Ranger DST-2420 Wheel Balancer
$3,295.00
Ranger DST-2420 Wheel Balancer Extreme Accuracy, Speed & Reliability in a Wheel Balancer. The Ranger DST-2420 wheel balancer handles wheels up to a 30” diameter. It is a highly accurate and dependable no‐frills balancer that features our proprietary Digital Sensor Technology for critical reliability
Looking for a reliable wheel balancer? The Ranger DST-2420 delivers the durability, safety and ease of use that busy service bays demand. This page covers the Ranger DST-2420 features, specifications, installation planning and care so you can buy with confidence.
Ranger DST-2420 Features and Specifications
Ranger DST-2420 Wheel Balancer / 36 mm Shaft / 30″ Maximum Wheel Diameter Capacity – Yellow/Gray
Planning on balancing truck and SUV tires? We highly recommend purchasing the Truck Cone Kit (5150032)
The DST-2420 automatically calculates the exact weight needed to achieve an optimal balance for almost every tire and wheel configuration on the planet, as well as brightly displayed LEDs that mark the exact amount and location in just six seconds. A full menu of time-saving features, including Dynamic, Static, and Performance Alloy settings, allows you to balance OEM wheel configurations and performance wheels with minimal effort and speed.
Highly precise digital sensor technology
Our highly accurate Digital Sensor Technology features a 16-digit digital signal processor and single-chip technology that increases productivity and offers unprecedented speed and accuracy—especially when using sophisticated balance and weight placement techniques required for newer high-tech OEM and aftermarket wheels.
Single-chip circuit board architecture provides an inherent performance and reliability advantage compared to multi-chip implementations of the same functionality. In addition to overall latency reductions, the single-chip architecture significantly boosts device throughout. An extremely fast and dedicated hyper transport protocol allows data to communicate with the micro-processor at much faster speeds. This solution offers unmatched integration of features and functionality and results in both lower power consumption and dissipated heat.
Multi-directional quartz piezoelectric load sensors
Dual-component piezoelectric quartz load sensors and digital rotation encoder measure longitudinal, transversal and shear effects for multi-directional force unbalance detection. The piezoelectric force sensors are the most sensitive sensors we have ever made, offering superior stability and fatigue resistance for unlimited service life with your wheel balancer. The high-rigidity quartz crystal sensors offer high frequency detection in all three measured directions.
Quick and precise setup
Multi-size center cones and a full rubber perimeter no-mar “Quick-Nut” bell adapter makes mounting wheels fast and easy and minimizes the risk of costly wheel damage.
Mounting cone package
The DST-2420 tooling package not only includes our standard car and light truck cones, but a heavy-duty truck cone. This well-equipped package includes three automotive and light truck cones: 1.75” – 2.75”, 2.75” – 3.50” and 3.50” – 4.25”, as well as one truck cone 4.50” – 5.00”.
Tape weight feeder
Newly designed side shelf features an open-top design that accommodates Ranger Quick-Peel™ adhesive tape weight. These weights are sold separately in convenient bulk rolls.
Automatic weight optimization
The DST-2420 automatically calculates the minimum amount of weight needed to achieve an optimal balance for the tire and wheel configuration, so you use less weight. This adds up to real savings and increases your bottom line.
User-friendly operation
A touch-pad display panel features tire and wheel assembly graphics to help simplify speed entry of wheel data and guide technicians through balancing procedures. Operator function keys are labeled with simple, easy-to-read icons to help operators identify and command all balancing functions.
LED rolling wheel weight displays
Bright LED weight placement indicators show weight positions as the wheel is gently rolled to exact top-dead-center. Tiered weight placement indicators help identify out-of-sight weight placement such as split-weight or hidden “behind-the-spoke” techniques. Aids with clip-on and tape weight placement at precise locations for zero-on balancing every time.
Wheel weight starter kit
A free kit of wheel weights is included with DST2420 and DST64 wheel balancers. Each unit’s starter kit contains one bulk roll of 100 silver adhesive steel tape weights, one bulk roll of 100 black adhesive steel tape weights and one starter box of mixed clip-on steel weights. It’s our way of getting you off on the right foot. Additional Ranger wheel weights are available for purchase at any time.
Features & Specs
Dynamic, Static, and Performance Alloy settings
A multi-user save function holds presets to increase productivity
An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times
A simultaneous retrieval of static, dynamic and ALU1ALU2ALU3 data, identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button
Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors
Low RPM balancing speed and rapid six-second cycle time
Automatic braking
Gram/ounce selection and millimeter/inch selection
Automatic round-off with top-dead-center weight position indicator
Tiered weight placement indicators help identify out-of-sight position weight placement such as split-weight or hidden “behind-the-spoke” techniques
Manual or automatic start when hood is lowered
Self-calibration function
High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools
Newly designed side shelf features an open-top design that accommodates Ranger Quick-Peel™ adhesive tape weight convenient bulk rolls
Precision-machined, hardened-steel 36 mm shaft
Quick-release hub nut for dramatically reduced set-up times
Side-position brake hold wheels at precisely 12-o’clock for proper weight placement
Side cone storage pegs keeps accessories readily available
New “open-side” hood design allows for a broader coverage of tire shapes and sizes
Style
Style: Auto & Light Truck
Data Entry
Data Entry: Manual
Motor 1.5 HP, 110V / 220V, 50 / 60 Hz, 1Ph
Working Temperature -5°C / 27°F – 50°C / 82°F
Cycle Time 6 – 9 Seconds (avg.)
Balancing Modes Dynamic / Static / 3-Alloy
Drive System Belt Drive
Wheel Braking Automatic / Electronic
Cones Included 3 Standard / 1 Truck
Max. Tire Diameter 47” (1,194 mm)
Max. Tire Weight 145 lbs. (65 kg)
Wheel Diameter Capacity 10” – 30” (254 mm – 672 mm)
Wheel Width Capacity 2” – 18” (51 mm – 457 mm)
Balancing Increments 0.25 or 0.01 oz
Balancing Speed 180 RPM
Accuracy +/- 1 gram (.035 oz)
Resolution 0.01 ounce, 1.4°
Shipping Weight: 356 lbs. (161 kg)
Shipping Dimension: 38″ x 30″ x 46″ (965 mm x 762 mm x 1,168 mm)
Ranger DST-2420 Photos




Ranger DST-2420 at a Glance
- The Ranger DST-2420 is built for daily professional use.
- The Ranger DST-2420 is backed by manufacturer support and documentation.
- Our team can confirm shipping options for the Ranger DST-2420 to your location.
Key Highlights of the Ranger DST-2420
Here is a quick summary of what stands out on this wheel balancer:
- Planning on balancing truck and SUV tires? We highly recommend purchasing the Truck Cone Kit (5150032)
- Dynamic, Static, and Performance Alloy settings
- A multi-user save function holds presets to increase productivity
- Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors
- Low RPM balancing speed and rapid six-second cycle time
Why Shops Choose the Ranger DST-2420
c => `Wheel service is one of the most consistent revenue streams in any shop, and the ${c.kw} is built to handle it day after day. Thoughtful controls, solid construction and support for a wide range of wheel sizes make this ${c.noun} a strong fit for tire shops, general repair facilities and dealerships.`
Benefits of a Quality Wheel Balancer
The best wheel balancer is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.
Common Uses for the Ranger DST-2420
c => `The ${c.kw} is well suited for tire shops, general repair facilities, fleet garages and dealerships. It handles everyday passenger vehicles and, depending on the model, larger light-truck and performance wheels. Pairing it with matching wheel service equipment creates an efficient tire bay.`
Installation and Setup
c => `Place the ${c.kw} on a level, solid floor with enough room to load wheels and move around the machine. Confirm the electrical and air supply requirements before delivery. Many machines require calibration at setup, so follow the manufacturer’s instructions carefully or ask our team about installation options.`
Safety and Maintenance Tips for the Ranger DST-2420
c => `Keep the ${c.kw} clean and free of tire debris, and check moving parts, mounting heads and clamps for wear. Follow the calibration schedule recommended by the manufacturer to maintain accuracy. Always wear eye protection and follow safe tire inflation practices around wheel service equipment.`
Buy the Ranger DST-2420 from Ironside Garage
Ironside Garage carries a wide selection of professional equipment. Browse our full range of Wheel Balancers to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right wheel balancer for your shop.
For product manuals, technical documentation and manufacturer details, visit the official Ranger website.
Ranger DST-2420 FAQs
Will the Ranger DST-2420 work with larger wheels?
Wheel size range depends on the model. Check the specifications above or contact our team and we will confirm compatibility with the wheels you service.
Does the wheel balancer need calibration?
Most wheel service machines need calibration at setup and periodically afterward. Follow the manufacturer’s schedule to maintain accuracy.
How is the Ranger DST-2420 shipped?
Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.
Does the Ranger DST-2420 come with a warranty?
Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.
Related products
CEMB DWA1100CWAS Complete Wheel Alignment System
CEMB DWA1100CWAS Complete Wheel Alignment System A perfect package for portability or for shops starting out with low volume alignment service who wish to avoid the investment cost of an alignment rack. Portable wheel stands allow use on a two-post lift in virtually any work bay. Optimal for small r
CEMB EZ10 Space Saving 3D Data Entry Wheel Balancer
Hofmann Geoliner 609 Imaging Wheel Aligner with AC200 Clamps
Hofmann Geoliner 609 Imaging Wheel Aligner with AC200 Clamps If you want to start offering wheel alignment services but don’t have much shop space available, the geoliner® 609 tablet-controlled wheel aligner provides technicians with the freedom to work from anywhere in the shop. Our innovative imag

Reviews
There are no reviews yet.