Challenger CL10V3
$7,321.00
Challenger’s CL10V3 model features our exclusive Versymmetric® technology to allow you to service the widest range of vehicles and maximize your bottom line. 3-stage front and 3-stage rear arms with our industry-first directSPOT™ design eliminate the need to shuffle a vehicle back and forth to swing
The Challenger CL10V3 is a professional-grade two post lift built for shops that need dependable performance every day. Below you will find the full features and specifications of the Challenger CL10V3, along with setup tips, maintenance advice and answers to common questions.
Challenger CL10V3 Features and Specifications
- 10,000 lb. lift capacity
- Versymmetric® offset front arms provide directSPOT™ to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential
- Oversized 5 in. diameter pulley and heavy duty 5/16 in. cable reduces stress on equalization system and increases cable life
- 48 in. elongated carriage design increases lift life
- Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available
- Padded overhead shut off system prevents vehicle damage
- Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
- Fully gusseted base plate design increases column rigidity
- Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life
- Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
- Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
- Premium powder coat finish provides long-lasting durability
Specs
| SKU# | 6010124 |
|---|---|
| Lifting Capacity | 10,000 lbs. (4,536 kg) |
| Lifting Configuration | Versymmetric (Symmetric & Asymmetric) |
| Arms | 3-stage front/3-stage rear |
| Rise Height | 74.125” |
| Overall Height | 134” / 140” |
| Overall Height (Cylinder Extended) | 143” |
| 2’ Height Extension Available | Yes |
| 3’ Height Extension Available | Yes |
| Overall Width | 138.5” / 143” |
| Drive-Thru Clearance | 100” / 104.5” |
| Floor to Overhead Switch | 128.5” / 134.5” |
| Front Arm Reach | 20” – 42” |
| Rear Arm Reach | 37.625” – 60” |
| Screw Pad Height | 3.875” – 6.125” |
| Inside Columns | 110” / 114.5” |
| Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph |
| Speed of Rise | 38 s |
| Ceiling Height Required | 12′ |
| ALI/ETL Certified | Yes |
Challenger CL10V3 Photos




Key Highlights of the Challenger CL10V3
Here is a quick summary of what stands out on this two post lift:
- 10,000 lb. lift capacity
- 48 in. elongated carriage design increases lift life
- Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available
- Padded overhead shut off system prevents vehicle damage
- Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
Why Shops Choose the Challenger CL10V3
c => `Choosing the right ${c.noun} is about capacity, footprint and access. The ${c.kw} balances all three, giving you room to work around the vehicle while keeping the lift itself compact enough for real-world bays. It is a practical upgrade over floor jacks and stands for anyone who lifts vehicles every day.`
Benefits of a Quality Two Post Lift
Reliable equipment is one of the best investments a shop can make. A dependable two post lift cuts down on wasted time, reduces repair costs over the life of the machine and helps your team produce consistent, professional results.
Common Uses for the Challenger CL10V3
c => `From quick oil changes to full undercarriage repairs, the ${c.kw} supports a wide range of service work. It is a smart choice for independent repair shops, fleet maintenance facilities, dealerships, restoration shops and enthusiasts who want professional-grade access at home.`
Installation and Setup
c => `Plan your bay layout before the ${c.kw} is delivered. Measure door openings, overhead clearance and the space needed to drive on and off safely. Check the electrical supply for the power unit and confirm your floor meets the anchoring specifications listed in the installation manual. Professional installation is strongly recommended for every lift.`
Safety and Maintenance Tips for the Challenger CL10V3
c => `Inspect the ${c.kw} daily before use: check cables, hoses, locks, arms and anchors for wear or damage. Always engage the mechanical safety locks before working under a vehicle and never exceed the rated capacity. Lubricate moving parts, check hydraulic fluid and have the lift inspected annually by a qualified inspector to keep it working safely for years.`
Buy the Challenger CL10V3 from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.
For product manuals, technical documentation and manufacturer details, visit the official Challenger website.
Challenger CL10V3 FAQs
Do I need special concrete for the Challenger CL10V3?
Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Challenger CL10V3 or contact us and we will confirm the requirements for your floor.
Is professional installation recommended?
Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.
How is the Challenger CL10V3 shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Challenger CL10V3 come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Choosing the Right Two Post Lift
When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Challenger CL10V3 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.
It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.
What to Expect After You Order
After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.
Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.
Related products
Atlas 7K-Kwik-Bay Portable Mid-Rise 7000 lbs Capacity Scissor Lift
The Atlas® 7K Kwik Bay is a free standing 7,000 lb. capacity portable scissor lift. The Atlas® 7K Kwik Bay is the perfect lift for Commercial Quick Service Bays and wheel service specialists that need extra lifting height. This portable lift easily raises a 7,000 lb. car or truck to a comfortable wo
BendPak LR-60P Car Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift We’re not just talking a big game; we’re offering the first open-center mid-rise lift ever made. Decades of experience have taught us a thing or two about vehicle lift points. A car lift with longer platforms means you get to lift more vehicle t
Dannmar DLR-6P Car Lift
Dannmar DLR-6P Car Lift The DLR-6P is a high-quality low-rise lift from Dannmar that helps you move along on wheels! Its high-density roller wheels are the secret to how the DLR-6P is such a convenient portable low-rise lift. With a mobile lift you’ll gain the ability to easily relocate your lift wi
Forward Lift 6000MRL 6000 lbs Capacity Mid-Rise Lift
Rotary RLP77 7700 lb ALI Certified Low Profile Double Scissor Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.