Challenger CL10AV3 10,000 lb ALI Certified Versymmetric Two-Post Adjustable Lift

$7,147.00

Challenger’s CL10V3 model features our exclusive Versymmetric ® technology to allow you to service the widest range of vehicles and maximize your bottom line. 3-stage front and 3-stage rear arms with our industry-first directSPOT™ design eliminate the need to shuffle a vehicle back and forth to swin

SKU: IRG0055 Categories: ,
Description

Looking for a reliable two post lift? The Challenger CL10AV3 delivers the durability, safety and ease of use that busy service bays demand. This page covers the Challenger CL10AV3 features, specifications, installation planning and care so you can buy with confidence.

Challenger CL10AV3 Features and Specifications

  • 10,000 lbs. lift capacity
  • Versymmetric® offset front arms provide directSPOT™ to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential
  • Oversized 5 in. diameter pulley and heavy duty 5/16 in. cable reduces stress on equalization system and increases cable life
  • 48 in. elongated carriage design increases lift life
  • Three settings for width adjustment, from 11′ 6.5″ to 12′ 6.5″
  • Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available
  • Padded overhead shut off system prevents vehicle damage
  • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
  • Fully gusseted base plate design increases column rigidity
  • Pulley-less jacketed single-point lock release system makes for smoother, easier operation and longer life
  • Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
  • Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
  • Premium powder coat finish provides long-lasting durability
  • ALI® Certified
Model Number CL10AV3
Lifting Capacity 10,000 lbs.
Lift Configuration Standard
Arms 3-stage front/3-stage rear
Rise Height 74.125”
Overall Height 11′ 2″ or 11′ 8″
Overall Height (Cylinder Extended) 11′ 11″
2’ Height Extension Available Yes
3’ Height Extension Available Yes
Overall Width 11′ 6.5″ / 12′ .5″ / 12′ 6.5″
Drive-Thru Clearance 100″ / 106″ / 112″
Floor to Overhead Switch 10′ 8.5″ – 11′ 2.5″
Front Arm Reach 20” – 42”
Rear Arm Reach 37.625” – 60”
Screw Pad Height 3.875” – 6.125”
Inside Columns 110″ / 116″ / 122″
Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph
Speed of Rise 38 s
Ceiling Height Required 12′
ALI/ETL Certified Yes
Colors Available Red, Blue, Black

Challenger CL10AV3 Photos

Challenger CL10AV3 two post liftChallenger CL10AV3 two post lift view 2Challenger CL10AV3 two post lift view 3Challenger CL10AV3 two post lift view 4

Key Highlights of the Challenger CL10AV3

Here is a quick summary of what stands out on this two post lift:

  • 10,000 lbs. lift capacity
  • 48 in. elongated carriage design increases lift life
  • Three settings for width adjustment, from 11′ 6.5″ to 12′ 6.5″
  • Standard model fits 12 foot ceiling height. Additional 2 foot or 3 foot extensions available
  • Padded overhead shut off system prevents vehicle damage

Why Shops Choose the Challenger CL10AV3

c => `The ${c.kw} is designed around the things that matter in a working bay: a stable lifting platform, dependable locks, and controls that are simple for every technician to learn. Whether you run a busy repair shop, a dealership service lane or a serious home garage, a quality ${c.noun} pays for itself in speed and comfort.`

Benefits of a Quality Two Post Lift

The best two post lift is the one your team can count on every single day. Strong construction, simple controls and solid manufacturer support all add up to more completed jobs and fewer interruptions.

Common Uses for the Challenger CL10AV3

c => `Typical jobs on a ${c.noun} include brake and suspension work, tire rotations, oil changes, exhaust repair, transmission service and general inspections. Depending on configuration, the ${c.kw} can serve passenger cars, SUVs, light trucks and vans. Always confirm that the vehicle weight and wheelbase fall within the published specifications before lifting.`

Installation and Setup

c => `Before installing any ${c.noun}, verify ceiling height, bay width and concrete thickness and strength against the manufacturer’s requirements. Most installations call for level, cured concrete and correctly sized anchors. We recommend professional installation by a qualified lift installer, and our team can help you confirm power requirements, shipping details and site preparation before your ${c.kw} arrives.`

Safety and Maintenance Tips for the Challenger CL10AV3

c => `Safe lifting starts with training. Make sure every operator understands how to position the vehicle, set lift points and lower the ${c.noun} onto its locks. Keep the area under and around the ${c.kw} clear, follow the manufacturer’s maintenance schedule and schedule a yearly professional inspection.`

Buy the Challenger CL10AV3 from Ironside Garage

Ironside Garage carries a wide selection of professional equipment. Browse our full range of Two Post Lifts to compare models, capacities and features side by side. Our team can answer questions about specifications, freight delivery and installation planning, so contact us any time for help choosing the right two post lift for your shop.

For product manuals, technical documentation and manufacturer details, visit the official Challenger website.

Challenger CL10AV3 FAQs

Do I need special concrete for the Challenger CL10AV3?

Most lifts require a minimum concrete thickness and strength. Check the installation manual for the Challenger CL10AV3 or contact us and we will confirm the requirements for your floor.

Is professional installation recommended?

Yes. A qualified installer will anchor, level and test the two post lift correctly, which protects your investment and your technicians.

How is the Challenger CL10AV3 shipped?

Large equipment ships by freight. See our shipping policy for details, or contact us for a delivery estimate to your location.

Does the Challenger CL10AV3 come with a warranty?

Yes. Coverage is provided by the manufacturer. Review our warranty page or ask our team for the specific terms on this model.

Choosing the Right Two Post Lift

When comparing equipment, start with your workload. Consider the vehicles or jobs you handle most, the space available in your bay and the power and air supply in your building. The Challenger CL10AV3 is a strong option for shops that want reliable everyday performance, but our team is happy to compare it against other models so you get exactly the right fit.

It also pays to think about the future. Choosing a two post lift with room to grow helps your shop take on new types of work without replacing equipment early. Ask us about matching accessories, add-ons and complementary equipment that work alongside this model.

What to Expect After You Order

After you place your order, our team confirms availability and delivery details with you. Large equipment typically ships by freight, and we will help you plan for unloading and placement on arrival. Inspect the shipment carefully at delivery and note any visible damage on the delivery receipt before signing.

Once your equipment is in place, read the operator manual completely before first use. Train every person who will use the equipment, keep the manual in an accessible place and follow the recommended maintenance schedule from day one. Questions along the way? We are here to help.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Challenger CL10AV3 10,000 lb ALI Certified Versymmetric Two-Post Adjustable Lift”

Your email address will not be published. Required fields are marked *

Shipping & Delivery