Ranger RS-500D Professional Spray Wash Cabinet

$11,195.00

Ranger RS-500D Professional Spray Wash Cabinet

SKU: IRG0518 Categories: ,
Description

The Ranger RS-500D is a professional hot-water spray wash cabinet built from heavy-duty 12-gauge steel with an industrial powder coat finish. A 50-gallon tank, dual water heaters, a 70 gpm pump, and a 500-lb. capacity 30-inch turntable let the RS-500D clean greasy automotive parts automatically, with no harsh solvents.

Ranger RS-500D Professional Spray Wash Cabinet

Powerful, Safe and Rapid Hot Wash Spray Cabinet by Ranger

A large cabinet size and solution tank makes the RS-500D versatile and productive. By using an octagonal full-opening door, we’ve enhanced access to the turntable to enhance the operator’s loading capabilities. Simple operating controls, brass nozzles, a gasket-free door and a high-capacity 70 gpm pump demonstrate Ranger’s commitment to enhanced performance and productivity without a single sacrifice in quality. Like all Ranger spray wash cabinets, the RS-500D is built to last. We constructed the cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and powder coat finish. All-around performance, durability and improved operator convenience make the RS-500D the definitive choice among professionals worldwide.

Features

  • Heavy-duty steel construction
  • Safe aqueous operation: No harsh chemicals
  • 50 gallon tank
  • Dual water heaters for quick startup
  • Heated cabinet w/ adjustable thermostat
  • High-power spray jets clean parts fast
  • Automatic low water shutoff
  • Removable tank screen
  • Stainless oil skimmer
  • Removable parts tree
  • Powder coat finish
  • Stainless steel nozzles
  • Full opening octagonal door
  • Large drain pipe
  • Heavy-duty casters
  • Friction-drive turntable system
  • Neoprene-sealed wash cabinet
  • Contamination-proof interior welds
  • Gasket-free door
  • Small parts basket
  • Stainless steel handles
  • Free bucket and soap included

Specifications

Overall height: 66″ (1,676 mm)
Inside height: 43″ (1,092 mm)
Inside width: 32″ (813 mm)
Turntable diameter: 30″ (762 mm)
Tank capacity: 50 gallons
Recommended floor space: 44″ x 43″ (1,118 mm x 1,092 mm)
Load capacity: 500 lbs. (227 kg)
Cycle timer: 0 – 60 min
Brass nozzles: 18
Steel construction: 12 Gauge / .109 thickness
Pump output: 75 psi @ 70 gpm
Motor: 1 HP / 220 VAC / 60 Hz / 1 Ph
Electric heater: 6 kW
Water temperature: 160° – 180° F (71° – 82° C)
Shipping weight: 680 lbs. (308 kg)
Shipping dimensions: 46” x 46” x 68” (1,168 mm x 1,168 mm x 1,727 mm)

RS-500D Specifications

  • Overall height: 66 inches
  • Inside height: 43 inches; inside width: 32 inches
  • Turntable diameter: 30 inches
  • Load capacity: 500 lbs.
  • Tank capacity: 50 gallons
  • Cycle timer: 0–60 minutes
  • Nozzles: 18
  • Pump output: 75 psi at 70 gpm
  • Motor: 1 HP, 220 VAC, 60 Hz, single phase
  • Electric heater: 6 kW
  • Water temperature: 160°–180°F
  • Steel construction: 12 gauge (.109″)
  • Recommended floor space: 44″ x 43″

RS-500D Features

  • Heavy-duty 12-gauge steel cabinet and door
  • Industrial two-step primer and powder coat finish
  • Safe aqueous operation with no harsh chemicals
  • Dual water heaters for quick startup
  • Heated cabinet with adjustable thermostat
  • High-power spray jets
  • Automatic low water shutoff
  • Removable tank screen and stainless oil skimmer
  • Removable parts tree and small parts basket
  • Full-opening octagonal, gasket-free door
  • Friction-drive turntable, neoprene-sealed cabinet, contamination-proof welds
  • Large drain pipe, heavy-duty casters, stainless steel handles
  • Free bucket and soap included

Built to Last

Ranger builds the RS-500D cabinet and door from heavy-duty 12-gauge steel and protects them with an industrial two-step primer and powder coat finish. That combination gives the washer strength and a durable finish that stands up to daily shop use. It’s a proven design trusted by professionals.

Safe Aqueous Cleaning

Instead of harsh solvents, the RS-500D uses hot water and detergent. Aqueous cleaning is safer for technicians, avoids solvent odors, and simplifies waste handling compared with traditional solvent tanks. Parts come out clean without the chemical exposure of hand-scrubbing in solvent.

Quick Startup With Dual Heaters

Dual water heaters bring the 50-gallon tank up to cleaning temperature quickly, so you can start washing sooner. The heated cabinet and adjustable thermostat keep water at 160–180°F for effective degreasing.

RS-500D key specifications

Easy Loading Through the Octagonal Door

A full-opening octagonal door gives wide access to the 30-inch turntable, making it easier to load large, heavy parts. The door is gasket-free, so there’s no gasket to maintain or replace.

Who Should Buy the RS-500D

  • General automotive repair shops
  • Engine and transmission rebuilders
  • Fleet maintenance departments
  • Machine shops
  • Agricultural and heavy equipment shops
  • Industrial maintenance teams

Explore more equipment in our shop equipment section.

RS-500D

How to Use the RS-500D

  1. Fill the tank with water and add spray-cabinet detergent.
  2. Turn on the heaters and set the thermostat; wait for 160–180°F.
  3. Load parts on the turntable, using the parts tree and basket for small items.
  4. Close the octagonal door.
  5. Set the cycle timer and start the wash.
  6. When finished, open the door carefully and unload hot parts with gloves.

Safety Guidelines

Water and parts get very hot, so wear heat-resistant gloves and eye protection. Keep the door closed during cycles. Use the correct 220V electrical supply, installed by a qualified electrician. Follow Ranger’s instructions and local regulations for wastewater disposal.

Maintenance Tips

  • Skim oil regularly with the stainless oil skimmer.
  • Clean the removable tank screen.
  • Drain and clean the tank periodically.
  • Check nozzles for clogs.
  • Inspect the turntable drive.
  • Maintain proper water level to avoid low-water shutoff.

Hands-Free Cleaning Saves Labor

Scrubbing parts by hand is slow and tiring. With the RS-500D, technicians load parts, set the timer, and move on to other work. Engine blocks, transmission cases, and differential housings come out clean without constant attention. Over a week, those saved hours can add up to significant labor savings.

Even Cleaning With the Turntable

The friction-drive turntable rotates parts through the spray pattern so every surface gets cleaned. With a 500-lb. capacity, it handles heavy components easily.

RS-500D vs. Stainless RS-500DS

Ranger also offers a stainless-steel version, the RS-500DS, with the same key features. The RS-500D’s powder-coated 12-gauge steel provides excellent durability at a lower cost, while the stainless version offers maximum rust resistance. Both are capable professional washers; our team can help you choose.

Engine and Transmission Work

Rebuilders need parts that are clean enough to inspect for cracks and measure accurately. The RS-500D’s hot, high-pressure spray removes oil, sludge, and grime from blocks, heads, cases, and housings. With a 43-inch inside height and 32-inch inside width, it fits many large components, so you can clean an entire teardown in just a few cycles.

RS-500D front view

Fleet and Heavy Equipment

Fleet and equipment shops often deal with heavily soiled parts. The RS-500D’s 500-lb. capacity and powerful spray tackle mud, grease, and oil on heavy components. Automated cleaning helps these shops keep up with volume and get vehicles and machines back to work sooner.

Cleaner, Safer Shop

Solvent tanks can leave the shop smelling of chemicals and coated in grime. The RS-500D’s sealed cabinet and aqueous cleaning keep the mess contained. Oil is captured in the tank and removed with the skimmer, and debris is caught by the tank screen. The result is a cleaner, safer work environment.

RS-500D cleaning features

Planning Your Installation

The RS-500D needs about 44 x 43 inches of floor space and stands 66 inches tall. Plan for a 220V single-phase supply sized for the motor and heaters, installed by a qualified electrician. Locate it near an appropriate drain or plan for wastewater collection, and leave room in front for the full-opening door and loading heavy parts, ideally with hoist access.

A Typical Rebuild Day

A transmission rebuilder tears down a unit in the morning. Instead of scrubbing the case, valve body housing, and covers at a solvent tank, the technician loads them onto the RS-500D’s turntable and parts tree, closes the door, and sets the timer. While the cycle runs, they inspect internal components and order parts. When the cycle finishes, the case and covers come out clean, ready for inspection and reassembly. That simple routine saves time on every rebuild.

Choosing the Right Detergent

Use detergents designed for hot-water spray washers. They break down grease and oil effectively, control foaming, and help protect parts and the cabinet. Follow the recommended dilution and check the solution regularly. A free bucket and soap come with the RS-500D to get you started.

Loading for Best Results

Place heavy parts near the center of the turntable and orient them so spray reaches all surfaces. Hang brackets and covers on the parts tree and put small hardware in the basket. Avoid blocking spray with stacked parts. Good loading habits give clean results in a single cycle.

Preventing Flash Rust

Parts come out hot and dry quickly. For bare cast iron or steel parts that won’t be assembled right away, apply a rust preventive or light oil after drying to protect clean surfaces.

RS-500D side view

What Users Appreciate

Users often highlight the RS-500D’s rugged build, generous capacity, and hands-free operation. The quick-heating dual heaters, gasket-free door, and oil skimmer make it easy to live with day to day. For many shops, it’s a long-term workhorse that pays for itself in saved labor.

Why Aqueous Cleaning Is Growing

Many shops are moving away from solvent-based parts washers. Solvents can be harsh on skin, produce strong fumes, and create hazardous waste. Aqueous spray cabinets like the RS-500D use hot water and detergent, which are generally easier to work with and simpler to manage. Combined with automated cleaning, aqueous systems offer a cleaner, more modern approach to parts washing that technicians appreciate.

Machine Shops

Machine shops need clean parts for accurate measurement and machining. Grease and debris can contaminate tools and throw off readings. The RS-500D provides consistently clean components, helping machinists work efficiently and accurately. Clean cores also make it easier to evaluate what can be reused.

Water Management Tips

Hot water evaporates, so check the level daily and top it up. The automatic low water shutoff protects the heaters and pump if the level drops too far. Skim oil and clean the screen regularly, and change the solution when it becomes heavily contaminated, disposing of it according to local regulations. Clean solution means better cleaning results.

Small Parts Organization

The small parts basket and removable parts tree keep bolts, brackets, and covers organized during washing. Cleaning all the parts from one job together makes reassembly easier and reduces the chance of lost components.

RS-500D built tough

Investing in Efficiency

A spray wash cabinet is one of the most practical investments a busy shop can make. The RS-500D saves labor, improves inspection quality, and keeps the shop cleaner. Its rugged steel construction and powder coat finish are built for years of reliable service.

Agricultural and Construction Equipment

Parts from tractors, combines, loaders, and other heavy equipment often arrive caked with mud, grease, and crop residue. Cleaning them by hand is a dirty, time-consuming job. The RS-500D’s hot, high-volume spray strips away that buildup, and its 500-lb. turntable handles heavy housings and hubs. Clean parts are easier to inspect, which helps technicians catch wear and damage early and plan repairs accurately.

RS-500D detail

General Repair Shops

Even general repair shops that don’t rebuild engines regularly clean plenty of parts: brackets, covers, brake components, and more. Having a spray wash cabinet means technicians can clean parts while they work on other tasks, rather than spending time at a sink or solvent tank. It’s a simple way to boost efficiency across the whole shop.

Training Technicians

Using the RS-500D is straightforward. Show technicians how to load parts, set the timer and thermostat, use the skimmer, and safely unload hot parts. Emphasize gloves and eye protection, and explain how to check the water level and solution condition. A short walkthrough is usually enough to get everyone comfortable.

Getting Started

If you’re ready to save time on parts cleaning, the RS-500D is a dependable choice. Contact our team to confirm electrical and drainage needs, ask about detergents, and arrange freight delivery. We’ll help you get set up quickly.

Comparing Parts Cleaning Methods

Shops typically clean parts in one of three ways: hand-scrubbing at a solvent tank, soaking in a dip tank, or using a spray wash cabinet. Solvent tanks are inexpensive but labor-intensive and expose technicians to chemicals. Dip tanks can clean thoroughly but take time and require careful chemical management. Spray wash cabinets like the RS-500D combine heat, pressure, and detergent to clean quickly and automatically, with minimal technician involvement. For shops that clean parts regularly, a spray cabinet often offers the best balance of speed, safety, and cleaning quality.

Durability You Can Count On

Ranger designed the RS-500D for professionals who need dependable equipment. The 12-gauge steel cabinet, two-step primer and powder coat, neoprene-sealed cabinet, contamination-proof welds, and heavy-duty casters all contribute to a washer built for years of daily use. Regular maintenance of the tank, skimmer, screen, and nozzles keeps it running at peak performance.

From quick bracket cleaning to full engine teardowns, the RS-500D makes parts washing faster, safer, and far less messy. Reach out to our team at Ironside Garage with questions about setup, detergents, or delivery.

Getting the Most From Your Washer

To get the best results from the RS-500D, build a few simple habits into your shop routine. Start each day by checking the water level and solution condition. Skim oil before the first load and whenever it builds up. Load parts thoughtfully so the spray reaches every surface, and group parts by job so they stay organized. Clean the tank screen weekly, inspect nozzles for clogs, and change the solution on a regular schedule. These small steps keep the washer cleaning effectively and help it last for many years.

Many shops find that once they have a spray wash cabinet, they wonder how they ever managed without one. Parts come out cleaner, technicians stay productive, and the shop stays tidier. The RS-500D is a practical upgrade that delivers value every single day, whether you clean a few parts a week or dozens every shift, and it gives your team more time for the skilled repair work that matters most to your customers.

With its rugged steel cabinet, hot high-pressure spray, and generous capacity, the RS-500D is a smart choice for any professional shop that wants cleaner parts with less effort, and our team is always ready to help you choose accessories and plan your installation.

It is a reliable, professional-grade parts washer that helps your technicians spend less time cleaning and more time repairing, rebuilding, and getting customer vehicles back on the road where they belong.

Frequently Asked Questions About the RS-500D

What is the load capacity?

500 lbs. on a 30-inch turntable.

How hot does the water get?

160–180°F.

How large is the tank?

50 gallons.

What is the pump output?

75 psi at 70 gallons per minute.

What power does it need?

220 VAC, 60 Hz, single phase, with a 1 HP motor.

Does it use solvents?

No. It uses safe aqueous cleaning with hot water and detergent.

Support From Ironside Garage

Our team can help you plan electrical and drainage requirements and arrange freight delivery of the RS-500D. Contact us with any questions.

Order the RS-500D Today

The Ranger RS-500D is a proven, powerful professional spray wash cabinet. For guidance on wastewater and shop environmental practices, visit the U.S. EPA, and explore our car lifts.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ranger RS-500D Professional Spray Wash Cabinet”

Your email address will not be published. Required fields are marked *

Shipping & Delivery