BendPak XPR-15CL-192 Extra Tall, 15,000 Lb Capacity, ALI Certifed Clearfloor, Standard Arms

$17,895.00

When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-15CL-192, for instance, has an astounding 15,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever bef

SKU: IRG0088 Category:
Description

The BendPak XPR-15CL-192 is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the BendPak XPR-15CL-192, along with setup tips, maintenance advice and answers to common questions.

BendPak XPR-15CL-192 Features and Specifications

    • 15,000-lb. lifting capacity
    • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
    • Padded overhead safety shutoff bar
    • Taller column height provides greater overhead clearance
    • Single-piece columns / model XPR-15CL
    • Bolt-on column extensions / model XPR-15CL-192
    • Single-point safety release
    • Drop-end arms provide a lower pad height
    • Dual hydraulic direct-drive cylinders
    • Oversized 53″ tall carriage for superior strength and durability
    • Electric / hydraulic power system
    • Oversized A36 steel base plate
    • Self-lubricating dura-glide UHMW polyethylene bearing system
    • Safety locks in each column spaced every 3″
    • Two-stage telescoping front and rear arms
    • Automatic arm restraints
    • Heavy-duty 1/2″ aircraft-quality equalizer cables
    • 6” diameter machined steel cable sheaves reduces cable fatigue
    • 8-piece truck and van adapter set STANDARD
    • Frame cradle pads STANDARD
    • Round rubber contact pads STANDARD
    • ALI certified

 

MODEL XPR-1​5CL-192
Lifting Capacity* 15,000 ​lbs. / 6,804 ​kg.
*Max Capacity / Front Axle 7,500 ​lbs. / 3,402 ​kg.
*Max Capacity / Rear Axle 7,500 ​lbs. / 3,402 ​kg.
A – Height Overall: 192.7″ / 4,895 mm*
B – Width Overall (Outside of Base Plate): 155″ / 3,937 mm.
C – Width (Outside of Columns): 144″ / 3,658 mm.
D – Floor To Overhead Switch: 187.7″ / 4,768 mm.*
E – Inside Columns: 120″ / 3,048 mm.
F – Reach (Front Arm Min.): 39″ / 991 mm.
G – Reach (Front Arm Max.): 60″ / 1,524 mm.
H – Reach (Rear Arm Min.): 39″ / 991 mm.
I – Reach (Rear Arm Max.): 60″ / 1,524 mm.
J – Min. Pad Height: 5″ / 127 mm.
K – Rise: 69″ / 1,753 mm.
L – Max Lift Height (Pad Only): 74″ / 1,880 mm.
M – Max Lift Height (6″ Adapter): 80″ / 2,032 mm.
N – Drive-Thru Clearance: 106″ / 2,692 mm.
Motor (**) 220 VAC / 60 Hz. 1Ph.
Time of full Rise: 45 Seconds
Max Load Per Arm: 3,750​ lbs. / 1,701 ​kg.

BendPak XPR-15CL-192 Photos

BendPak XPR-15CL-192 two post liftBendPak XPR-15CL-192 two post lift view 2BendPak XPR-15CL-192 two post lift view 3BendPak XPR-15CL-192 two post lift view 4

Key Highlights of the BendPak XPR-15CL-192

Here is a quick summary of what stands out on this two post lift:

  • 15,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Padded overhead safety shutoff bar
  • Taller column height provides greater overhead clearance
  • Single-piece columns / model XPR-15CL

Why Shops Choose the BendPak XPR-15CL-192

c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`

Benefits of a Quality Two Post Lift

The best two post lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.

Common Uses for the BendPak XPR-15CL-192

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the BendPak XPR-15CL-192

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the BendPak XPR-15CL-192 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official BendPak website.

BendPak XPR-15CL-192 FAQs

Do I need special concrete for the BendPak XPR-15CL-192?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the BendPak XPR-15CL-192 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the BendPak XPR-15CL-192 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the BendPak XPR-15CL-192 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Two Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The BendPak XPR-15CL-192 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BendPak XPR-15CL-192 Extra Tall, 15,000 Lb Capacity, ALI Certifed Clearfloor, Standard Arms”

Your email address will not be published. Required fields are marked *

Shipping & Delivery