handle parts and the gun comfortably. Replace them when they show wear to keep media and dust inside the cabinet.
Planning Your Space
The SBC420 measures 53 inches wide, 35 inches deep, and 65.5 inches tall. Choose a level spot with access to a 110V outlet and your compressed air supply. Leave room to open the top and side doors and to stage parts before and after blasting. Good lighting nearby makes loading and inspecting parts easier.

Blasting Technique Tips
Good technique makes a big difference in results. Hold the gun a few inches from the surface and move it in smooth, overlapping passes. Avoid holding the nozzle in one spot for too long, especially on thin metal, to prevent warping or excessive material removal. Rotate the part to reach all sides and use the foot pedal to start and stop precisely. With a little practice, you’ll get consistent, even finishes on every part you blast in the SBC420.
Keeping Media Dry
Moisture is the enemy of blast media. Wet media clumps, clogs the gun, and slows your work. Install a water separator on your air line, drain your compressor tank daily, and store media in a dry place. If media becomes damp, replace it. Dry air and dry media keep the SBC420 working smoothly.
Managing Dust
The self-contained dust collection system with a cartridge filter captures fine dust produced during blasting. Keep the vacuum running whenever you blast, and clean or replace the filter regularly to maintain good airflow. Strong airflow keeps the window clear and the room cleaner.
Replacing Wear Items
Nozzles, gloves, window protectors, and filters are wear items on any blast cabinet. The SBC420 includes extra nozzles and window protectors to get you started, and Atlas keeps replacement parts and wear items in stock. Replacing these items on schedule keeps performance high and helps the cabinet last for years.

A Typical Restoration Session
A restorer has a box of rusty brackets, hinges, and hardware from a classic car. They load a batch into the SBC420 through the top door, close it, and turn on the vacuum. With hands in the gloves, they pick up each part, press the foot pedal, and sweep the gun across the surface in smooth passes. Rust and old paint disappear, revealing clean metal.
The vacuum keeps the window clear so they can see every spot that needs more attention. When the batch is done, they let the vacuum clear the dust, open the door, and move the clean parts to the paint or powder coating area. In an afternoon, they’ve prepared parts that would have taken days by hand.
Fabrication Shop Use
Fabricators often need to remove mill scale, rust, or welding discoloration before painting or coating. The SBC420 makes this quick and consistent for parts that fit inside the cabinet. Blasted parts take paint and powder coat better, giving customers a more durable finish.
Engine and Drivetrain Parts
Engine builders and repair shops use blast cabinets to clean brackets, covers, and other components. Use the right media and protect machined surfaces, bearing bores, and threads as needed. Always clean parts thoroughly after blasting to remove any remaining media before reassembly.
Comparing to Open-Air Blasting
Open-air blasting can handle very large items, but it creates a cloud of dust and wastes a lot of media. A cabinet like the SBC420 contains the dust, recycles media within the cabinet, and keeps your shop cleaner. For parts that fit inside, a cabinet is usually the more efficient and cleaner choice.
Choosing the Right Cabinet Size
Blast cabinets come in several sizes. Smaller benchtop cabinets suit very small parts, while large cabinets handle bulky components like wheels and big panels. The SBC420 is a standard-size floor cabinet with a 47.5-inch-wide work area, which fits a broad range of automotive and fabrication parts while staying manageable in most shops. If you regularly blast larger items, Atlas also offers larger cabinets. Our team can help you compare options based on the parts you work with most.
Sizing Your Compressor
The most common problem with blast cabinets is an undersized compressor. The SBC420 requires 15 CFM at 80–100 PSI. Check your compressor’s rated delivery at that pressure, not just its peak rating or tank size. A compressor that can’t keep up will cause pressure to drop and slow your blasting. If you’re unsure, our team can help you confirm whether your compressor is a good match.

What Users Appreciate
Users often mention the attached vacuum and the multiple loading doors as their favorite features. The vacuum keeps the view clear and the shop clean, while the top and side doors make loading parts of different shapes easy. The foot pedal control and sturdy construction round out a cabinet that’s practical for daily use.
Investing in Better Finishes
Paint and powder coat only last as long as the surface underneath is properly prepared. The SBC420 gives you a reliable way to prepare parts consistently, which leads to better adhesion and longer-lasting finishes. For shops and restorers who care about quality, it’s a worthwhile investment.

Getting Started
Contact our team to confirm your air supply, choose media, and arrange freight delivery of the SBC420. We’ll help you get set up so you can start blasting parts right away.
Motorcycle and Powersports Parts
Motorcycle and powersports shops often clean brackets, pegs, levers, and engine covers before refinishing. The SBC420 handles these parts easily, and the side doors make it simple to insert longer items like handlebars or small subframe pieces when they fit. Clean, evenly blasted parts accept paint and powder coat beautifully, helping shops deliver show-quality results.
Home Garage Restorers
For serious hobbyists, a blast cabinet can transform a restoration project. Instead of spending evenings wire-brushing parts, restorers can clean them in minutes. The SBC420 runs on 110V power and fits in many home garages, as long as there’s a compressor that can supply 15 CFM at 80–100 PSI. Its sealed design and attached vacuum help keep dust out of the rest of the garage and the house.
Maintenance Departments
Facility and fleet maintenance teams clean tools, fixtures, and equipment parts regularly. The SBC420 gives them a fast, consistent way to remove rust and grime, extending the life of tools and preparing parts for repair or repainting. Its durable construction holds up to frequent use.
Handling Spent Media and Dust
Over time, media breaks down and needs replacing. Use the bottom gate clean-out to remove spent media, and dispose of it, along with collected dust, according to local regulations. Replace the cartridge filter when airflow drops. Keeping up with these simple tasks ensures consistent blasting performance.
Building a Blasting Workflow
To get the most from the SBC420, set up a simple workflow. Stage dirty parts on a cart or bench beside the cabinet. Blast them in batches, grouping parts that need similar treatment. Move cleaned parts to a separate clean area, then wash or blow them off to remove any remaining media before painting, coating, or reassembly. Keep spare nozzles, gloves, window protectors, and filters nearby so you can swap wear items quickly. With an organized workflow, the cabinet becomes one of the most productive tools in your shop, turning rusty, dirty parts into clean, ready-to-finish components in a fraction of the time manual methods require.
Whether you’re restoring a classic car, preparing parts for powder coat, or cleaning tools and hardware, the SBC420 offers a clean, efficient, and reliable way to get professional results. Contact our team with any questions about air supply, media, or delivery.
Frequently Asked Questions About the SBC420
How big is the work area?
47.5 inches wide, 24 inches deep, and 22.5 inches high.
What air supply does it need?
15 CFM at 80–100 PSI from an external compressor.
Does it include a vacuum?
Yes, an attached dust collector with a cartridge filter.
What media should I use?
Glass bead is recommended (media not included).
How do I load parts?
Through the large top-load door or the dual side-load doors.
What power does it need?
110V.
Support From Ironside Garage
Our team can help you size your compressor, choose media, and plan delivery for the SBC420. Contact us with any questions.
Order the SBC420 Today
The Atlas SBC420 is a proven, powerful sandblast cabinet with vacuum. Learn more on the official Atlas Automotive Equipment website, or explore our car lifts to complete your shop.
Related products
Atlas Extra Large Pressurized Sandblast Cabinet
Atlas Extra Large Pressurized Sandblast Cabinet The Atlas PSBC990 pressurized sandblast cabinet features a higher velocity stream that allows work to be done up to 4 times faster than other sandblast cabinets on the market. The direct pressure system which pneumatically pushes the blast media throug
BendPak Bender
BendPak Bender heavy-duty “Blue-Bullet” exhaust pipe bender. This high-quality bender takes off like a shot and helps you reach your production target every time. Your purchase of the BB-2 comes complete with a die package and a dual-function end-finishing unit for precision OE expansions and flares
Mahle CSP-75 75 Ton Shop Press
Mahle FluidPRO ATX 280 Transmission Fluid Exchange System with Adapters
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft Meet the Portacool APEX™ 1200—a game-changer for mid-sized spaces demanding serious cooling. Delivering a powerful 4,000 CFMs of airflow that spans up to 40 ft., this unit ensures consistent comfort across 1,2

Reviews
There are no reviews yet.