Robinair 75700 CoolTech Coolant Exchanger
$4,370.00
Robinair 75700 CoolTech Coolant Exchanger
The Robinair 75700 CoolTech coolant exchanger lets technicians perform a complete cooling system exchange in about 10 minutes with the engine off. It runs entirely on 90 psi shop air, needs no electricity, and uses a vacuum mode to create a push/pull exchange that safely removes high pressure from a hot system. A built-in leak check lets you test the system before refilling, and two removable 7-gallon supply tanks let you carry two different coolant types on board.
This guide covers the 75700 specifications, how the exchange process works, setup, maintenance, and common questions. If you are adding shop equipment that speeds up service and adds revenue, the Robinair 75700 is worth a close look.
Robinair 75700 CoolTech Coolant Exchanger
Our 10 minute exchange process means no more waiting for the engine to warm up!
Our Engine Off feature removes pulleys, belts, and fan blades from the safety equation.
Vacuum mode creates a “push/pull” exchange process allowing the technician to safely remove high pressure in a hot system.
Leak check feature allows the technician to test for leaks prior to refilling.
Two clearly marked valves and an easy-to-read gauge make this machine very easy to use.
No electricity required. 90 psi shop air drives the exchange process, as well as the 2 gpm pump on the waste tank.
Two external new coolant supply tanks allow on-board storage of two different coolant types.
Specifications:
Power Supply – 90 psi shop air
Tanks– Internal waste – 15-gallon capacity– External supply (2) 7-gallon capacity (removable)
Dimensions: 47″ H x 26″ W x 33″ D (119 cm x 66 cm x 84 cm)
Medium Step Adapter: Two included; fits hose size 1-1/4″, 1-3/8″, and 1-1/2″
Large Step Adapter: Two included; fits hose size 1-3/4″, 2″, and 2-1/4″
Robinair 75700 Specifications
- Power supply: 90 psi shop air
- Internal waste tank: 15-gallon capacity
- External supply tanks: two 7-gallon tanks (removable)
- Waste tank pump: 2 gpm, air driven
- Dimensions: 47″ H x 26″ W x 33″ D (119 cm x 66 cm x 84 cm)
- Medium step adapters: two included, fit hose sizes 1-1/4″, 1-3/8″, and 1-1/2″
- Large step adapters: two included, fit hose sizes 1-3/4″, 2″, and 2-1/4″
- Electricity: none required
Key Features of the Robinair 75700
10-Minute Exchange Process
The 75700’s exchange process takes about 10 minutes, and there is no need to wait for the engine to warm up. Faster service means more cars through the bay and less time spent on each coolant job.
Engine Off Operation
The Engine Off feature removes pulleys, belts, and fan blades from the safety equation. Because the engine is not running, technicians are not working near moving parts during the exchange.
Vacuum Mode Push/Pull Exchange
Vacuum mode creates a push/pull exchange process. It allows the technician to safely remove high pressure from a hot system before the exchange, reducing the risk of hot coolant spraying out when the system is opened.
Leak Check Feature
The leak check feature lets the technician test for leaks before refilling. Finding a leak before adding new coolant saves fluid and helps catch problems that need repair.
Simple Valves and Gauge
Two clearly marked valves and an easy-to-read gauge make the 75700 very easy to use. Technicians can learn the process quickly.
No Electricity Required
The 75700 runs on 90 psi shop air. Air drives the exchange process and the 2 gpm pump on the waste tank. With no electrical connection, the machine can be used anywhere you have an air line.
Two Supply Tanks
Two external 7-gallon supply tanks provide on-board storage for two different coolant types. The tanks are removable, so they are easy to fill and clean.
Step Adapters Included
Two medium step adapters fit 1-1/4″, 1-3/8″, and 1-1/2″ hoses, and two large step adapters fit 1-3/4″, 2″, and 2-1/4″ hoses. That covers the radiator hose sizes on a wide range of vehicles.
Why Coolant Service Matters
Engine coolant does more than keep an engine from overheating. It also protects against freezing and helps prevent corrosion inside the radiator, water pump, heater core, and engine passages. Over time, coolant breaks down and loses its protective additives. Old coolant can lead to corrosion, scale, and overheating.
Vehicle makers recommend replacing coolant at set intervals. A coolant exchanger like the 75700 replaces old coolant more completely than a simple drain and fill, because it moves fluid through the whole system rather than only draining what is in the radiator.
How the 75700 Exchange Process Works
The technician connects the 75700 to the vehicle’s cooling system using the included step adapters, which fit common radiator hose sizes. With the engine off, the operator uses the marked valves to run the machine through its steps. Vacuum mode first relieves pressure from a hot system and pulls old coolant out. The leak check feature can then be used to confirm the system holds before new coolant goes in.
During the exchange, shop air drives the process. Old coolant is drawn into the 15-gallon internal waste tank, and new coolant from one of the 7-gallon supply tanks is pushed into the system. The gauge lets the technician watch the process. When the job is done, the 2 gpm air-driven pump on the waste tank empties the used coolant into your storage container for recycling or disposal.
Always follow the Robinair operating manual and the vehicle manufacturer’s service procedures, including the correct coolant type and bleeding steps for each vehicle.
Benefits for Your Shop
- Faster service. A 10-minute exchange with no warm-up time keeps bays moving.
- Safer process. Engine-off operation and vacuum pressure relief reduce hazards.
- More complete exchange. Moving fluid through the system replaces more old coolant than a drain and fill.
- Leak detection. The leak check helps find problems before refilling.
- Flexible coolant choices. Two supply tanks let you offer two coolant types.
- Easy to place. No electricity needed, just an air line.
- Added revenue. Coolant service is a common maintenance item that customers need.

Setting Up the 75700
Place the 75700 near your service bays where an air drop is available. The unit measures 47 inches high, 26 inches wide, and 33 inches deep. Connect it to shop air at 90 psi using a hose and fitting that deliver full pressure. Use a water separator to keep moisture out of the air supply.
Fill the external supply tanks with the coolant types you use most. Label each tank clearly so technicians always choose the right fluid for the vehicle. Keep the step adapters stored with the machine so they are easy to find.
Handling Used Coolant
Used engine coolant can contain heavy metals and other contaminants picked up from the engine. It should never be poured down a drain or onto the ground. Store used coolant in labeled, closed containers and recycle it or dispose of it through an approved service. The EPA hazardous waste generator guidance and your local rules explain how shops should manage automotive fluids.
Step-by-Step: A Typical Coolant Exchange
- Confirm the correct coolant type for the vehicle and check that the matching supply tank is full.
- Connect the 75700 to 90 psi shop air.
- With the engine off, connect the machine to the cooling system using the right step adapter.
- Use vacuum mode to relieve pressure and begin removing old coolant.
- Run the leak check to confirm the system holds.
- Use the marked valves to run the exchange, watching the gauge.
- When the exchange is complete, disconnect the machine and reinstall hoses or caps as required.
- Follow the vehicle maker’s procedure for bleeding air from the system and topping off.
- Use the 2 gpm waste pump to empty the waste tank into a storage container.
Safety Tips
- Wear gloves and eye protection when working with coolant.
- Use vacuum mode to relieve pressure before opening a hot system.
- Keep coolant away from children and pets. It can be toxic if swallowed.
- Clean up spills right away to prevent slips.
- Store new and used coolant in labeled containers.
- Train all technicians on the machine before use.
For chemical handling and labeling rules, see the OSHA hazard communication standard.
75700 Maintenance Tips
- Empty the waste tank after each job or when it nears capacity.
- Clean the supply tanks when changing coolant types.
- Inspect hoses and adapters for cracks or wear.
- Check fittings for air and fluid leaks.
- Use clean, dry air to protect the air-driven components.
- Keep the gauge clean and readable.
Who Should Buy the Robinair 75700?
- General auto repair shops
- Quick-lube and oil change centers
- Dealership service departments
- Fleet maintenance garages
- Tire and service centers
- Shops that want to add coolant service


Coolant Exchange vs. Drain and Fill
A basic drain and fill only removes the coolant that drains out of the radiator. A large share of the old coolant stays in the engine block, heater core, and hoses, where it mixes with the new fluid. The result is diluted coolant that may not give full protection.
An exchange machine like the 75700 moves fluid through the whole cooling system. Old coolant is pulled out while new coolant goes in, so more of the old fluid is replaced. Customers get better protection, and the shop gets a faster, cleaner process with less mess on the floor.
Why Air Power Makes Sense
Most shops already have compressed air in every bay. Because the 75700 runs on 90 psi shop air, it needs no electrical outlet and no extension cords near coolant. Air drives both the exchange and the 2 gpm waste pump, which keeps the design simple. Fewer electrical parts also mean fewer parts that can fail in a wet environment.
Making Coolant Service Profitable
Coolant service is a routine maintenance item listed in most vehicle maintenance schedules. A fast, clean exchange makes it easy to offer during oil changes, inspections, and seasonal checkups. With two supply tanks, the 75700 lets you stock two common coolant types and serve more vehicles without changing fluids between jobs. Train service advisors to check coolant condition and explain the benefits, and the machine can become a steady source of service revenue.
Choosing the Right Coolant
Modern vehicles use several different coolant formulas, and mixing the wrong types can reduce protection. Always check the vehicle owner’s manual or service information for the correct coolant. Label each 7-gallon supply tank on the 75700 with the coolant type it holds, and train technicians to confirm the match before every job.
If your shop is also expanding its service bays, our car lifts can help you add capacity.
Signs a Vehicle Needs Coolant Service
Technicians and service advisors can look for several signs that a cooling system needs attention:
- The vehicle has reached the coolant service interval in its maintenance schedule.
- The coolant looks rusty, cloudy, or contains debris.
- Test strips or a refractometer show weak freeze protection.
- The engine runs hotter than normal.
- The heater is not producing enough heat.
- There are signs of leaks, such as residue around hoses or the radiator.
The 75700’s leak check helps confirm whether the system holds pressure, which is useful when a customer reports coolant loss. If the system does not pass, the shop can recommend repairs before performing the exchange.
Training Technicians on the 75700
The 75700 is designed to be easy to learn. Two clearly marked valves and one easy-to-read gauge keep the controls simple. Still, every technician should be trained before using it on customer vehicles. Walk through the steps with a new technician several times, from connecting the adapters to emptying the waste tank. Keep the operating manual near the machine, and post a short checklist that covers coolant type, pressure relief, leak check, exchange, and bleeding.
Consistent procedures help every coolant job go smoothly and reduce comebacks.

Keeping the Service Area Clean
Coolant spills are slippery and can be harmful to pets and wildlife. A closed exchange system like the 75700 helps keep fluid off the floor. Keep absorbent pads and a drip pan handy for hose connections, and clean up any drips right away. Store the machine with the hoses coiled and the tanks capped so it is ready for the next job.
Planning Fluid Service in Your Shop
Many shops group fluid services in one area, with oil, coolant, transmission, and brake fluid equipment close together. Placing the 75700 next to your other fluid machines makes it easy for technicians to offer several services on the same visit. Make sure an air drop is nearby, and plan storage for new coolant and used coolant drums close to the machine.
Robinair Quality
Robinair is a well-known name in automotive service equipment, especially for fluid and air conditioning service tools. The 75700 CoolTech brings that experience to coolant service with a simple, air-driven design. Its straightforward controls, removable supply tanks, and included adapters make it a practical tool for busy shops that want dependable equipment without complicated electronics.
Getting the Most From Your 75700
Keep the supply tanks filled and labeled so technicians never have to stop and look for coolant. Empty the waste tank at the end of each day so the machine is ready in the morning. Check the adapters and hoses weekly for wear. Track how many coolant services you perform each month, and you will see how quickly a fast, easy exchange machine pays off. Small habits like these keep the 75700 working well and help your team deliver consistent coolant service to every customer.
Before you order, confirm that your shop air system can supply a steady 90 psi at the bay where the machine will be used, and decide where used coolant will be stored. A little planning makes the first coolant job on the new machine quick and easy.
Frequently Asked Questions About the 75700
How long does an exchange take?
The 75700 exchange process takes about 10 minutes, with no need to warm up the engine.
Does the engine need to run?
No. The Engine Off feature lets you service the system with the engine off.
Does it need electricity?
No. It runs on 90 psi shop air.
How big is the waste tank?
The internal waste tank holds 15 gallons.
How many supply tanks does it have?
It has two removable external supply tanks, each holding 7 gallons.
What does vacuum mode do?
Vacuum mode creates a push/pull exchange and lets the technician safely remove high pressure from a hot system.
Can it check for leaks?
Yes. The leak check feature tests for leaks before refilling.
What hose sizes do the adapters fit?
Medium adapters fit 1-1/4″, 1-3/8″, and 1-1/2″ hoses. Large adapters fit 1-3/4″, 2″, and 2-1/4″ hoses. Two of each are included.
How big is the machine?
It measures 47 inches high, 26 inches wide, and 33 inches deep.
Order the Robinair 75700 Today
The Robinair 75700 CoolTech coolant exchanger delivers a fast, engine-off, air-powered coolant exchange with vacuum pressure relief, leak checking, and two on-board supply tanks. It helps your shop offer better coolant service in less time. Contact Ironside Garage with questions, and browse our full range of shop equipment.
Related products
Atlas SBC420 Standard Sandblast Cabinet with Vacuum
Atlas SBC420 Standard Sandblast Cabinet with Vacuum The Atlas® SBC420 sandblast cabinet features dual side doors and a large front door for easy loading and unloading. The lower hopper stores the abrasive material for reuse or easy removal. The SBC420 cabinet is always ready when you are. The cabine
Atlas SBC990 Large Sandblast Cabinet with Vacuum
Atlas SBC990 Large Sandblast Cabinet with Vacuum The Atlas SBC990 sandblast cabinet has many of the same features of the entry level Atlas® SBC420 blasting cabinet with added interior space and an extra large front/top loading door. That extra work space and larger opening allow the user to blast ev

Reviews
There are no reviews yet.