Mahle FluidPRO MCX-2HD Multi-Coolant Exchanger

$3,250.00

Mahle FluidPRO MCX-2HD Multi-Coolant Exchanger with HD Truck Adapter Set FluidPRO equipment from MAHLE Service Solutions offers a range of choices in fluid exchange equipment. With the added features for OEMgrade services, the FluidPRO® MCX-2HD adds larger capacity fill tanks and larger step adapter

SKU: IRG0492 Categories: ,
Description

The Mahle FluidPRO MCX-2HD is a multi-coolant exchanger that completes an average full coolant exchange in less than 3 minutes. It works with all coolant types, carries two 15-gallon new coolant tanks and one 15-gallon waste tank, and replaces 92 to 98% of the old coolant in a single pass on most vehicles. The MCX-2HD runs from a 12V power source using battery clips and includes an HD truck adapter set, so it is ready for cars, light trucks, and heavy-duty trucks.

This guide covers the MCX-2HD specifications, how it works, setup, maintenance, and common questions. If you want shop equipment that makes coolant service fast, clean, and profitable, the MCX-2HD is a strong choice.

Mahle FluidPRO MCX-2HD Multi-Coolant Exchanger with HD Truck Adapter Set

Features of the MCX-2HD:

Compatible with all coolant types

Contains two 15 gallon new coolant tanks and one 15 gallon waste tank

Automatic pump shut-off

Easy disconnect drip-proof tank connectors

Fast service times of 3 minutes

Visible fluid level indicators

Easy-to-read gauges

12V power supply clips

Product Specifications

Adapters Step Adapters Universal; 2 sets; 1-1/4 in to 1-3/4 in range (3.2 cm to 4.4 cm) diameter (MCX-2HD contains additional step adapters) / Hose Adapters: Universal; 2 hoses, 1-1/4 in to 1-3/8 in (3.2 cm to 3.5 cm) and 1-1/2 in to 1-3/4 in. (3.8 cm to 4.4 cm) diameter (MCX-2HD contains additional adapter hoses)

Coolant Exchange 92 to 98% single pass, average exchange for most vehicles

Dimensions (H x W x D) 45 in x 38 in x 22.5 in (114 cm x 97 cm x 57 cm)

Fluid Tanks / Types Contains two 15 gal (57 liter) new coolant tanks and one 15 gal waste coolant tank; integrated input/output tube; w/ automatic empty fluid level sensor

Hoses 3/8 in (9.5 mm); quick connect/disconnect (brass; chrome sleeve; silicone sealed) Operating Range 32° to 122°F (0° to 50°C)

Power Source 12 VDC – 15 Amp

Pressure Switch 6 to 12 psi (0.4 to 0.8 bar); protects vehicle cooling systems from high pressure

Process Time Less than 3 minutes average full exchange

Pumps 2 gal. (7.9 liter) per minute Fill: Diaphragm Type / Drain: Impeller Type

Warranty 1 Year–parts & labor

Weight 170 lb. (77 kg)

 

Mahle MCX-2HD Specifications

  • Coolant exchange: 92 to 98% single pass, average for most vehicles
  • Process time: less than 3 minutes average full exchange
  • Fluid tanks: two 15-gallon (57 L) new coolant tanks and one 15-gallon waste tank
  • Tank features: integrated input/output tube with automatic empty fluid level sensor
  • Pumps: 2 gallons (7.9 L) per minute; diaphragm-type fill, impeller-type drain
  • Pressure switch: 6 to 12 psi (0.4 to 0.8 bar), protects vehicle cooling systems from high pressure
  • Hoses: 3/8 in. (9.5 mm), brass quick connect/disconnect with chrome sleeve, silicone sealed
  • Step adapters: universal, 2 sets, 1-1/4 in. to 1-3/4 in. range, plus additional HD step adapters
  • Hose adapters: universal, 2 hoses (1-1/4 in. to 1-3/8 in. and 1-1/2 in. to 1-3/4 in.), plus additional HD adapter hoses
  • Power source: 12 VDC, 15 amp
  • Operating range: 32°F to 122°F (0°C to 50°C)
  • Dimensions (H x W x D): 45 in. x 38 in. x 22.5 in. (114 cm x 97 cm x 57 cm)
  • Weight: 170 lbs. (77 kg)
  • Warranty: 1 year, parts and labor

Key Features of the MCX-2HD

Compatible With All Coolant Types

The MCX-2HD works with all coolant types. Two separate 15-gallon new coolant tanks let you keep two different formulas on board at the same time, so technicians can match the right coolant to each vehicle.

Fast 3-Minute Service

An average full exchange takes less than 3 minutes. Short service times help keep bays moving and make it easy to add coolant service during other maintenance visits.

92 to 98% Single-Pass Exchange

For most vehicles, the MCX-2HD replaces 92 to 98% of the old coolant in a single pass. That is a far more complete service than a basic drain and fill.

Automatic Pump Shut-Off

An automatic empty fluid level sensor and automatic pump shut-off help prevent the pumps from running dry and help avoid sending air into the cooling system.

Pressure Protection

A pressure switch set at 6 to 12 psi protects vehicle cooling systems from high pressure during the exchange.

Drip-Proof Tank Connectors

Easy-disconnect, drip-proof tank connectors make it simple to remove and fill tanks without spills.

Visible Levels and Easy Gauges

Visible fluid level indicators show how much new and used coolant is in each tank, and easy-to-read gauges help technicians monitor the process.

12V Power Supply Clips

The MCX-2HD runs on 12 VDC at 15 amps using power supply clips. It does not need a wall outlet or shop air, so it can be used in any bay.

HD Truck Adapter Set

Along with two sets of universal step adapters and two universal hose adapters, the MCX-2HD includes additional step adapters and adapter hoses for heavy-duty trucks.

Why Coolant Service Matters

Engine coolant does more than keep an engine from overheating. It also protects against freezing and helps prevent corrosion inside the radiator, water pump, heater core, and engine passages. Over time, coolant breaks down and loses its protective additives. Old coolant can lead to corrosion, scale, and overheating.

Vehicle makers recommend replacing coolant at set intervals. A coolant exchanger like the MCX-2HD replaces old coolant more completely than a simple drain and fill, because it moves fluid through the whole system rather than only draining what is in the radiator.

How the MCX-2HD Works

The technician connects the MCX-2HD into the vehicle’s cooling system using the universal step adapters and hose adapters, or the HD adapters for larger trucks. Power comes from the 12V supply clips. During the exchange, an impeller-type drain pump removes old coolant into the 15-gallon waste tank while a diaphragm-type fill pump delivers new coolant from the selected 15-gallon tank. Each pump is rated at 2 gallons per minute.

The pressure switch, set at 6 to 12 psi, protects the cooling system from excess pressure. The automatic empty fluid level sensor shuts the pump off when a tank runs empty. The brass quick-connect hoses with chrome sleeves and silicone seals connect and disconnect cleanly.

Always follow the Mahle operating manual and the vehicle maker’s procedures for coolant type, bleeding, and final fill level.

Coolant Exchange vs. Drain and Fill

A basic drain and fill only removes the coolant that drains out of the radiator. A large share of the old coolant stays in the engine block, heater core, and hoses, where it mixes with the new fluid. The result is diluted coolant that may not give full protection.

An exchange machine like the MCX-2HD moves fluid through the whole cooling system. Old coolant is pulled out while new coolant goes in, so more of the old fluid is replaced. Customers get better protection, and the shop gets a faster, cleaner process with less mess on the floor.

MCX-2HD key specifications

Setting Up the MCX-2HD

The MCX-2HD measures 45 inches high, 38 inches wide, and 22.5 inches deep and weighs 170 lbs. Place it near your service bays where it can be rolled close to the vehicle. Fill the two 15-gallon new coolant tanks with the coolant types you use most, and label each tank clearly. Keep the adapter sets stored with the machine so technicians can find the right size quickly.

The machine runs on 12 VDC at 15 amps through its power supply clips. Use it within the operating range of 32°F to 122°F (0°C to 50°C).

Step-by-Step: A Typical Exchange

  1. Confirm the correct coolant type for the vehicle and check the level in the matching tank.
  2. Make sure the waste tank has room for the old coolant.
  3. Select the right step adapter or hose adapter for the vehicle, including the HD adapters for trucks.
  4. Connect the MCX-2HD to the cooling system.
  5. Connect the 12V power supply clips.
  6. Start the exchange and monitor the gauges and fluid level indicators.
  7. Let the machine complete the exchange, usually in less than 3 minutes.
  8. Disconnect the machine and restore the vehicle’s hoses or connections.
  9. Follow the vehicle maker’s procedure to bleed air and top off coolant.
  10. Empty the waste tank into a labeled storage container when needed.

Safety Tips

  • Wear gloves and eye protection when working with coolant.
  • Let a hot engine cool before opening the cooling system.
  • Keep coolant away from children and pets. It can be toxic if swallowed.
  • Clean up spills right away to prevent slips.
  • Store new and used coolant in labeled containers.
  • Train all technicians on the machine before use.

For chemical handling and labeling rules, see the OSHA hazard communication standard.

Handling Used Coolant

Used engine coolant can contain heavy metals and other contaminants picked up from the engine. It should never be poured down a drain or onto the ground. Store used coolant in labeled, closed containers and recycle it or dispose of it through an approved service. The EPA hazardous waste generator guidance and your local rules explain how shops should manage automotive fluids.

MCX-2HD Maintenance Tips

  • Empty the waste tank before it reaches capacity.
  • Clean the new coolant tanks when changing coolant types.
  • Inspect hoses and quick connectors for wear or leaks.
  • Check the adapters for cracks or damage.
  • Inspect the power clips and cable for damage.
  • Keep gauges and level indicators clean and readable.

The MCX-2HD is backed by a 1-year parts and labor warranty.

Signs a Vehicle Needs Coolant Service

Technicians and service advisors can look for several signs that a cooling system needs attention:

  • The vehicle has reached the coolant service interval in its maintenance schedule.
  • The coolant looks rusty, cloudy, or contains debris.
  • Test strips or a refractometer show weak freeze protection.
  • The engine runs hotter than normal.
  • The heater is not producing enough heat.
  • There are signs of leaks, such as residue around hoses or the radiator.

MCX-2HD

MCX-2HD key features

Choosing the Right Coolant

Modern vehicles use several different coolant formulas, and mixing the wrong types can reduce protection. Always check the vehicle owner’s manual or service information for the correct coolant. Label each 15-gallon new coolant tank on the MCX-2HD with the coolant type it holds, and train technicians to confirm the match before every job.

If your shop is also expanding its service bays, our car lifts can help you add capacity.

Making Coolant Service Profitable

Coolant service is a routine maintenance item listed in most vehicle maintenance schedules. A fast, clean exchange makes it easy to offer during oil changes, inspections, and seasonal checkups. With two 15-gallon new coolant tanks, the MCX-2HD lets you stock two common coolant types and serve more vehicles without changing fluids between jobs. Train service advisors to check coolant condition and explain the benefits, and the machine can become a steady source of service revenue.

Keeping the Service Area Clean

Coolant spills are slippery and can be harmful to pets and wildlife. A closed exchange system like the MCX-2HD, with drip-proof tank connectors, helps keep fluid off the floor. Keep absorbent pads and a drip pan handy for hose connections, and clean up any drips right away. Store the machine with the hoses coiled and the tanks capped so it is ready for the next job.

Planning Fluid Service in Your Shop

Many shops group fluid services in one area, with oil, coolant, transmission, and brake fluid equipment close together. Placing the MCX-2HD next to your other fluid machines makes it easy for technicians to offer several services on the same visit. Plan storage for new coolant and used coolant drums close to the machine.

MCX-2HD for Heavy-Duty Trucks

Heavy-duty trucks have large cooling systems and bigger radiator hoses than passenger cars. The MCX-2HD includes an HD truck adapter set with additional step adapters and adapter hoses, so the same machine can service cars, light trucks, and heavy trucks. Fleet shops can use one exchanger across many vehicle types, which saves space and simplifies training.

Why 12V Power Makes Sense

Running on 12 VDC through power supply clips means the MCX-2HD does not need a wall outlet or an air line. Technicians can roll it to any bay or out to a vehicle in the lot. Low-voltage power also keeps the setup simple around coolant and water.

MCX-2HD best uses

Who Should Buy the Mahle MCX-2HD?

  • General auto repair shops
  • Truck and fleet maintenance garages
  • Dealership service departments
  • Quick-lube centers
  • Tire and service centers
  • Shops that service both cars and heavy trucks

If your shop is expanding its bays, our car lifts can help add capacity.

Training Technicians on the MCX-2HD

The MCX-2HD is designed to be simple to use, with clear gauges and visible fluid level indicators. Even so, train every technician before using it on customer vehicles. Walk through choosing the right adapter, connecting the 12V clips, selecting the correct coolant tank, monitoring the exchange, and emptying the waste tank. Keep the operating manual with the machine and post a short checklist nearby. Consistent steps help every coolant service go smoothly and reduce comebacks.

Getting the Most From Your MCX-2HD

Keep both new coolant tanks filled and labeled so technicians never have to stop and search for fluid. Empty the waste tank at the end of each day. Check hoses, connectors, and adapters weekly. Track how many coolant services you perform each month to see how quickly fast service pays off.

Mahle FluidPRO Quality

Mahle is a major supplier of engine and thermal management parts, and its FluidPRO line brings that experience to fluid service equipment. The MCX-2HD’s brass quick connectors with chrome sleeves and silicone seals, automatic shut-off, and pressure protection reflect a design built for daily professional use.

Frequently Asked Questions About the MCX-2HD

How long does an exchange take?

The average full exchange takes less than 3 minutes.

How much old coolant does it replace?

It averages a 92 to 98% single-pass exchange for most vehicles.

What coolant types does it work with?

The MCX-2HD is compatible with all coolant types.

How big are the tanks?

It has two 15-gallon (57 L) new coolant tanks and one 15-gallon waste tank.

What power does it need?

It runs on 12 VDC at 15 amps using power supply clips.

Does it protect the cooling system from pressure?

Yes. A 6 to 12 psi pressure switch protects vehicle cooling systems from high pressure.

What adapters are included?

It includes two sets of universal step adapters, two universal hose adapters, and an HD truck adapter set with additional step adapters and hoses.

How fast are the pumps?

The fill and drain pumps are each rated at 2 gallons per minute.

How much does it weigh?

The MCX-2HD weighs 170 lbs. (77 kg).

What is the warranty?

It has a 1-year parts and labor warranty.

Order the Mahle MCX-2HD Today

The Mahle FluidPRO MCX-2HD multi-coolant exchanger delivers fast, 3-minute coolant service with a 92 to 98% single-pass exchange, two 15-gallon new coolant tanks, 12V power, and an HD truck adapter set. It is built for shops that service everything from cars to heavy trucks. Contact Ironside Garage with questions, and browse our full range of shop equipment.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Mahle FluidPRO MCX-2HD Multi-Coolant Exchanger”

Your email address will not be published. Required fields are marked *

Shipping & Delivery