Ranger RP-30FCH oil filter crusher
$2,995.00
Ranger RP-30FCH oil filter crusher can apply 30,000 lbs. of crushing force against used oil filters that need to be completely drained of residual oil. It features a manual stainless-steel handle which is ergonomically placed on the side of the crusher to safely manage its two-way stop-and-start ope
The Ranger RP-30FCH oil filter crusher turns used oil filters into compact, recyclable metal pucks while draining out the oil trapped inside. With 15 tons (30,000 lbs.) of crushing force, the RP-30FCH squeezes most filters to 20% of their original size and removes up to 95% of the remaining oil in about 8 to 15 seconds. A rugged floor stand holds drums up to 55 gallons, so the recovered oil goes straight into storage for recycling.
This guide covers the full RP-30FCH specifications, how the crusher works, its safety features, installation needs, maintenance, and answers to common questions. If you run a quick-lube or full-service shop and are shopping for shop equipment that pays for itself, the Ranger RP-30FCH is worth a close look.
Ranger RP-30FCH oil filter crusher
Crush Your Filters and Save Thousands
By having a top-notch oil crusher you’ll be able to reduce shop costs while you earn a profit. To maximize its money-making potential, Ranger has kept the RP-30FCH simple to use, and extremely powerful. Anyone who runs a quick-lube or full-service auto shop knows that the residual oil that gets stuck in oil filters is like liquid gold. Any successful shop wouldn’t want to let this stuff go, and they have a plan to use it wisely for a profit.
Used oil can be repurposed, recycled, or refined. This eliminates disposal fees while increasing your bottom line. The oil filter casings can be recycled as scrap metal. It’s also worth noting that it’s illegal to dispose of oily, uncrushed filters without incurring heavy fines from both state and federal governments.
The RP-30FCH is capable of delivering 15 tons of crushing power. Most oil filters can be easily smashed down to hockey pucks in a matter of seconds. As long as the uncrushed filter fits in the crushing chamber, there’s an extremely high likelihood that the RP-30FCH will be draining out that oil in no time at all, converting your hazardous-waste oil filters into legally recyclable metal. This crusher can crush oil filters down to 20% of their original size while removing up to 95% of any remaining oil from the filter. A large, rugged stand permits the use of oil storage drums up to 55 gallons.
With the RP-30FCH delivers the essentials. Manually operated machinery is often preferred due to its simplicity and overall dependability. Its two-way handle permits lowering and raising of the crushing block; and releasing the handle immediately stops all operations. To further ensure user safety, a built in, spring-loaded shutoff switch is depressed when the chamber door is closed. If, by chance, the door opens, the switch will cut electrical connectivity to the crusher and operations will cease immediately. Plus, the RP-30FCH oil filter crusher sports a see-through fiberglass window, giving operators a chance to safely watch all crushing operations in real-time.
Features
Maximum crushing pressure of 30,000 pounds
Filters are reduced to 20% of their original size with 95% of residual oil removed
Fulfills EPA and other mandated environmental standards
Save on waste disposal costs and storage space
Cycle time approximately 8 to 15 seconds depending on filter size
No-mess design operates clean and efficiently to lessen spill hazards
Ergonomic controls feature manual cycles
Welded steel plate construction
Electric-hydraulic power unit features 2-HP motor
Spring-loaded shutoff switch stops operation when door is opened
Transparent door for a convenient view of the crushing process
Powered by a 2-HP electric-hydraulic pump with 2-gallon reservoir
Rugged floor stand is designed to accommodate up to 55-gallon drums for efficient fluid handling
Overall Height: 75” (1,905 mm)
Overall Width: 42.5” (1,080 mm)
Overall Depth: 17″ (432 mm)
Chamber Opening Height: 10.75” (273 mm)
Chamber Opening Width: 8.5” (216 mm)
Chamber Opening Depth: 10.5” (267 mm)
Average Cycle Time: 8 – 15 sec
Power Supply: 208-240V / 50/60 Hz / 1 Ph
Shipping Weight: 296 lbs. (134 kgs.)
Shipping Dimensions: 33″ x 38″ x 21″ (838 mm x 965 mm x 533 mm)
Ranger RP-30FCH Specifications
Here are the published specifications for the Ranger RP-30FCH oil filter crusher:
- Maximum crushing pressure: 30,000 lbs. (15 tons)
- Filter reduction: to 20% of original size
- Oil removal: up to 95% of residual oil
- Average cycle time: 8-15 seconds, depending on filter size
- Power unit: 2-HP electric-hydraulic pump with 2-gallon reservoir
- Power supply: 208-240V / 50/60 Hz / 1 phase
- Overall height: 75″ (1,905 mm)
- Overall width: 42.5″ (1,080 mm)
- Overall depth: 17″ (432 mm)
- Chamber opening height: 10.75″ (273 mm)
- Chamber opening width: 8.5″ (216 mm)
- Chamber opening depth: 10.5″ (267 mm)
- Drum stand: accommodates up to 55-gallon drums
- Construction: welded steel plate
- Shipping weight: 296 lbs. (134 kg)
- Shipping dimensions: 33″ x 38″ x 21″ (838 mm x 965 mm x 533 mm)
Why Crush Oil Filters?
Anyone who runs a quick-lube or full-service shop knows that used oil filters are full of leftover oil. That residual oil has value. Used oil can be collected and sent for recycling or re-refining instead of being thrown away. Once the oil is drained, the steel filter casing can be recycled as scrap metal.
Crushing filters gives your shop several advantages:
- Lower disposal costs. Crushed filters take up far less space, so you need fewer pickups and less storage.
- More recovered oil. Removing up to 95% of the oil from each filter adds to the volume you can send for recycling.
- Recyclable metal. Drained, crushed filters can often go to a scrap metal recycler.
- Cleaner storage. Compact pucks drip less and are easier to store than whole, oily filters.
- Help with compliance. Ranger states the RP-30FCH fulfills EPA and other mandated environmental standards for filter handling.
Disposing of oily, uncrushed filters the wrong way can lead to fines. The EPA guidance on managing used oil explains how used oil and oil filters should be handled. Check your state rules, too, since some states have stricter requirements.
How the RP-30FCH Oil Filter Crusher Works
The RP-30FCH uses an electric-hydraulic power unit with a 2-HP motor and a 2-gallon hydraulic reservoir. When you run a cycle, the hydraulic pump drives a crushing block down into the chamber with up to 30,000 lbs. of force. The filter is flattened against the bottom of the chamber, and the oil trapped in the media and canister is forced out.
The squeezed-out oil drains down through the crusher into a drum on the floor stand below. The stand fits drums up to 55 gallons, so you can collect a large amount of oil before the drum needs to be swapped. Most filters end up as flat pucks about one-fifth of their original size.
A full cycle takes about 8 to 15 seconds, depending on the size of the filter. That speed lets a busy lube bay crush filters as they come off vehicles instead of letting them pile up.
Simple Manual Controls
Ranger kept the RP-30FCH simple to use. Many shops prefer manually operated controls because they are easy to learn and dependable. The two-way handle raises and lowers the crushing block. Push the handle one way to crush, and the other way to raise the block. Release the handle and all motion stops right away.
Because operation stops as soon as the handle is released, the operator stays in control of every cycle. There are no complicated programs to set and fewer electronic parts to fail.

RP-30FCH Safety Features
The RP-30FCH includes several features that help protect the operator:
- Spring-loaded door shutoff switch. The switch is pressed when the chamber door is closed. If the door opens, the switch cuts power to the crusher and operation stops immediately.
- Transparent door. A see-through fiberglass window lets the operator watch the crushing process in real time without opening the door.
- Release-to-stop handle. Letting go of the two-way handle stops the crushing block at once.
- No-mess design. The crusher is designed to operate cleanly and reduce spill hazards around the work area.
- Welded steel plate construction. Heavy steel plate stands up to repeated 15-ton cycles.
Train every employee who uses the RP-30FCH on these features. Workplace machine safety guidance is available from OSHA’s machine guarding resources.
What Filters Fit in the RP-30FCH?
The crushing chamber opening of the RP-30FCH measures 10.75 inches high, 8.5 inches wide, and 10.5 inches deep. As long as an uncrushed filter fits in the chamber, the RP-30FCH can most likely crush it and drain out the oil. That covers the oil filters used on most passenger cars, light trucks, and SUVs, along with many larger filters from vans, light commercial vehicles, and some equipment.
Measure the largest filters your shop handles before you buy. If you service heavy-duty trucks with very tall filters, compare their height and diameter with the 10.75-inch by 8.5-inch opening. For the average lube shop, the chamber handles the filters that come off vehicles every day.
Step-by-Step: Crushing a Filter
- Make sure a drum is in place on the floor stand and has room for more oil.
- Let the used filter drain for a short time after removal, if your process allows it.
- Open the chamber door and place the filter in the center of the chamber.
- Close the door fully so the spring-loaded shutoff switch is pressed.
- Move the two-way handle to lower the crushing block.
- Watch through the transparent door as the filter is crushed.
- After the filter is flattened, move the handle to raise the block.
- Open the door and remove the crushed puck.
- Place the puck in your scrap metal or filter recycling container.
Each cycle takes about 8 to 15 seconds. With a little practice, an operator can crush a full day of filters in a few minutes.
Installation and Power Requirements
The RP-30FCH runs on 208-240V, 50/60 Hz, single phase power. Have a licensed electrician install a properly sized circuit and make the connection according to local codes.
The crusher stands 75 inches tall, 42.5 inches wide, and 17 inches deep. Place it on a level concrete floor close to where filters come off vehicles, such as the lube pit or service bays. Leave space in front for the operator, room to swap the drum under the stand, and space around the unit for service.
Because the floor stand holds drums up to 55 gallons, plan for how you will move full drums. A drum dolly or drum truck makes swapping a full drum safer. Keep spill absorbent nearby in case of drips during drum changes.


RP-30FCH Maintenance Tips
- Check the hydraulic fluid. Keep the 2-gallon reservoir at the correct level and look for leaks around fittings and hoses.
- Clean the chamber. Wipe out debris and oil buildup so filters sit flat and the door closes fully.
- Test the door switch. Make sure the crusher will not run when the door is open.
- Inspect the window. Keep the transparent door clean so the operator can see the process.
- Watch the drum level. Swap the drum before it gets too full.
- Check fasteners. Tighten bolts on the stand and frame as needed.
A simple weekly check keeps the RP-30FCH ready to work and helps you catch small problems early.
Who Should Buy the Ranger RP-30FCH?
The RP-30FCH is a good fit for:
- Quick-lube and oil change shops
- Full-service auto repair shops
- New and used car dealership service departments
- Fleet maintenance garages
- Tire and service centers that offer oil changes
- Municipal and government vehicle shops
If your shop changes oil every day, filters pile up fast. The RP-30FCH helps you turn that waste stream into recovered oil and recyclable metal while saving storage space and disposal costs.
RP-30FCH vs. Draining Filters by Gravity
Some shops simply set filters upside down over a drain pan and let them drip. Gravity draining takes hours and still leaves a lot of oil in the filter media. The filters also take up a lot of space. The RP-30FCH removes up to 95% of the residual oil in seconds and reduces each filter to 20% of its original size. That means less mess, less space, and more oil collected for recycling.
Safety Tips for Using a Filter Crusher
- Wear gloves and safety glasses when handling used filters and oil.
- Keep hands out of the chamber while the crushing block is moving.
- Never bypass or disable the door shutoff switch.
- Keep the area around the crusher clean and dry to prevent slips.
- Only trained employees should operate the RP-30FCH.
- Store used oil in approved containers and label them correctly.

Handling Recovered Oil and Crushed Filters
Crushing is only part of a good filter recycling program. Once the RP-30FCH drains the oil into a drum, store that drum in a safe place, keep it closed when not in use, and label it as used oil. Many used oil collectors will pick up full drums from your shop. Some will also pay for or accept the oil at low cost, depending on your area.
Crushed filter pucks should go into a separate, labeled container. Ask your local scrap metal recycler or used oil hauler whether they accept drained filters. Keeping oil and metal separated makes recycling easier and helps you meet local rules. The EPA used oil management page is a useful starting point for building your program.
How the RP-30FCH Pays for Itself
The value of an oil filter crusher comes from several small savings that add up every day. Each crushed filter takes up about one-fifth of the space of a whole filter, so storage containers fill more slowly and pickups happen less often. The oil drained into the drum adds to the volume your used oil collector takes away.
Drained steel casings can often go to scrap recycling instead of paid disposal. For a busy quick-lube shop that changes dozens of filters a day, these savings can be significant over a year. Talk with your local used oil hauler and scrap recycler to see what they offer in your area, and track your costs before and after adding the RP-30FCH.
Frequently Asked Questions About the RP-30FCH
How much force does the RP-30FCH produce?
It delivers a maximum crushing pressure of 30,000 lbs., or 15 tons.
How much oil does it remove from a filter?
The RP-30FCH removes up to 95% of the residual oil from a filter.
How small does it crush filters?
Filters are reduced to about 20% of their original size.
How long is a cycle?
An average cycle takes 8 to 15 seconds, depending on filter size.
What size is the crushing chamber?
The chamber opening is 10.75 inches high, 8.5 inches wide, and 10.5 inches deep.
What power does it need?
It runs on 208-240V, 50/60 Hz, single phase power and uses a 2-HP electric-hydraulic pump.
What size drum fits under the crusher?
The floor stand accommodates drums up to 55 gallons.
Does the RP-30FCH have a door safety switch?
Yes. A spring-loaded shutoff switch stops operation if the door is opened.
How much does it weigh?
The shipping weight is 296 lbs. (134 kg).
Order the Ranger RP-30FCH Oil Filter Crusher
The Ranger RP-30FCH oil filter crusher gives your shop 15 tons of crushing force, fast 8-15 second cycles, and up to 95% oil removal in a simple, manually controlled machine. It saves storage space, cuts disposal costs, and turns used filters into recyclable metal. Contact Ironside Garage with questions about power, sizing, or delivery, and browse our full line of shop equipment for your service bays.
Related products
Atlas Automotive Equipment Spray Wash Cabinet
Atlas Automotive Equipment Spray Wash Cabinet The Atlas 500 Spray Wash Cabinet is the ideal parts washer for any automotive repair shop. The 1,000 lb. capacity turntable is strong enough for any size auto or light truck engine. The cut-away sides under the door allow you to wheel your engine crane r
Atlas SBC420 Standard Sandblast Cabinet with Vacuum
Atlas SBC420 Standard Sandblast Cabinet with Vacuum The Atlas® SBC420 sandblast cabinet features dual side doors and a large front door for easy loading and unloading. The lower hopper stores the abrasive material for reuse or easy removal. The SBC420 cabinet is always ready when you are. The cabine
Cool Boss CB-28L Portable Evaporative Air Cooler
Cool Boss CB-28L Portable Evaporative Air Cooler The CB-28 is a medium-duty commercial-grade cooler that is well-suited for large industrial space cooling. When temperatures rise and you’re looking for a cost-effective cooling solution, look no further than Cool Boss. The CB-28 evaporative cooler pu
Flo Dynamics TSD650LCD ATF Inline and Dipstick Exchanger
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft
Portacool Apex 1200 Wi-Fi Enabled High Velocity Portable Evaporative Cooler for 1200 sq ft Meet the Portacool APEX™ 1200—a game-changer for mid-sized spaces demanding serious cooling. Delivering a powerful 4,000 CFMs of airflow that spans up to 40 ft., this unit ensures consistent comfort across 1,2

Reviews
There are no reviews yet.