Bendpak 12AP-SRT 12,000‐lb. Capacity ALI Certified / Adaptable Clearfloor / Adjustable Width / Screw Pads / SHORT-RISE

$9,395.00

The Perfect Lift for Tire and Wheel Service The 12AP-SRT from BendPak is a fantastic choice when you don’t need to work underneath vehicles. Whether you’re focusing on detailing or other non-undercarriage tasks, this innovative lift is your go-to choice for efficiency and safety. With its compact de

SKU: IRG0073 Category:
Description

Looking for a reliable two post lift? The Bendpak 12AP-SRT delivers the durability, safety and ease of use that busy service bays demand. This page covers the Bendpak 12AP-SRT features, specifications, installation planning and care so you can buy with confidence.

Bendpak 12AP-SRT Features and Specifications

Specifications
Durable Powder Coat Finish

Expandable Top Beam Accommodates Wide or Narrow Drive-Through Configurations

Power Side Post Supports the Power Unit, the Safety Lock Release Handle and the Lowering Handle

Double-Telescoping Screw Pads Offer Increased Versatility

Padded Overhead Safety Shutoff Bar

Exclusive Bi-Metric™ Arm Design for More Versatile Arm Positioning

Single-Point Safety Release

Drop-End Arms Provide a Lower Pad Height

Dual Hydraulic Direct-Drive Cylinders

Electric / Hydraulic HVLP Power System

Self-Lubricating Dura-Glide UHMW Polyethylene Bearing System

Safety Locks in Each Column Spaced Every 3”

Automatic Arm Restraints Withstand Over 2000-Pounds of Side Force

Heavy-Duty ½” Aircraft-Quality Equalizer Cables

Capacity

Lifting Capacity: 12,000 lbs. (5,443 kg)
Max Capacity / Front Axle: 6,000 lbs. (2,721.5 kg)
Max Capacity / Rear Axle: 6,000 lbs. (2,721.5 kg)
Maximum Capacity per Lift Arm: 3,000 lbs. (1,360 kg)

Dimensions

A – Width Overall: 155 in. (3,937 mm)
B – Base Plate Width: 26.5 in. (674 mm)
C – Post Height: 93.5 in. (2,377 mm)
D – Drive-Thru: 102.25 in. (2,598 mm)
E – Inside Posts: 119 in. (3,026 mm)
F – Outside Posts: 142 in. (3,606 mm)
G – Minimum Height with Pad: 4.25 in. (105 mm)
H – Max. Lifting Height: 46 in. (1,168 mm)
I – Max. Rise: 42.75 in. (1,089 mm)
J – Min. Height with Adapters (5 in + 2.5 in): 11.75 in. (298 mm)
K – Floor Plate Height: 1.5 in. (36 mm)
L – Floor Plate Width: 9.5 in. (240 mm)

Arms & Pads

M – Front Arm Reach (Measured from the Lift Arm Pivot to the Cradle Pad Center Pin): 26 in. min – 55.25 in. max. (659 mm min. – 1,403 mm max.)
N – Rear Arm Reach (Measured from the Lift Arm Pivot to the Cradle Pad Center Pin): 29.25 in. min. – 60 in. max. (745 mm – 1,525 mm max.)

Safety

Safety Lock Positions: 8

Power Unit

Standard Motor: 208-230 VAC, 50/60 Hz, 1 Phase, 5 HP, 23 Amps
Time to Full Rise: ≈45 seconds
Sound Pressure: Lift produces less than 85dB when in operation.
Operating Hydraulic Pressure under Max. Load: 2,170 psi
Special voltages available upon request.

Bendpak 12AP-SRT Photos

Bendpak 12AP-SRT two post liftBendpak 12AP-SRT two post lift view 2Bendpak 12AP-SRT two post lift view 3Bendpak 12AP-SRT two post lift view 4

Why Shops Choose the Bendpak 12AP-SRT

c => `Shop owners pick the ${c.kw} because it turns floor space into productive bay time. A well-built ${c.noun} lets technicians stand upright under the vehicle, reach suspension, exhaust and drivetrain components without creepers, and move from one job to the next faster. Less time on the floor means more billable hours and less fatigue at the end of the day.`

Benefits of a Quality Two Post Lift

Investing in the right two post lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the Bendpak 12AP-SRT

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the Bendpak 12AP-SRT

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the Bendpak 12AP-SRT from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

Bendpak 12AP-SRT FAQs

Do I need special concrete for the Bendpak 12AP-SRT?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Bendpak 12AP-SRT or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the Bendpak 12AP-SRT shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Bendpak 12AP-SRT come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Two Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Bendpak 12AP-SRT is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bendpak 12AP-SRT 12,000‐lb. Capacity ALI Certified / Adaptable Clearfloor / Adjustable Width / Screw Pads / SHORT-RISE”

Your email address will not be published. Required fields are marked *

Shipping & Delivery