BendPak HDS-18EA 18,000-lb. Capacity ALI Certified Alignment Lift / Includes Turnplates and Slip Plates

$28,695.00

A Four-Post Truck Lift for Every Alignment Application BendPak’s largest-capacity alignment lift easily accommodates vehicles up to 18,000 lbs. Of course, it still services smaller sports cars and race cars without a problem. If your shop is busy and can’t afford the space for multiple lifts, you’ll

SKU: IRG0236 Categories: ,
Description

The BendPak HDS-18EA brings proven design and solid construction to your shop. Read on for detailed specifications of the BendPak HDS-18EA, practical setup guidance and the answers to questions our customers ask most often.

BendPak HDS-18EA Features and Specifications

Slip plates

Our rear-seated, free-floating slip plates let you perform wheel alignments on heavy trucks while keeping vehicle suspensions relaxed, securely fitted on the slip plates. This is the best way to perform wheel alignments because it eliminates potential flex and loss of pressure in rear tire walls as a result of old-fashioned alignments that require individual wheel jacking.

Turn plate

BendPak’s galvanized and corrosion-resistant front-alignment turn plates feature dual recessed turn plate pockets that position your turn plates to help position your vehicle with very little effort: your equipment installations (i.e. 3D alignment pads) can be managed breezily.

Dual-hub cable sheaves

BendPak’s cable sheaves are world-class and over-engineered to function for years as though they were brand new. Simply picking up and holding one of these sheaves is convincing enough to see they’re not going to wear out any time soon. Not simply molded chunks of steel to route the cables, they’re heavy, massive and virtually immoveable when installed within the structure. We call our 12″ diameter cable sheaves “supersized” for a reason. They’re located with within the runway along with equally impressive 4″ diameter sheave axles.

Heavy-duty aircraft cable

1/2” diameter, 6 x 25 aircraft-quality stainless-steel lifting cables do their part to make our alignment lifts some of the most robust lifts ever constructed. These cables hoist your lift in the air in just seconds. They’re internally routed, but you can still see the runway through the open side of each column. This lets you see for yourself that BendPak cables remain lubricated during each use and rarely, if ever, show signs of wear.

Adjustable height locking positions

The ability to choose your own working height is essential. BendPak offers multiple locking levels on every car lift we make in order to keep you as comfortable as possible.

Built-in lubrication

Grease nipples lubricate the cable sheaves, keeping all cables and runways operating smoothly. You’ll rarely need to lubricate the grease fittings. We just ask that you perform periodic maintenance as indicated in your owner’s manual. We promise it isn’t much.

Flow restrictor

A lift that utilizes hydraulic systems needs a flow divider to keep the lift platforms rising evenly. Flow dividers also ensure your lift lowers slowly in the unlikely event of a hydraulic failure. This safety feature is non-negotiable for us, so we manufacture it into every alignment lift we make.

Spring-loaded safety locks

Springs engage at the locking points of each column and accommodate for slight slopes in your garage.

Push-button pneumatic lock release

With the locks in place, it’s easy to release them again and get the car lift platform moving. A pneumatic lock release is activated with the push of a button, and it targets all four locks at once. Stainless steel and aluminum pneumatic cylinders keep your truck lift working for many years of reliable service.

Secondary lock system

Cable slack issues are for the last century! BendPak’s cable slack detection acts as a secondary lock system, engaging instantly when slack exceeds operating parameters. The power unit shuts down until the problem can be fixed.

Integrated design

We’re proud to internally route all our cables and runway systems. This provides the best and most appealing user experience, and it increases the lifespan of the alignment lift. Weather and corrosive materials that can spill across the floor in busy service bays should never be a concern. In case of an accident, the workings of your lift are protected from many hazards that present themselves in shops.

Electric-hydraulic power system

An ergonomically placed display underlines BendPak’s commitment to sophisticated technology that’s easy for anyone to get quickly trained on and safely use. The display’s stop and start functions are logically placed alongside the emergency shutoff and warning configurations. If you have any questions about how your lift is operating, the power system display readout is often the first and best place to look.

Non-skid runways

Wet or oily runways are no sweat during lift. The surface tread holds vehicles firmly in place, no matter what.

Longer approach ramps

Alignment lifts are used repetitively in most shops, and oftentimes, many different chassis styles will be lifted in the course of a day. Low-bodied vehicles risk bottoming out if the lift ramps are too short, and larger trucks and SUVs are tricky to maneuver when you have to apply extra gas to climb a steep slope and hit the brake right away to prevent going too far or driving off the platform. Our extended ramps make loading vehicles a worry-free, hassle-free operation.

Flexible protective conduit

All cables, including hydraulic lines and airlines, are protected by a conduit that is tough, durable and non-conducive to electricity. If it’s potentially exposed to the elements, we’ve got it covered. Literally.

Rolling bridge jacks

Turn your alignment lift into a multi-purpose tool for tire changes and brake service. Rolling bridge jacks, which also work on our four-post lifts, engage vehicle frames and lift vehicles off the runways. Two bridge jacks lift the entire vehicle for full-service accessibility. Not having to swap vehicles onto multiple lifts is a huge time-saver in busy shops. Frame contact pads support larger frames (i.e. trucks, SUVs) and each jack features telescoping arms to help reach the lift points on virtually every vehicle type.

Features & Specs

  • 18,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Multi-caster slip plates
  • Spring-loaded automatic safety locks
  • Supersized 12″ diameter cable sheaves
  • Four stainless steel lifting cables
  • Grease nipples on every sheave and axle
  • Single hydraulic under-runway cylinder
  • Integrated hydraulic flow restrictor
  • Durable powder coat finish
  • Push-button pneumatic lock release
  • Secondary lock system on constant guard
  • Enclosed cables, airlines, safety latches
  • Multiple adjustable locking positions
  • Maintenance-free power system
  • Conveniently located controls
  • 12″ x 12″ base plates
  • Non-skid runways
  • Optional rolling jacks available

Capacity

Lifting Capacity*
18,000 lbs. (8,165 kg)
*Max Capacity / Front Axle
9,000 lbs. (4,082 kg)
*Max Capacity / Rear Axle
9,000 lbs. (4,082 kg)

Rise

A – Min. Runway Height:
10.5″ (267 mm)
B – Max. Rise:
60″ (1,524 mm)
C – Max. Lifting Height:
70.5″ (1,791 mm)
Time to Full Rise:
75 seconds

Outside Dimensions

D – Overall Width:
154″ (3,912 mm)
E – Outside Length:
257″ (6,528 mm)
F – Overall Length:
297″ (7,544 mm)
G – Height of Columns:
93″ (2,362 mm)

Inside Dimensions

H – Width Between Columns:
134″ (3,404 mm)
I – Drive-Thru Clearance:
109″ (2,769 mm)

Runways

J – Runway Width:
22″ (559 mm)
K – Length of Runways:
249″ (6,325 mm)
L – Width Between Runways:
38″ (965 mm) or 56″ (1,422 mm)

Alignment

M – Min. 4-Wheel Alignment:
83″ (2,108 mm)
N – Max. 4-Wheel Alignment:
138″ (3,505 mm)
O – Max. 2-Wheel Alignment:
211″ (5,359 mm)

Minimum Wheelbase

Rated Capacity:
185″ (4,699 mm)
75% Capacity:
160″ (4,064 mm)
50% Capacity:
135″ (3,429 mm)
25% Capacity:
110″ (2,794 mm)

Locking

Locking Positions:
9
Lock Spacing:
6

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Shipping

Weight:
6,790-lbs. (3,079 kg)
Dimensions:
265” x 26” x 38” (6,731 mm x 660 mm x 965 mm)

BendPak HDS-18EA Photos

BendPak HDS-18EA alignment liftBendPak HDS-18EA alignment lift view 2BendPak HDS-18EA alignment lift view 3BendPak HDS-18EA alignment lift view 4

BendPak HDS-18EA at a Glance

  • The BendPak HDS-18EA is built for daily professional use.
  • The BendPak HDS-18EA is backed by manufacturer support and documentation.
  • Our team can confirm shipping options for the BendPak HDS-18EA to your location.
  • The BendPak HDS-18EA is a smart fit for shops upgrading their equipment.
  • Every BendPak HDS-18EA order includes help from our product specialists.
  • The BendPak HDS-18EA combines solid construction with simple operation.

Key Highlights of the BendPak HDS-18EA

Here is a quick summary of what stands out on this alignment lift:

  • Springs engage at the locking points of each column and accommodate for slight slopes in your garage.
  • 18,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Multi-caster slip plates
  • Spring-loaded automatic safety locks

Why Shops Choose the BendPak HDS-18EA

c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`

Benefits of a Quality Alignment Lift

Investing in the right alignment lift improves productivity, technician comfort and shop safety. Quality equipment also holds its value, keeps maintenance costs predictable and gives customers confidence in the work your team delivers.

Common Uses for the BendPak HDS-18EA

c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`

Installation and Setup

c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`

Safety and Maintenance Tips for the BendPak HDS-18EA

c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`

Buy the BendPak HDS-18EA from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Alignment Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right alignment lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak HDS-18EA FAQs

Do I need special concrete for the BendPak HDS-18EA?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak HDS-18EA or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the alignment lift correctly, which protects your investment and your technicians.

How is the BendPak HDS-18EA shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak HDS-18EA come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak HDS-18EA 18,000-lb. Capacity ALI Certified Alignment Lift / Includes Turnplates and Slip Plates”

Your email address will not be published. Required fields are marked *

Shipping & Delivery