PL-6000DC

$9,095.00

The PL-6000DC is a two-post parking lift with a car storage capacity of up to 6,000 lbs. This expertly crafted lift has been designed to be ganged together with shared columns, which allows you to fit more units into a smaller space. This lift can be installed either indoors or outdoors.

SKU: IRG0338 Categories: ,
Description

The BendPak PL-6000DC is a 6,000 lb. capacity two-post parking lift that stacks two vehicles in a single parking space. Built with commercial-grade construction, a galvanized anti-slip platform, and a quiet overhead power unit, the PL-6000DC works indoors or outdoors for homes, developments, dealerships, and parking operators.

BendPak’s PL-6000DC is a high-quality two-post parking lift that is capable of storing cars weighing up to 6,000 lbs. This parking lift can easily accommodate a wide variety of vehicles including SUVs, sedans, as well as sports cars. The PL-6000DC is a great combination of being both a short-term parking solution, as well as a long-term solution. This lift was crafted to suit the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. The PL-6000DC can be either installed indoors or outdoors.

Features

  • Ganged column design allows multiple installations in minimum space
  • Commercial grade design and construction
  • Galvanized and corrugated anti-slip platform
  • Freestanding design when ganged two or wide
  • Overhead power unit provides smooth quiet hydraulic operation
  • Designed for installation on typical parking surfaces
  • Platform can be stopped at different heights to fit various vehicles and ceiling heights
  • Full width channel-locked center panels protect lower vehicle
  • Wide deck platform accommodates pickups, vans and cars.
  • Dual direct-drive hydraulic cylinders
  • Automatic safety lock combined with anti-fall device hold platform securely
  • Maintenance free composite carriage bearings
  • Electric key switch for security and safety
  • Automatic shut-off when operator releases key switch
  • Manual lock release available in case electricity failure (OPTIONAL)
  • Hydraulic overloading protection

Specs

SKU# 5175427
Lifting Capacity 6,000 lbs. (2,722 kg)
Overall Height 131” (3327.4 mm)
Overall Length 148.25” (3,766 mm)
Overall Width 100.25” (2,547 mm)
Lifting Height 82.5” (2,100 mm)
Usable Platform Width 82.5” (2,100 mm)
Electrical Required 220-420V, 1 or 3 Phase , 50/60Hz
Control Power 24V
Lock Release Electric auto release
Power Pack 2.2kw hydraulic power pump
Lifting / Lowering Time 50 / 45 sec.

PL-6000DC Features

  • 6,000 lb. lifting capacity
  • Two-post (dual-column) design
  • Ganged column design allows multiple installations in minimum space
  • Commercial-grade design and construction
  • Galvanized, corrugated anti-slip platform
  • Freestanding design when ganged two or more wide
  • Overhead power unit for smooth, quiet hydraulic operation
  • Designed for typical parking surfaces, indoors or outdoors
  • Platform stops at different heights for various vehicles and ceilings
  • Full-width channel-locked center panels protect the lower vehicle
  • Wide deck accommodates pickups, vans, SUVs, and cars

Double Your Parking in One Space

The concept is simple. Drive one vehicle onto the platform, raise it, and park a second vehicle underneath. The PL-6000DC turns one parking space into two. For homeowners with an extra car, buildings with limited parking, or dealerships managing inventory, that’s an immediate gain in capacity without construction.

Short-Term and Long-Term Parking

The PL-6000DC works well for mixed parking needs. The vehicle on the platform is usually one that’s stored longer, such as a seasonal car, a classic, or inventory. The space below is for the vehicle used most often. This setup keeps everyday access simple while storing a second vehicle efficiently.

Why a Two-Post Parking Lift?

Two-post parking lifts like the PL-6000DC have a compact footprint compared with four-post designs, because there are only two columns. That can make them easier to fit into tight spaces, and it leaves more open area around the lower vehicle for getting in and out. The overhead power unit keeps the floor clear, too.

Protecting the Vehicle Below

Full-width channel-locked center panels sit under the platform’s vehicle. They help keep drips and debris from falling onto the car parked below, a key feature for any stacked parking arrangement.

PL-6000DC

Indoor or Outdoor Installation

The PL-6000DC is designed for typical parking surfaces and can be installed indoors or outdoors. The galvanized, corrugated platform resists corrosion and provides traction, which makes it suitable for open-air lots, carports, and covered structures as well as garages.

Who Should Buy the PL-6000DC

  • Homeowners who need room for an extra vehicle
  • Real estate developers and architects planning parking
  • Engineers designing high-density parking areas
  • Automotive dealers storing inventory
  • Commercial parking operators
  • Collectors and hobbyists with project or seasonal cars

See more parking and storage options in our car lifts catalog.

Ganged Installations

When you need more than one parking lift, the PL-6000DC supports a ganged column design. Lifts are installed side by side, with additional units sharing a column with their neighbor. This saves space between platforms and makes it possible to install multiple lifts in minimum space. When ganged two or more wide, the system is designed as freestanding. Always follow BendPak’s installation instructions and local codes.

Adjustable Platform Heights

The platform can be stopped at different heights. That lets you fit a range of vehicles underneath and work within your ceiling height if you’re installing indoors. Choose the lowest setting that gives the lower vehicle comfortable clearance, so the upper vehicle stays well within your available height.

Quiet, Smooth Operation

The overhead power unit provides smooth and quiet hydraulic operation. That’s especially valuable in residential settings and customer-facing spaces such as dealerships and hotels, where noise matters.

PL-6000DC front view

How to Use the PL-6000DC

  1. Lower the platform fully.
  2. Drive the upper vehicle onto the platform and center it.
  3. Set the parking brake and turn off the engine.
  4. Raise the platform to the chosen height and allow it to rest on the locks.
  5. Park the second vehicle in the space below.
  6. To retrieve the upper vehicle, move the lower vehicle first, then lower the platform.

Safety Guidelines

Never exceed 6,000 lbs. on the platform. Always make sure the platform is resting on its locks before parking underneath. Only trained users should operate the lift. Keep people clear during raising and lowering, and inspect the lift regularly. Follow BendPak’s operating manual at all times.

Maintenance Tips

  • Inspect hydraulic hoses and fittings for leaks.
  • Check the overhead power unit’s fluid level.
  • Confirm the locks engage properly at each height.
  • Keep the platform clean for good traction.
  • Check center panels and fasteners for security.
  • Follow the manufacturer’s maintenance schedule.

PL-6000DC for Home Garages

Many families have more vehicles than garage spaces. A project car, a convertible, a classic, or a second family car often ends up sitting outside. The PL-6000DC solves that by stacking one vehicle above another in the same space. The upper vehicle stays protected and out of the way, while the daily driver parks underneath for easy access. If you have the ceiling height, it’s one of the quickest ways to add parking at home.

PL-6000DC for Developers and Architects

Parking requirements can drive the size and cost of a building project. Mechanical parking lifts like the PL-6000DC can help meet those requirements in less space, freeing up area for other uses. The ganged column design makes it straightforward to plan rows of lifts, and the commercial-grade construction is built for regular use in residential and mixed-use developments.

PL-6000DC side view

PL-6000DC for Dealerships

Dealerships often need to store more vehicles than their lots can hold. Parking lifts allow them to stack inventory, keeping more vehicles on-site and organized. The wide deck accommodates pickups, vans, SUVs, and cars, giving staff flexibility in which vehicles go on top.

PL-6000DC for Parking Operators

For parking operators, more stalls means more revenue from the same property. The PL-6000DC increases capacity without building additional levels. Long-term customers can be assigned the upper platform, while short-term customers park below. The galvanized platform suits outdoor lots as well as covered garages.

Planning Your Space

Before ordering, measure your available width, length, and, for indoor installs, ceiling height. Consider the vehicles you’ll park on the platform and underneath. Check the parking surface condition and plan for power to the overhead unit. For outdoor installs, think about drainage, lighting, and snow removal. Our team can help you review these points.

Built for Commercial Use

The PL-6000DC features commercial-grade design and construction. It’s built to handle regular daily cycles in busy buildings and lots, and with routine maintenance it can provide years of reliable service.

PL-6000DC vs. a Four-Post Parking Lift

Four-post parking lifts support the vehicle on two runways between four columns. They’re very stable and popular for home use. The PL-6000DC, with its two-post design and a single wide platform, takes up less space at the corners and can be ganged in rows with shared columns. For commercial projects and tight spaces, that can make the PL-6000DC a more efficient choice. For home garages, both styles work well, and the best option depends on your space and how you’ll use the lift.

PL-6000DC detail

PL-6000DC vs. Expanding Your Garage

Building an addition or a new garage can take months and cost far more than a parking lift. The PL-6000DC uses vertical space you already have, so you can add a parking space in days instead of months, with no foundation work beyond meeting the lift’s surface requirements.

Lighting, Signage, and Training

Good lighting helps drivers line up on the platform and park accurately underneath. Clear signage with weight and height limits prevents mistakes. In commercial settings, train every operator on raising, lowering, and lock checks. These simple steps keep a PL-6000DC installation safe and efficient.

Long-Term Storage Tips

If a vehicle will sit on the platform for a long time, keep the battery on a maintainer, check the tire pressure from time to time, and look for any leaks. The center panels help protect the vehicle below, but periodic checks keep both vehicles in great condition.

A Day With the PL-6000DC

Picture a typical day in a home with the PL-6000DC. In the morning, the daily driver backs out from under the platform and heads to work. The weekend car stays safely on top, protected from weather and door dings. In the evening, the daily driver parks underneath again. On Saturday, when it’s time for a drive in the weekend car, the daily driver is moved aside, the platform is lowered, and the weekend car rolls off. It’s a simple routine that quickly becomes second nature.

In a commercial setting, the routine is similar but on a larger scale. Trained staff manage which vehicles go on top and which park below, making the most of every stall and keeping vehicles moving smoothly in and out.

Choosing the Right Parking Height

Set the platform height based on the tallest vehicle you’ll park underneath, plus a comfortable safety margin. Then confirm that the vehicle on top still clears your ceiling, beams, lights, or garage door opener. Post the chosen height near the controls so every user follows the same setting. If your vehicles change, you can adjust the height to match.

PL-6000DC in use

Weather-Ready Construction

For outdoor use, the galvanized, corrugated platform is a key advantage. Galvanizing helps resist rust, and the corrugated surface gives tires better grip in wet conditions. Still, it’s wise to clear snow and ice before driving onto the platform and to inspect hoses and electrical connections more often in harsh climates. With sensible care, the PL-6000DC can provide dependable parking all year round.

Growing With Your Needs

Start with one PL-6000DC and add more as your needs grow. Thanks to the ganged column design, later units can be installed alongside the first with shared columns, keeping the row compact. This makes the system a flexible long-term investment for both homes and businesses.

Delivery and Installation Planning

Parking lifts ship by freight and are heavy, so planning ahead makes delivery easier. Make sure there is a clear path to your installation area and enough help or equipment to unload. Confirm your parking surface is level and in good condition, and that power is available for the overhead unit. If you’re installing indoors, measure ceiling height at the exact spot, including any overhead obstructions. If you’re installing outdoors, think about drainage, lighting, and how vehicles will approach the lift. Our team can help you work through a checklist so installation day goes smoothly.

Why Choose BendPak

BendPak is one of the best-known names in parking and service lifts. The PL-6000DC reflects the company’s experience serving developers, dealerships, parking operators, and homeowners. Its commercial-grade build, practical features, and flexible installation options make it a dependable choice for anyone who needs more parking.

What Owners Appreciate

Owners often mention how much calmer their garage feels once every vehicle has a place. No more shuffling cars in the driveway, no more covering a classic outside, and no more wondering where to put a second car. The PL-6000DC gives each vehicle a protected spot and keeps the daily driver easy to reach. For businesses, the added capacity can make a real difference in how many customers or vehicles they can serve.

Getting Comfortable With Your PL-6000DC

When your lift is first installed, take time to learn how it works before using it every day. Start with an empty platform and practice raising and lowering it so you understand how the locks engage. Then drive a familiar vehicle onto the platform slowly, center it, and set the parking brake. Raise it a short distance, step back, and check that everything looks level and secure before going higher. Once you’re comfortable, set your normal parking height and try parking the lower vehicle underneath. After a few cycles, you’ll know exactly how much room you have and how to position each vehicle quickly.

In a commercial setting, use this same process as part of staff training. A careful start builds safe habits that last for the life of the lift.

Small Footprint, Big Impact

It’s easy to overlook how much a single additional parking space can matter. For a homeowner, it might mean keeping a cherished car out of the weather. For a building, it might mean meeting parking requirements without costly construction. For a dealership or operator, it can mean more vehicles stored and more customers served. The PL-6000DC delivers that extra space with a compact two-post design that fits where many other solutions can’t.

Whether you need one extra space at home or dozens across a commercial property, the PL-6000DC provides a dependable, efficient, and proven way to park more vehicles in less space, with the quality you expect from BendPak and support from our team every step of the way.

Contact us today for help choosing and planning your PL-6000DC installation.

Frequently Asked Questions About the PL-6000DC

What is the capacity of the PL-6000DC?

It is rated for 6,000 lbs.

Can it be installed outdoors?

Yes. It can be installed indoors or outdoors on typical parking surfaces.

What vehicles fit on the platform?

The wide deck accommodates pickups, vans, SUVs, sedans, and sports cars within the rated capacity.

Can multiple lifts be installed together?

Yes. The ganged column design allows multiple installations in minimum space.

Is it noisy?

The overhead power unit provides smooth, quiet hydraulic operation.

Does it protect the car underneath?

Full-width channel-locked center panels help protect the lower vehicle.

Support From Ironside Garage

Our team can help you plan your layout, check dimensions, and coordinate freight delivery for the PL-6000DC. Contact us with any questions.

Order the PL-6000DC Today

The BendPak PL-6000DC is a proven, powerful way to add parking without adding space. Learn more on the official BendPak website.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PL-6000DC”

Your email address will not be published. Required fields are marked *

Shipping & Delivery