Mahle CFC-16 Commercial Filter Crusher

$3,467.00

Mahle CFC-16 Commercial Filter Crusher

SKU: IRG0507 Categories: ,
Description

The Mahle CFC-16 commercial filter crusher is a 100% air-operated machine that crushes oil filters up to 16 inches in size. Its tall chamber handles long commercial truck and equipment filters, and it also accommodates up to four automotive spin-on filters at the same time. A door interlock keeps the chamber closed until the ram is fully retracted, and the removable catch basin makes cleaning easy. The CFC-16 comes with a mounting stand and needs no complicated setup.

This guide covers the CFC-16 specifications, how it works, air supply and setup, maintenance, and common questions. If you are adding shop equipment to cut waste and recover used oil from both cars and commercial vehicles, the Mahle CFC-16 is a versatile choice.

Mahle CFC-16 Commercial Filter Crusher

FEATURES

Crushes oil filters up to 16 inches in size

Accommodates up to 4 automotive spin-on oil filters simultaneously

Interlocking feature prevents door from opening until the ram is fully retracted

Removable catch basin allows crusher to be cleaned periodically

100% air operated

Mounting stand included and no complicated set-up or installation required

Product Specifications

Dimensions (H x W x D) 85.5 in x 20.5 in x 16.8 in (217 cm x 52 cm x 43 cm)

Shipping Weight 282 lb (128 kg)

Crushing Chamber Dimensions (H x W x D) 16.3 in x 10 in x 8 in (41 cm x 25 cm x 20 cm)

Air Inlet 1/4 female npt

Air Pressure 100 to 200 psi (6.9 to 13.8 bar)

Catch Basin Connection 3/4 female npt

Stand Dimensions (H x W x D) 61 in x 29 in x 27 in (155 cm x 74 cm x 69 cm)

Mahle CFC-16 Specifications

  • Filter size: crushes oil filters up to 16 inches
  • Capacity: up to 4 automotive spin-on oil filters at once
  • Operation: 100% air operated
  • Overall dimensions (H x W x D): 85.5″ x 20.5″ x 16.8″ (217 cm x 52 cm x 43 cm)
  • Crushing chamber (H x W x D): 16.3″ x 10″ x 8″ (41 cm x 25 cm x 20 cm)
  • Air inlet: 1/4″ female NPT
  • Air pressure: 100 to 200 psi (6.9 to 13.8 bar)
  • Catch basin connection: 3/4″ female NPT
  • Stand dimensions (H x W x D): 61″ x 29″ x 27″ (155 cm x 74 cm x 69 cm)
  • Shipping weight: 282 lbs. (128 kg)
  • Included: mounting stand and removable catch basin

Key Features of the CFC-16

Handles Filters Up to 16 Inches

The CFC-16 is built for commercial work. It crushes oil filters up to 16 inches in size, so long filters from heavy trucks, buses, and equipment fit in the tall 16.3-inch chamber. One machine can handle both commercial filters and everyday automotive filters.

Crushes Up to Four Filters at Once

Most filter crushers handle one filter per cycle. The CFC-16 accepts up to four automotive spin-on oil filters at the same time. In a shop that changes oil all day, that can cut the time spent crushing filters by a large amount. Technicians can collect filters during a few oil changes and crush them together in one cycle.

Door Interlock for Safety

The CFC-16 has an interlocking feature that prevents the door from opening until the ram is fully retracted. That means an operator cannot open the chamber while the ram is still down or moving. It is a simple, effective way to keep hands away from the crushing area during operation.

Removable Catch Basin

Oil squeezed from the filters drains into a catch basin. The basin is removable, so the crusher can be cleaned periodically. Keeping the basin clean helps oil drain freely and keeps sludge from building up. The basin has a 3/4-inch female NPT connection, so you can run a drain line to a storage container.

100% Air Operated

The CFC-16 runs entirely on compressed air between 100 and 160 psi. It needs no electrical connection, which makes it easy to place anywhere you have an air line. Air-operated crushers have fewer parts that need service compared to electric-hydraulic units.

Mounting Stand Included

The CFC-16 comes with a mounting stand. The stand measures 61 inches high, 29 inches wide, and 27 inches deep, and it raises the crusher to a comfortable working height. There is no complicated setup or installation required.

Why Crush Used Oil Filters?

Every oil change leaves behind a used filter full of oil and sludge. A typical shop can go through hundreds or thousands of filters a year. Storing whole, oily filters takes up a lot of space, creates drips and spill hazards, and costs money when they are hauled away.

Crushing filters with the CFC-16 offers several benefits:

  • Less storage space. Crushed filters take far less room than whole filters, so containers fill more slowly.
  • Fewer pickups. Less volume means fewer hauls and lower costs.
  • More recovered oil. Oil squeezed from the filters drains to the catch basin and can be sent for recycling.
  • Recyclable metal. Drained, crushed filters can often go to scrap metal recyclers.
  • Cleaner shop. Crushed filters drip less than whole ones.

Used oil and oil filters must be handled according to federal, state, and local rules. The EPA guidance on used oil is a good place to start, and your state environmental agency can tell you about any added requirements.

How the CFC-16 Works

Compressed air from your shop system enters the CFC-16 through the 1/4-inch female NPT inlet. The air drives a cylinder that pushes the ram down into the crushing chamber. Filters placed in the 16.3-inch by 10-inch by 8-inch chamber are flattened, and the oil inside is pressed out.

The oil drains down into the removable catch basin. From there, it can flow through the 3/4-inch NPT connection into a storage container for recycling. When the cycle is done, the ram retracts. Only after the ram is fully retracted does the interlock allow the door to open, so the operator can remove the crushed filters safely.

CFC-16 key specifications

Setting Up the CFC-16

Setup is simple. Place the included stand on a level floor near the area where oil changes happen. Mount the CFC-16 on the stand according to Mahle’s instructions. Connect an air line to the 1/4-inch female NPT inlet and make sure your shop air supplies 100 to 200 psi.

Connect a drain line from the 3/4-inch catch basin connection to a used oil container if you want the oil to drain directly into storage. Keep the container close and easy to swap out when it gets full.

The CFC-16 is 85.5 inches tall, 20.5 inches wide, and 16.8 inches deep. Its narrow footprint fits into tight spaces in lube bays and service areas. Leave room in front so the operator can open the door and load filters comfortably.

Air Supply Tips for the CFC-16

Because the CFC-16 is 100% air operated, a good air supply is key to steady performance. The crusher needs 100 to 200 psi at the inlet. Here are some tips to keep air delivery reliable:

  • Use an air line and fittings sized to deliver full pressure to the crusher.
  • Install a filter and water separator in the line to keep moisture and debris out of the cylinder.
  • Drain your compressor tank and line traps regularly so water does not reach the crusher.
  • Check for air leaks at fittings and hoses, since leaks lower pressure and waste energy.
  • Make sure your compressor can keep up with the crusher and the other air tools in the shop.

Low air pressure can lead to weaker crushing and more oil left in the filters. If filters are not crushing as flat as they should, check the pressure at the inlet first.

Step-by-Step: Crushing Filters With the CFC-16

  1. Make sure the catch basin is in place and the drain line or container has room for more oil.
  2. Open the door and place up to four automotive spin-on filters in the chamber.
  3. Close the door.
  4. Start the crush cycle using the CFC-16 controls.
  5. Let the ram press the filters and allow the oil to drain.
  6. Wait until the ram is fully retracted. The interlock will then allow the door to open.
  7. Open the door and remove the crushed filters.
  8. Put the crushed filters in a labeled container for scrap metal recycling.

Always follow the instructions in the Mahle owner’s manual for your specific unit.

What Filters Fit in the CFC-16?

The CFC-16 is a commercial filter crusher. It crushes oil filters up to 16 inches in size, and its chamber measures 16.3 inches high, 10 inches wide, and 8 inches deep. That tall chamber handles long commercial filters from trucks, buses, and equipment, along with standard automotive filters.

For automotive work, the CFC-16 accommodates up to four spin-on oil filters at the same time. Shops that service both cars and commercial vehicles can use one crusher for nearly every filter that comes through the door. Before you buy, compare your largest filters with the 16-inch rating and the chamber dimensions.

CFC-16 Maintenance Checklist

  • Clean the catch basin. Remove the basin periodically and clean out sludge and debris.
  • Check the drain line. Make sure oil flows freely from the 3/4-inch connection to your storage container.
  • Inspect the chamber. Wipe out oil and debris so filters sit evenly.
  • Test the interlock. Confirm the door will not open until the ram is fully retracted.
  • Check air fittings. Look for leaks at the 1/4-inch inlet and along the air line.
  • Drain moisture. Keep water out of the air supply to protect the cylinder.
  • Check the stand. Make sure bolts are tight and the crusher sits steady.

A quick weekly check keeps the CFC-16 working well and helps you catch small issues before they become problems.

CFC-16

CFC-16 key features

Who Should Buy the Mahle CFC-16?

  • General automotive repair shops
  • Quick-lube and oil change centers
  • Dealership service departments
  • Fleet garages servicing cars and light trucks
  • Tire and service centers that offer oil changes
  • Shops that want an air-powered crusher with no electrical work

If your shop does many oil changes each day, crushing four filters per cycle with the CFC-16 can save real time compared to single-filter machines.

CFC-16 vs. Draining Filters by Gravity

Some shops drain filters by setting them upside down over a pan and letting them drip for hours. That method takes a lot of time and space, and filters still hold oil in their media afterward. The CFC-16 presses the oil out and flattens the filters, so you get more oil for recycling, less waste volume, and a cleaner work area.

Safety Tips for Using the CFC-16

  • Wear gloves and safety glasses when handling used filters and oil.
  • Never try to defeat the door interlock.
  • Keep hands out of the chamber while the ram is moving.
  • Keep the floor around the crusher clean and dry.
  • Train every employee who uses the CFC-16.
  • Store used oil in labeled, closed containers.

General workplace machine safety guidance is available from OSHA’s machine guarding resources.

Building a Filter Recycling Routine

The CFC-16 works best as part of a simple daily routine. Collect used filters in a small drip tray as oil changes finish. When you have up to four filters, load them into the CFC-16 and crush them together. Move the crushed filters to a labeled scrap container right away.

Run the catch basin drain to a labeled used oil container, and keep that container closed when not in use. Store containers away from floor drains, heat sources, and traffic areas.

Ask your used oil hauler how often they pick up and whether they accept crushed filters. Contact local scrap metal recyclers to see which ones take drained filters. Keep simple records of pickups and amounts. Records help show that waste is handled correctly and make it easy to see how much money the CFC-16 saves your shop.

CFC-16 best uses

How the CFC-16 Helps Your Bottom Line

The savings from the CFC-16 add up from several small sources. Crushed filters take less space, so you need fewer containers and fewer pickups. Oil pressed out of the filters adds to the volume your used oil collector takes away. Drained steel can often be recycled as scrap instead of being handled as oily waste. And because the CFC-16 crushes up to four filters at once, technicians spend less time at the crusher and more time on billable work.

Since it runs on shop air and has a simple design, the CFC-16 also keeps operating costs low. There is no electric motor or hydraulic pump to maintain.

Placing the CFC-16 in Your Shop

Put the CFC-16 close to your oil change bays so used filters travel only a short distance. Make sure an air drop is nearby to connect the 1/4-inch inlet. Keep the area around the stand clear so you can reach the catch basin and swap oil containers easily. Good lighting helps operators load filters and check the chamber.

If you are planning a new service area, think about lifts, drains, and fluid equipment together. Our car lifts section can help you plan your bays.

Air-Operated vs. Electric-Hydraulic Crushers

Filter crushers come in two main types. Electric-hydraulic models use an electric motor and a hydraulic pump to drive the ram. Air-operated models, like the CFC-16, use compressed shop air. Each has its strengths.

An air-operated crusher needs no electrical circuit, so installation is easier and the machine can go anywhere an air drop is available. It also has fewer parts to wear out, with no motor or hydraulic fluid to service. The trade-off is that it depends on your compressor, so your air system must deliver 100 to 200 psi when the crusher runs. For truck, fleet, and automotive shops that already rely on shop air every day, the CFC-16 is a simple fit that keeps filter crushing quick and low maintenance.

Frequently Asked Questions About the CFC-16

How many filters can the CFC-16 crush at once?

The CFC-16 accommodates up to four automotive spin-on oil filters at the same time.

Does the CFC-16 need electricity?

No. It is 100% air operated.

What air pressure does it need?

It needs 100 to 200 psi (6.9 to 13.8 bar) at the inlet.

What size is the air inlet?

The air inlet is a 1/4-inch female NPT connection.

What size is the crushing chamber?

The chamber measures 16.3 inches high, 10 inches wide, and 8 inches deep.

Is a stand included?

Yes. A mounting stand is included, and no complicated setup is required.

How does the door interlock work?

The interlock prevents the door from opening until the ram is fully retracted.

Can the catch basin be removed?

Yes. The catch basin is removable so the crusher can be cleaned periodically. It has a 3/4-inch female NPT connection.

How much does the CFC-16 weigh?

The shipping weight is 282 lbs. (128 kg).

How tall is the CFC-16?

The overall height is 85.5 inches, with a width of 20.5 inches and a depth of 16.8 inches.

Order the Mahle CFC-16 Today

The Mahle CFC-16 commercial filter crusher gives your shop a simple, air-powered way to crush up to four spin-on filters at once. With a door interlock, a removable catch basin, and an included mounting stand, the CFC-16 is easy to set up and easy to use. It saves storage space, helps recover used oil, and turns old filters into recyclable metal. Contact Ironside Garage with questions about air supply or delivery, and browse our full line of shop equipment.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Mahle CFC-16 Commercial Filter Crusher”

Your email address will not be published. Required fields are marked *

Shipping & Delivery