QuickJack 5000TL 5,000 Lb. Capacity Portable Car Lift
$1,925.00
QuickJack is constantly improving and evolving to fit your automotive needs in the garage or on the track. 5000TL is the highly-anticipated sequel to the most popular automotive tool to ever hit the home garage or auto repair shop. With the ability to lift an extra 3-inches, 5000TL portable car lift
The QuickJack 5000TL is a 5,000 lb. portable car lift that raises vehicles up to 24 inches in about 30 seconds. With 70-inch frames, a 3-inch lowered height, dual-position automatic safety locks, and simple one-handed pendant control, the 5000TL is a favorite for home garages, track days, and small shops.
Features
Automatic safety locks
Features dual-position automatic safety locks on each TL frame. As the frames rise, these locks glide securely into place at mid-rise and full-rise. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.
Increased lifting height
QuickJack TL models are capable of lifting an extra 3-inches making it easier to perform vehicle maintenance tasks that are both routine and more involved. The extra room gives you more ability and versatility under the vehicle, while doing so in added comfort.
One-handed operation
By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during lifting.
Accessories to increase versatility
Most QuickJack accessories were developed from customer suggestion and need. We offer many different lifting options and configurations to customize your QuickJack experience to fit your needs and specifications.
Tech specs

Lifting capacity
Lowered height
Lifting height
Lift point spread
Frame dimensions (ea.)
Other specs
73.5″ (L) x 15.25″ (W) x 5″ (H)
(1,869 mm x 385 mm x 129 mm)
What’s inside?
5000TL Left Frame Assembly
5000TL Right Frame Assembly
1x Hydraulic power unit with control
4x Medium rubber lift blocks (2″)
4x Tall rubber lift blocks (3″)
2x Short hydraulic hoses
2x Long hydraulic hoses
2x Frame-positioning handles
Fittings and thread tape for setup
Instruction manual
Requirements:
Up to 3 liters of Automatic Transmission Fluid
Air source to inflate air cylinders up to 50 PSI
Assembly tools
Note: QuickJack is shipped in three boxes
5000TL Specifications
- Lifting capacity: 5,000 lbs.
- Maximum lift height: 24 inches (up to 26.75 inches with adapters and pin)
- Lift point spread: 37 to 60 inches
- Frame size (each): 70 inches long, 11 inches wide, 3 inches tall lowered
- Frame weight: 78 lbs. each
- Power: 110V, 60Hz, single phase
- Time to full rise: about 30 seconds
- Power unit weight: 15 lbs.
What’s in the Box
- Left and right 5000TL frame assemblies
- Hydraulic power unit with control
- Four medium (2-inch) and four tall (3-inch) rubber lift blocks
- Two short and two long hydraulic hoses
- Two frame-positioning handles
- Fittings, thread tape, and instruction manual
For setup you’ll also need up to 3 liters of automatic transmission fluid, an air source that can supply up to 50 PSI, and basic assembly tools.
Why Home Mechanics Love the 5000TL
Jack stands have been the go-to for DIY car work for decades, but they’re slow and take up space around the car. The 5000TL replaces them with two low frames that lift a whole side of the vehicle at once. Slide the frames under the car, place the rubber blocks at the lift points, and press the button. In about 30 seconds the car is in the air with the center wide open for creepers, drain pans, and tools.
When you’re done, the frames come out and stand against the wall, leaving your garage free for parking.
Automatic Safety Locks
Each 5000TL frame has dual-position automatic safety locks. As the frames rise, the locks glide into place at mid-rise and full-rise. To lower, simply flip the lock bar and the lift is ready for a smooth descent. These mechanical locks mean the car rests on steel while you work, not just on hydraulic pressure.
Extra Lift Height
QuickJack TL models lift about 3 inches higher than earlier versions. That extra room makes routine work more comfortable and gives you more flexibility on bigger jobs. With adapters and the pin, the 5000TL reaches up to 26.75 inches.

One-Handed Operation
The 5000TL uses a handheld pendant control. Hold it in one hand and keep the other hand free to guide the car or steady yourself. There’s no cranking and no bending over a jack handle while the vehicle rises.
Fits a Wide Range of Cars
A lift point spread of 37 to 60 inches lets the 5000TL reach the jacking points on many compact cars, sports cars, sedans, and small SUVs up to 5,000 lbs. Always check your vehicle’s manual for the correct lift points, and choose the block height that gives the best contact.
Accessories for More Versatility
Many QuickJack accessories were developed from customer feedback. Options such as pinch-weld blocks, wall hangers, and adapters let you customize the 5000TL for your vehicles and your garage.
Who the 5000TL Is For
- DIY owners ready to move beyond jack stands
- Track day and autocross drivers
- Owners of compact cars, sports cars, and sedans
- Garages with low ceilings or no room for a post lift
- Detailers who need fast access to wheels and lower panels
- Small shops that need a portable extra lift
Need more capacity or longer frames? See our full range of portable car lifts.
Setting Up the 5000TL
- Assemble the frames and fill the power unit with automatic transmission fluid.
- Connect the hoses and bleed the system following the manual.
- Park on a flat, level, hard surface and set the parking brake.
- Use the positioning handles to slide one frame under each side of the car.
- Place the medium or tall rubber blocks under the lift points.
- Raise a few inches, check each block, then lift to full height so the locks engage.

Safety First
Always make sure the 5000TL is resting on its automatic safety locks before you work under the vehicle. Never exceed the 5,000 lb. capacity. Keep children and pets clear while lifting, chock the wheels when working on one end, and inspect hoses and blocks before every use. Follow the QuickJack operating manual every time.
Jobs You Can Do With the 5000TL
- Tire rotations and seasonal wheel swaps
- Brake pads, rotors, and calipers
- Oil and filter changes
- Suspension and coilover installs
- Exhaust repairs and upgrades
- Underbody cleaning and inspections
Where to Use It
The 5000TL needs a hard, flat, level surface such as concrete or firm asphalt. Avoid gravel, grass, dirt, and slopes. Leave room on each side to open doors, and keep the area well lit and free of clutter.
Maintenance Tips
- Inspect hoses and fittings for leaks before each use.
- Keep quick-connect couplers clean and capped.
- Check the ATF level in the power unit as directed.
- Replace worn or torn rubber blocks.
- Store the frames upright, ideally on wall hangers.
5000TL vs. Jack and Stands
With jack stands, you lift and support each corner one at a time. The 5000TL lifts one whole side in a single motion and locks it in place automatically. Setup is fast, the center stays open, and you’ll feel more confident under the car. For anyone who works on their own vehicles regularly, it’s a big upgrade.

5000TL vs. a Permanent Lift
A two-post or four-post lift needs high ceilings, a thick slab, and permanent floor space. The 5000TL needs only a level floor. It handles most routine maintenance, stores against the wall, and travels with you to the track or a new home.
Taking the 5000TL to the Track
At 78 lbs. per frame and with a 15 lb. power unit, the 5000TL is portable enough to bring to track days. Between sessions, lift the car, swap wheels, check brakes, and lower it again in minutes. With access to a 110V outlet, you’ll have your own pit lift wherever you race.
Choosing the Right Lift Blocks
The 5000TL comes with two sets of rubber lift blocks: four medium blocks at 2 inches and four tall blocks at 3 inches. Choosing the right height helps you get solid contact at each lift point. Lower cars often work best with the medium blocks, while vehicles with more ground clearance may need the tall blocks. Raise the car a few inches, walk around to inspect each block, and adjust if needed before lifting higher.
For unibody cars with pinch-weld lift points, consider adding QuickJack pinch-weld blocks. They cradle the seam and help prevent bending or crushing.
Understanding Lift Points
Every vehicle has specific lift points designed to carry its weight safely. On many modern cars, these are pinch-weld seams under the rocker panels. Others use reinforced pads or frame sections. Your owner’s manual shows exactly where they are. Take a picture of that page and keep it in your garage so you can line up the 5000TL correctly every time.
Planning Your Garage Setup
Pick a level spot with room to open the doors on both sides of the car. Keep the power unit near a 110V outlet, and route the hoses so they won’t be stepped on. Wall hangers keep the frames off the floor and close by. Bright overhead lighting makes under-car work much easier. With a simple, organized setup, using the 5000TL becomes a quick routine.

Owner Tips
- Mark the best frame positions on the floor with tape.
- Keep blocks, hoses, and the pendant in one labeled bin.
- Raise the car a little at first and check every contact point.
- Use wheel chocks when working on one end.
- Wipe the frames down after use, especially after track days.
Save Money on Maintenance
Tire rotations, brake pads, and oil changes are some of the most common reasons people visit a shop. With the 5000TL, those jobs become quick and comfortable in your own garage. Over time, the savings on labor can go a long way toward paying for the lift, and you’ll know exactly how the work was done.
A Lift That Grows With You
Many owners start with simple jobs on the 5000TL and quickly move on to bigger projects like suspension upgrades and exhaust work. Because it’s portable, the lift also adapts as your needs change, whether that’s a new garage, a new car, or a new hobby like track driving.
A Closer Look at the TL Design
The “TL” in 5000TL stands for the taller-lifting generation of QuickJack frames. These models were designed to give you more room under the car without making the frames bulky. At only 3 inches tall when lowered and 11 inches wide, the frames slide under most cars easily. Yet when raised, they give you up to 24 inches of working height. That balance of low profile and useful height is what makes the 5000TL so practical for real home garages.
The frames are also designed to be handled by one person. The included positioning handles let you slide each frame into place under the car without reaching underneath, which keeps your hands clean and your back happy.
Built for Everyday Use
Whether you lift your car once a month or several times a week, the 5000TL is built to keep up. Its steel frames, dependable hydraulics, and durable rubber blocks are designed for repeated use. With simple care, such as checking fluid and hoses, keeping couplers clean, and replacing worn blocks, your lift will stay ready for years of wheel swaps, brake jobs, and oil changes.

Vehicles That Pair Well With the 5000TL
The 5000TL is a strong match for compact cars, hatchbacks, coupes, sports cars, mid-size sedans, and many small crossovers that weigh 5,000 lbs. or less. If your vehicle’s lift points fall within the 37 to 60 inch spread, the 5000TL should reach them comfortably. For heavier vehicles or wider lift points, consider a higher-capacity or extended QuickJack model, and our team can help you compare.
Your First Lift With the 5000TL
Start with a simple job like a tire rotation. Find your lift points, choose the right blocks, slide the frames into place, and raise the car slowly while checking each contact. Once it’s at full height and resting on the locks, you’ll see just how much easier it is to work. After a few lifts, the whole process takes only minutes, and you’ll wonder how you ever managed without it.
Comparing the 5000TL to Other QuickJack Models
QuickJack offers several capacities and frame lengths. Smaller models are lighter and easier to carry but lift less weight. Larger models such as the 6000TL, 7000TL, and the 8000-series lifts handle heavier vehicles and, in extended versions, wider lift points. The 5000TL sits in a sweet spot for many drivers: it has enough capacity for most cars, a useful 24-inch lift height, and frames that are still easy to move and store.
If you own one or two passenger cars and want a lift that is simple to set up and put away, the 5000TL is often the right choice. If you also own a large SUV or pickup, a higher-capacity model may serve your whole household better. Tell us what you drive and our team will point you in the right direction.
Peace of Mind Under Your Car
Many people buy the 5000TL for one main reason: they want to feel safer working under their car. Automatic mechanical locks, a stable two-frame design, and solid rubber blocks give you that confidence. Combined with good habits like checking block contact and keeping the area clear, the 5000TL makes under-car work safer and far more comfortable than working from jack stands on the floor.
For drivers who want fast, safe, and affordable access to the underside of their car without giving up garage space, the 5000TL is one of the smartest tools you can buy. It sets up in minutes, lifts in seconds, and stores neatly when the job is done, making regular maintenance something you actually look forward to.
Frequently Asked Questions About the 5000TL
How much can the 5000TL lift?
It is rated for 5,000 lbs.
How high does it lift?
Up to 24 inches, or 26.75 inches with adapters and pin.
How fast does it lift?
The 5000TL reaches full rise in about 30 seconds.
What power does it need?
It runs on standard 110V, 60Hz, single-phase power.
How heavy are the frames?
Each frame weighs 78 lbs.
What do I need for setup?
Up to 3 liters of automatic transmission fluid, an air source up to 50 PSI, and basic tools.
Support From Ironside Garage
Our team helps customers pick the right lift, confirm vehicle fit, and choose accessories. Reach out with any questions about the 5000TL before or after your order.
Order the 5000TL Today
The 5000TL is a proven, powerful, and portable lift for home and track. Learn more on the official QuickJack website, or explore our full car lifts collection.
Related products
BendPak LR-60P Car Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift
BendPak MDS-6LP 6000 lb Capacity Mid-Rise Scissor Lift We’re not just talking a big game; we’re offering the first open-center mid-rise lift ever made. Decades of experience have taught us a thing or two about vehicle lift points. A car lift with longer platforms means you get to lift more vehicle t
BendPak MDS-6LP Car Lift
BendPak MDS-6LP Car Lift The MDS-6LP sports an open-center design which makes it one of the best options in terms of convenience and work productivity. This lift can handle vehicles weighing up to 6,000 lbs. BendPak has crafted this lift for home garages, full-service shops, quick-lube pits, and rea
BendPak MDS-6LPF Car Lift
Forward Lift 6000MRL 6000 lbs Capacity Mid-Rise Lift
Tuxedo LR-10K-TLPAD 10,000 lbs Commercial Low Rise Pad Lift
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks. The LR-10K-TLPAD Pad Lift includes the latest in design & safety features including, twin hydraulic cylinders, three locking height positions with dual lat

Reviews
There are no reviews yet.